A finite element investigation on plaque vulnerability in realistic healthy and atherosclerotic human coronary arteries

Atherosclerosis is the most common arterial disease. It has been shown that stresses that are induced during blood circulation can cause plaque rupture and, in turn, lead to thrombosis and stroke. In this study, finite element method is used to predict plaque vulnerability based on peak plaque stress using human samples. A total of 23 healthy and atherosclerotic human coronary arteries of 14 healthy and 9 atherosclerotic patients are excised within 5 h postmortem. The samples are mounted on an uniaxial tensile test machine, and the obtained mechanical properties are used in two-dimensional and three-dimensional finite element models. The results including the Neo–Hookean hyperelastic coefficients of the samples as well as peak plaque stresses are analyzed. The results indicate that the atherosclerotic human coronary arteries have significantly (p < 0.05) higher stiffness compared with the healthy ones. The hypocellular plaque also has the highest stress values and, as a result, is most likely (vulnerable) to rupture, while the calcified type has the lowest stress values and, consequently, is expected to remain stable. The results could be used in the plaque vulnerability anticipation and have clinical implications in interventions and surgeries, including balloon angioplasty, bypass, and stenting.

[1]  S. Chua,et al.  Finite element simulation of slotted tube (stent) with the presence of plaque and artery by balloon expansion , 2004 .

[2]  P. Hoskins,et al.  Measurement of arterial stiffness in subjects with vascular disease: Are vessel wall changes more sensitive than increase in intima-media thickness? , 2009, Atherosclerosis.

[3]  M. Emoto,et al.  Arterial stiffness predicts cardiovascular death independent of arterial thickness in a cohort of hemodialysis patients. , 2010, Atherosclerosis.

[4]  G. Holzapfel.  Determination of material models for arterial walls from uniaxial extension tests and histological structure. , 2006, Journal of theoretical biology.

[5]  G. Manley,et al.  Abrupt increase in rat carotid blood flow induces rapid alteration of artery mechanical properties. , 2011, Journal of the mechanical behavior of biomedical materials.

[6]  R. Shadwick,et al.  Mechanical anisotropy of inflated elastic tissue from the pig aorta. , 2010, Journal of biomechanics.

[7]  J. Kaufman,et al.  Changes in atherosclerotic plaques induced by inhalation of diesel exhaust. , 2011, Atherosclerosis.

[8]  H. Walker,et al.  2D and 3D multi-physics models for flow and nonlinear stress/strain analysis of stenotic arteries with lipid cores , 2003 .

[9]  Dalin Tang,et al.  3D MRI-Based Multicomponent FSI Models for Atherosclerotic Plaques , 2004, Annals of Biomedical Engineering.

[10]  G. Kassab,et al.  A linearized and incompressible constitutive model for arteries. , 2011, Journal of theoretical biology.

[11]  G. Holzapfel,et al.  Methods to compute 3D residual stress distributions in hyperelastic tubes with application to arterial walls , 2010 .

[12]  Jordi Alastruey,et al.  Theoretical models for coronary vascular biomechanics: progress & challenges. , 2011, Progress in biophysics and molecular biology.

[13]  M Doblaré,et al.  Experimental study and constitutive modelling of the passive mechanical properties of the porcine carotid artery and its relation to histological analysis: Implications in animal cardiovascular device trials. , 2011, Medical engineering & physics.

[14]  C. Yuan,et al.  A negative correlation between human carotid atherosclerotic plaque progression and plaque wall stress: in vivo MRI-based 2D/3D FSI models. , 2008, Journal of Biomechanics.

[15]  M. Cai,et al.  IVUS-based computational modeling and planar biaxial artery material properties for human coronary plaque vulnerability assessment. , 2012, Molecular & cellular biomechanics : MCB.

[16]  S. Cescotto,et al.  Experimental verification of brain tissue incompressibility using digital image correlation. , 2011, Journal of the mechanical behavior of biomedical materials.

[17]  Antheunis Versluis,et al.  Fatigue and plaque rupture in myocardial infarction. , 2006, Journal of biomechanics.

[18]  E. Wellnhofer,et al.  Non-dimensional modeling in flow simulation studies of coronary arteries including side-branches: a novel diagnostic tool in coronary artery disease. , 2011, Atherosclerosis.

[19]  Erling Falk,et al.  Mechanical stresses in carotid plaques using MRI-based fluid-structure interaction models. , 2008, Journal of biomechanics.

[20]  D. Ku,et al.  3D MRI-based anisotropic FSI models with cyclic bending for human coronary atherosclerotic plaque mechanical analysis. , 2009, Journal of biomechanical engineering.

[21]  L Speelman,et al.  Initial stress in biomechanical models of atherosclerotic plaques. , 2011, Journal of biomechanics.

[22]  Dalin Tang,et al.  Planar biaxial characterization of diseased human coronary and carotid arteries for computational modeling. , 2012, Journal of biomechanics.

[23]  Gerhard Sommer,et al.  Determination of layer-specific mechanical properties of human coronary arteries with nonatherosclerotic intimal thickening and related constitutive modeling. , 2005, American journal of physiology. Heart and circulatory physiology.

[24]  A D Hughes,et al.  Blood flow and vessel mechanics in a physiologically realistic model of a human carotid arterial bifurcation. , 2000, Journal of biomechanics.

[25]  Lijing L. Yan,et al.  Porcine carotid arterial material property alterations with induced atheroma: an in vivo study. , 2005, Medical engineering & physics.

[26]  Dalin Tang,et al.  An experimental study on the ultimate strength of the adventitia and media of human atherosclerotic carotid arteries in circumferential and axial directions. , 2009, Journal of biomechanics.

[27]  Martin J Graves,et al.  Stress analysis of carotid plaque rupture based on in vivo high resolution MRI. , 2006, Journal of biomechanics.

[28]  P. Prendergast,et al.  Cardiovascular stent design and vessel stresses: a finite element analysis. , 2005, Journal of biomechanics.

[29]  F. Auricchio,et al.  Mechanical behavior of coronary stents investigated through the finite element method. , 2002, Journal of biomechanics.

[30]  A. Pitsillides,et al.  Using digital image correlation to determine bone surface strains during loading and after adaptation of the mouse tibia. , 2010, Journal of biomechanics.

[31]  Patrick Segers,et al.  Identifying the vulnerable plaque: A review of invasive and non-invasive imaging modalities , 2008 .

[32]  K. Chinzei,et al.  Mechanical properties of brain tissue in tension. , 2002, Journal of biomechanics.

[33]  Takafumi Hiro,et al.  Longitudinal structural determinants of atherosclerotic plaque vulnerability: a computational analysis of stress distribution using vessel models and three-dimensional intravascular ultrasound imaging. , 2005, Journal of the American College of Cardiology.

[34]  Dalin Tang,et al.  Sites of Rupture in Human Atherosclerotic Carotid Plaques Are Associated With High Structural Stresses: An In Vivo MRI-Based 3D Fluid-Structure Interaction Study , 2009, Stroke.

[35]  Narayan Yoganandan,et al.  Mechanics of fresh, refrigerated, and frozen arterial tissue. , 2007, The Journal of surgical research.

[36]  Jaydev P. Desai,et al.  Estimating zero-strain states of very soft tissue under gravity loading using digital image correlation , 2010, Medical Image Anal..

[37]  James D Cameron,et al.  Determinants of coronary artery compliance in subjects with and without angiographic coronary artery disease. , 2002, Journal of the American College of Cardiology.

[38]  Yiannis S Chatzizisis,et al.  Coronary hemodynamics and atherosclerotic wall stiffness: a vicious cycle. , 2007, Medical hypotheses.

[39]  Gioacchino Viggiani,et al.  Fracture mechanisms in soft rock: Identification and quantification of evolving displacement discontinuities by extended digital image correlation , 2011 .

[40]  Caitríona Lally,et al.  Tensile and compressive properties of fresh human carotid atherosclerotic plaques. , 2009, Journal of biomechanics.

[41]  R. Banerjee,et al.  Influence of arterial wall-stenosis compliance on the coronary diagnostic parameters. , 2011, Journal of biomechanics.

[42]  Zihui Xia,et al.  A general finite element analysis method for balloon expandable stents based on repeated unit cell (RUC) model , 2007 .

[43]  Caitríona Lally,et al.  The influence of plaque composition on underlying arterial wall stress during stent expansion: the case for lesion-specific stents. , 2009, Medical engineering & physics.

[44]  F. Auricchio,et al.  Carotid artery stenting simulation: from patient-specific images to finite element analysis. , 2011, Medical engineering & physics.

[45]  J. Gillard,et al.  Association between biomechanical structural stresses of atherosclerotic carotid plaques and subsequent ischaemic cerebrovascular events--a longitudinal in vivo magnetic resonance imaging-based finite element study. , 2010, European journal of vascular and endovascular surgery : the official journal of the European Society for Vascular Surgery.

[46]  A. von Eckardstein,et al.  Rupture of the Atherosclerotic Plaque: Does a Good Animal Model Exist? , 2003, Arteriosclerosis, thrombosis, and vascular biology.

[47]  Jacques Ohayon,et al.  Mapping elasticity moduli of atherosclerotic plaque in situ via atomic force microscopy. , 2011, Journal of structural biology.