Analysis of Bending Effects for Optical-Bus-Couplers

Goal of the presented work is the development of an optical bus-coupler, which enables easy connection between two waveguides without interrupting the bus. It is possible to realize optical bus systems by connecting several modules onto one waveguide with a core-core-coupler. In this paper we present the concept of a bus-coupler, which is suitable for a bidirectional coupling with a definable ratio. In order to tune the coupling efficiency bended flexible planar waveguides are used, which are pressed onto the bus with a defined force adjusting the overlap area of the two coupling waveguides. We will introduce the manufacturing of the multimode waveguides on flexible substrates by photolithographic structuring. Furthermore, we present results of our investigations on the behavior of planar waveguides under bending in terms of optical losses and power distribution within the waveguide core. Based on the experimental results we will derive the requirements and design rules for the coupling element.

[1]  K. Wolter,et al.  Electro-optical printed circuit board (EOPCB) , 2000, 2000 Proceedings. 50th Electronic Components and Technology Conference (Cat. No.00CH37070).

[2]  W. Macdonald,et al.  Latest advances in substrates for flexible electronics , 2007 .

[3]  Matthias A. Hein,et al.  Geometrical tolerance of optical fiber and laser diode for passive alignment using LTCC technology , 2015, 2015 German Microwave Conference.

[4]  Luca Maggi,et al.  A novel method to couple light into an optical fiber avoiding fiber optic connectors , 2008, SPIE Photonics Europe.

[5]  K. Goossen,et al.  Free-space input and output coupling to an embedded fiber optic strain sensor: dual-ended interrogation via transmission , 2011 .

[6]  Ioannis Papakonstantinou,et al.  Transition, radiation and propagation loss in polymer multimode waveguide bends. , 2007, Optics express.

[7]  Joerg Franke,et al.  Aerosol Jet® printing of optical waveguides , 2015, 2015 38th International Spring Seminar on Electronics Technology (ISSE).

[8]  Karlheinz Bock,et al.  Multichannel optical link based on polymer multimode waveguides for board-level interchip communication , 2015, 2015 European Microelectronics Packaging Conference (EMPC).

[9]  K.W. Goossen,et al.  Normal Incidence Free Space Optical Data Porting to Embedded Communication Links , 2008, IEEE Transactions on Components and Packaging Technologies.

[10]  Carmen Vázquez García,et al.  A Self-Referencing Intensity Based Polymer Optical Fiber Sensor for Liquid Detection , 2009, Sensors.

[11]  T. Lamprecht,et al.  High-Precision, Self-Aligned, Optical Fiber Connectivity Solution for Single-Mode Waveguides Embedded in Optical PCBs , 2015, Journal of Lightwave Technology.

[12]  G. Delrosso,et al.  Development of a gigabit Ethernet Fiber Optic Media Converter module to meet European trend in FTTH architectures , 2008, 2008 2nd Electronics System-Integration Technology Conference.

[13]  Ralf Rieske,et al.  Demonstration of board-level optical link with ceramic optoelectronic multi-chip module , 2009, 2009 59th Electronic Components and Technology Conference.

[14]  Ronny Henker,et al.  Performance of step index multimode waveguides with tuned numerical aperture for on-board optical links , 2014, Photonics West - Optoelectronic Materials and Devices.

[15]  Tolga Tekin,et al.  Review of Packaging of Optoelectronic, Photonic, and MEMS Components , 2011, IEEE Journal of Selected Topics in Quantum Electronics.