Characteristics of a Metal-Backed Loop Antenna and its Application to a High-Frequency RFID Smart Shelf

In this paper, a metal-backed loop antenna (MBLA) at high frequency (HF) is characterized and applied to a radio-frequency identification (RFID) smart-shelf system. The antenna is investigated in terms of impedance matching, resonant frequency, magnetic-field intensity/field distribution, quality factor, and detection range. The study shows that the magnetic-field distribution of the metal-backed loop antenna can be effectively controlled by changing the size as well as the separation of the backing metal plate. As a result, the detection range of an RFID system using such an antenna can be controlled. Such a feature offers great promise for the metal-backed loop antenna in applications for RFID smart-shelf systems. For such systems, controlling the coupling zone of the antennas is vital for constraining the interference between the antennas in adjacent tiers of the shelves, in order to achieve high system-detection accuracy. In addition, using a metal-backed loop antenna provides more flexibility for RFID smart-shelf-system design and implementation, so that the system is more cost effective.

[1]  Tai Tsun Wu,et al.  Theory of the Thin Circular Loop Antenna , 1962 .

[2]  Lam Nhat An,et al.  The eccentrically insulated circular-loop antenna and the horizontal circular-loop antenna near a planar interface , 1981 .

[3]  C. Monzon.  A loop antenna in front of a resistive sheet , 1996 .

[4]  T. Nakajima,et al.  A loop antenna on a chip dielectric material backed by a finite-size conducting plane , 2003, 2003 IEEE Topical Conference on Wireless Communication Technology.

[5]  Leena Ukkonen,et al.  Read range performance comparison of compact reader antennas for a handheld UHF RFID reader [Supplement, Applications & Practice] , 2007, IEEE Communications Magazine.

[6]  Robert L. Thomas.  A practical introduction to impedance matching , 1976 .

[7]  D. J. Angelakos,et al.  Scattering from conducting loops and solution of circular loop antennas by numerical methods , 1965 .

[8]  P. Jonsson,et al.  Performance degradation of RFID system due to the distortion in RFID tag antenna , 2001, 11th International Conference 'Microwave and Telecommunication Technology'. Conference Proceedings (IEEE Cat. No.01EX487).

[9]  P. Kennedy,et al.  Loop antenna measurements , 1956 .

[10]  L. Ukkonen,et al.  Read Range Performance Comparison of Compact Reader Antennas for a Handheld UHF RFID Reader , 2007, 2007 IEEE International Conference on RFID.

[11]  S. D. Gedney,et al.  Effect of a finite ground plane on radiated emissions from a circular loop antenna , 1994 .

[12]  Ronold W. P. King,et al.  Self- and mutual admittances of two identical circular loop antennas in a conducting medium and in air , 1966 .

[13]  J. Landt,et al.  The history of RFID , 2005, IEEE Potentials.

[14]  H. Reichl,et al.  Performance analysis of polymer based antenna-coils for RFID , 2002, 2nd International IEEE Conference on Polymers and Adhesives in Microelectronics and Photonics. POLYTRONIC 2002. Conference Proceedings (Cat. No.02EX599).

[15]  Y. Yamada,et al.  Extremely Small Antennas for RFID Tags , 2006, 2006 10th IEEE Singapore International Conference on Communication Systems.

[16]  Kyutae Lim,et al.  Design and modeling of embedded 13.56 MHz RFID antennas , 2005, 2005 IEEE Antennas and Propagation Society International Symposium.

[17]  R. A. Burberry,et al.  Antenna problems in RFID systems , 1999 .

[18]  C. Harrison,et al.  Folded dipoles and loops , 1961 .

[19]  P. Nikitin,et al.  Antenna design for UHF RFID tags: a review and a practical application , 2005, IEEE Transactions on Antennas and Propagation.

[20]  L. Shafai,et al.  Characteristics of circular loop antennas above a lossless ground plane , 1981 .

[21]  Ronold W. P. King,et al.  The admittance of bare circular loop antennas in a dissipative medium , 1964 .

[22]  Jiro Iwashige.  Analysis of loop antenna with circular reflector and its properties , 1980 .