Effect of the inter-car gap length on the aerodynamic characteristics of a high-speed train

In wind tunnel experiments, the inter-car gaps are designed in such a way as to separate the force measurements for each car and prevent the interference between cars during tests. Moreover, the inter-car gap has a significant effect on the aerodynamic drag of a train. In order to guide the design of the inter-car gaps between cars in wind tunnel experiments, the impact of the inter-car gap length on the aerodynamic characteristics of a 1/8th scale high-speed train is investigated using computational fluid dynamics. The shear stress transport k-ω model is used to simulate the flow around a high-speed train. The aerodynamic characteristics of the train with 10 different inter-car gap lengths are numerically simulated and compared. The 10 different inter-car gap lengths are 5, 8, 10, 15, 20, 30, 40, 50, 60, and 80 mm. Results indicate that the aerodynamic drag coefficients obtained using computational fluid dynamics fit the experimental data well. Rapid pressure variations appear in the upper and lower parts of the inter-car gaps. With the increase of the inter-car gap length, the drag force coefficient of the head car gradually increases. The total drag force coefficients of the trains with the inter-car gap length less than 10 mm are practically equal to those of the trains without inter-car gaps. Therefore, it can be concluded from the present study that 10 mm is recommended as the inter-car gap length for the 1/8th scale high-speed train models in wind tunnel experiments.

[1]  Hyeok-bin Kwon,et al.  Wind tunnel experiments on Korean high-speed trains using various ground simulation techniques , 2001 .

[2]  Mikael Sima,et al.  Full-scale measurement and analysis of train slipstreams and wakes. Part 1: Ensemble averages , 2014 .

[3]  Christopher Baker,et al.  A review of train aerodynamics Part 2 – Applications , 2014, The Aeronautical Journal (1968).

[4]  Richard W. Johnson,et al.  Application of CFD to Rail Car and Locomotive Aerodynamics , 2009 .

[5]  Jelena Svorcan,et al.  Numerical investigation on the aerodynamic characteristics of high-speed train under turbulent crosswind , 2014 .

[6]  E. Willemsen,et al.  High Reynolds number wind tunnel experiments on trains , 1997 .

[7]  Mohammad Ali Rezvani,et al.  Numerical calculations of aerodynamic performance for ATM train at crosswind conditions , 2014 .

[8]  Hassan Hemida,et al.  Large eddy simulation of the flow around a train passing a stationary freight wagon , 2014 .

[9]  Jeffrey W. Saunders,et al.  Aerodynamic drag reduction of goods trains , 1992 .

[10]  Guangjun Gao,et al.  Impact of ground and wheel boundary conditions on numerical simulation of the high-speed train aerodynamic performance , 2016 .

[11]  Sinisa Krajnovic,et al.  Exploring Flow Structures Around a Simplified ICE2 Train Subjected to A 30° Side Wind Using LES , 2009 .

[12]  Christopher Baker,et al.  On the effect of crosswinds on the slipstream of a freight train and associated effects , 2016 .

[13]  Mohammad Mehdi Rashidi,et al.  Comparisons of Shear Stress Transport and Detached Eddy Simulations of the Flow Around Trains , 2018, Journal of Fluids Engineering.

[14]  Sigfried Loose,et al.  Particle image velocimetry of the underfloor flow for generic high-speed train models in a water towing tank , 2014 .

[15]  Ben Diedrichs,et al.  AERODYNAMIC CALCULATIONS OF CROSSWIND STABILITY OF A HIGH-SPEED TRAIN USING CONTROL VOLUMES OF ARBITRARY POLYHEDRAL SHAPE , 2008 .

[16]  Alexander Orellano,et al.  VALIDATION OF CFD FOR THE FLOW UNDER A TRAIN WITH 1 : 7 SCALE WIND TUNNEL MEASUREMENTS , 2008 .

[17]  William Powrie,et al.  A full-scale experimental and modelling study of ballast flight under high-speed trains , 2010 .

[18]  Frank Thiele,et al.  Numerical simulation of a regional train in cross-wind , 2015 .