Forced vibrations of SC-cut quartz crystal rectangular plates with partial electrodes by the Lee plate equations.
暂无分享,去创建一个
Ji Wang | Jianke Du | T. Ma | R. Wu | Wen-jun Wang | Gui-jia Chen
[1] Ji Wang,et al. Resonances and energy trapping in AT-cut quartz resonators operating with fast shear modes driven by lateral electric fields produced by surface electrodes. , 2015, Ultrasonics.
[2] Z. Qian,et al. Thickness-shear and thickness-twist modes in an AT-cut quartz acoustic wave filter. , 2015, Ultrasonics.
[3] Ji Wang,et al. An analysis of thickness-shear vibrations of doubly-rotated quartz crystal plates with the corrected first-order mindlin plate equations , 2013, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.
[4] Ji Wang,et al. Correction factors for mindlin plate equations with the consideration of stiffness and mass effects of electodes for SC-cut quartz crystal plates , 2012, Symposium on Piezoelectricity, Acoustic Waves and Device Applications.
[5] Ji Wang,et al. Correction factors of the mindlin plate equations with the consideration of electrodes [Correspondence] , 2012, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.
[6] Ji Wang,et al. The fifth-order overtone vibrations of quartz crystal plates with corrected higher-order mindlin plate equations , 2012, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.
[7] Ji Wang,et al. Correction factors of the Mindlin plate equations for vibrations of SC-cut quartz crystal plates , 2012, 2012 IEEE International Ultrasonics Symposium.
[8] Ji Wang,et al. The correction factors of mindlin plate theory with and without electrodes for SC-cut quartz crystal plates , 2011, 2011 Symposium on Piezoelectricity, Acoustic Waves and Device Applications (SPAWDA).
[9] Ji Wang,et al. The calculation of electrical parameters of AT-cut quartz crystal resonators with the consideration of material viscosity. , 2011, Ultrasonics.
[10] Ji Wang,et al. The calculation of electrical parameters of overtone thickness-shear quartz crystal resonators with the higher-order Mindlin plate equations , 2010, 2010 IEEE International Ultrasonics Symposium.
[11] Ji Wang,et al. The fifth-order overtone vibrations of quartz crystal plates with higher-order Mindlin plate equations , 2009, 2009 IEEE International Frequency Control Symposium Joint with the 22nd European Frequency and Time forum.
[12] Ji Wang,et al. The analysis of the third-order thickness-shear overtone vibrations of quartz crystal plates with Mindlin plate theory , 2008, 2008 IEEE Ultrasonics Symposium.
[13] Ji Wang,et al. Lee plate equations for electroded quartz crystal plates with the consideration of electrode density and stiffness , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.
[14] Ji Wang,et al. Correction Factors for Mindlin Higher-order Plate Theory with the Consideration of Electrodes , 2007, 2007 IEEE International Frequency Control Symposium Joint with the 21st European Frequency and Time Forum.
[15] Raymond D. Mindlin,et al. An Introduction to the Mathematical Theory of Vibrations of Elastic Plates , 2006 .
[16] Ji Wang. Consideration of stiffness and mass effects of relatively thicker electrodes with Mindlin plate theory. , 2006, IEEE transactions on ultrasonics, ferroelectrics, and frequency control.
[17] P. C. Lee. An accurate two-dimensional theory of vibrations of isotropic, elastic plates , 2006, 2006 IEEE International Frequency Control Symposium and Exposition.
[18] Ji Wang,et al. The determination of the optimal length of crystal blanks in quartz crystal resonators. , 2005, IEEE transactions on ultrasonics, ferroelectrics, and frequency control.
[19] Ji Wang,et al. On the correction of the higher-order Mindlin plate theory , 2005 .
[20] Pcy Lee,et al. Second-order theories for extensional vibrations of piezoelectric crystal plates and strips , 2002, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.
[21] T. Imai,et al. A new theory for electroded piezoelectric plates and its finite element application for the forced vibrations of quartz crystal resonators , 2000 .
[22] Pcy Lee,et al. Mechanical effects of electrodes on the vibrations of quartz crystal plates , 2000, Proceedings of the 2000 IEEE/EIA International Frequency Control Symposium and Exhibition (Cat. No.00CH37052).
[23] Pcy Lee,et al. A new two-dimensional theory for vibrations of piezoelectric crystal plates with electroded faces , 1998 .
[24] Pcy Lee,et al. Piezoelectrically forced vibrations of rectangular SC-cut quartz plates , 1997, Proceedings of International Frequency Control Symposium.
[25] Ji Wang,et al. Finite element analysis of the piezoelectric vibrations of quartz plate resonators with higher-order plate theory , 1997, Proceedings of International Frequency Control Symposium.
[26] Stavros Syngellakis,et al. A two‐dimensional theory for high‐frequency vibrations of piezoelectric crystal plates with or without electrodes , 1987 .
[27] Pcy Lee,et al. Vibrations of Doubly-Rotated Piezoelectric Crystal Strip with a Pair of Electrode-Plated, Traction-Free Edges , 1985, Annual Symposium on Frequency Control.
[28] Raymond D. Mindlin,et al. Frequencies of piezoelectrically forced vibrations of electroded, doubly rotated, quartz plates , 1984 .
[29] Pcy Lee,et al. Approximate theory of vibration of crystal plates at high frequencies , 1974 .
[30] Raymond D. Mindlin,et al. High frequency vibrations of piezoelectric crystal plates , 1972 .
[31] Pcy Lee,et al. An approximate theory for high-frequency vibrations of elastic plates , 1972 .
[32] R. Bechmann,et al. Elastic and Piezoelectric Constants of Alpha-Quartz , 1958 .
[33] Raymond D. Mindlin,et al. Forced Thickness-Shear and Flexural Vibrations of Piezoelectric Crystal Plates , 1952 .
[34] R. D. Mindlin,et al. Influence of rotary inertia and shear on flexural motions of isotropic, elastic plates , 1951 .