Design and advanced manufacturing of aircraft structures using friction stir welding

Trabalho para Lideres para Industrias Tecnologicas do MIT-Portugal Program, sob a orientacao dos co-orientadores Thomas W. Eagar, Marco Pacchione, Jorge F. dos Santos e Pedro Vilaca

[1]  Thierry Pardessus Airbus.  CONCURRENT ENGINEERING DEVELOPMENT AND PRACTICES FOR AIRCRAFT DESIGN AT AIRBUS , 2004 .

[2]  Gregory S. Parnell,et al.  Quality function deployment and decision analysis :A R&D case study , 2000 .

[3]  Geilson Loureiro,et al.  A systems and concurrent engineering framework for the integrated development of space products , 2003 .

[4]  Robert Shishko,et al.  NASA technology assessment using real options valuation , 2004, Syst. Eng..

[5]  Ryan Gove.  Determining System Interoperability using an Integration Readiness Level , 2006 .

[6]  A. Vlot,et al.  Glare: History of the Development of a New Aircraft Material , 2001 .

[7]  R. M. V. G. K. Rao,et al.  Characterization of Mechanical Behavior of Metallic and Non-metallic Particulate Filled Epoxy Matrix Composites , 2010 .

[8]  Fredrik Hacklin,et al.  Design, product development, innovation: all the same in the end? A short discussion on terminology , 2005 .

[9]  Robert Rosen,et al.  The NASA technology push towards future space mission systems , 1989 .

[10]  Markus Kaufmann,et al.  Manufacturing process adaptation for integrated cost/weight optimisation of aircraft structures , 2009 .

[11]  Roderick K. Stanley,et al.  Nondestructive Evaluation: A Tool in Design, Manufacturing and Service , 2018 .

[12]  E. A. Starke,et al.  Progress in structural materials for aerospace systems , 2003 .

[13]  Robert Carter,et al.  Gimballed Shoulders for Friction Stir Welding , 2008 .

[14]  Dr. Rajkumar Roy,et al.  Capturing Quantitative & Qualitative Knowledge for Cost Modelling within a CE environment , 2001 .

[15]  Timothy Warner,et al.  Engineering for the future: weight saving and cost reduction initiatives , 2001 .

[16]  Brian Rooks.  Automatic wing box assembly developments , 2001 .

[17]  J Munroe,et al.  Integral Airframe Structures (IAS)---Validated Feasibility Study of Integrally Stiffened Metallic Fuselage Panels for Reducing Manufacturing Costs , 2000 .

[18]  Ian A. Ashcroft,et al.  Adhesive bonding of fibre reinforced polymer composite materials , 2000 .

[19]  Livan Fratini,et al.  Friction Stir Welding of AA6082-T6 T-joints: Process Engineering and Performance Measurement , 2006 .

[20]  Thomas W. Eagar,et al.  Welding processes for aeronautics , 2001 .

[21]  Stephen W. Tsai,et al.  Prediction of fatigue S–N curves of composite laminates by Super Mic–Mac , 2005 .

[22]  Michelle Kirby,et al.  Forecasting Technology Uncertainty in Preliminary Aircraft Design , 1999 .

[23]  Mohan M Ratwani.  Repair Types, Procedures - Part 1 , 2010 .

[24]  Sara Eastwood,et al.  Automated aerostructure assembly , 2005, Ind. Robot.

[25]  M. J. L. van Tooren,et al.  Integration of friction stir welding into a multi-disciplinary aerospace design framework , 2006 .

[26]  Mats Ericsson,et al.  Fatigue properties of friction stir overlap welds , 2007 .

[27]  P. C. Paris,et al.  A Critical Analysis of Crack Propagation Laws , 1963 .

[28]  René Alderliesten,et al.  Fatigue crack growth prediction in GLARE hybrid laminates , 2003 .

[29]  Richard Y. K. Fung,et al.  A new approach to quality function deployment planning with financial consideration , 2002, Comput. Oper. Res..

[30]  Blaine Lilly,et al.  Mechanical Assemblies: their Design, Manufacture, and Role in Product Development , 2013 .

[31]  Robert Carter,et al.  Friction Stir Welding Development at NASA-Marshall Space Flight Center , 2001 .

[32]  Nigel Cross,et al.  Engineering Design Methods: Strategies for Product Design , 1994 .

[33]  Bohdan W. Oppenheim.  Lean Enablers for Systems Engineering , 2009 .

[34]  Trent A Greenwell.  Design of Repair of Battle-Damaged Fixed-Wing Aircraft , 2010 .

[35]  C. Dalle Donne,et al.  Friction Stir Welding of T-Joints , 2003 .

[36]  R Martinez-Val,et al.  Aeronautics and astronautics: Recent progress and future trends , 2009 .

[37]  Ilan Kroo,et al.  Innovations in Aeronautics , 2004 .

[38]  Arthur C. Nunes.  Counterrotating-Shoulder Mechanism for Friction Stir Welding , 2007 .

[39]  Ian A. Waitz,et al.  The historical fuel efficiency characteristics of regional aircraft from technological, operational, and cost perspectives , 2002 .

[40]  P. Radhakrishnan,et al.  An integrated approach to design for manufacturing and assembly based on reduction of product development time and cost , 2009 .

[41]  T. Warner.  Recently-Developed Aluminium Solutions for Aerospace Applications , 2006 .

[42]  John R. Dixon,et al.  A review of research in mechanical engineering design. Part I: Descriptive, prescriptive, and computer-based models of design processes , 1989 .

[43]  Andreas Schäfer,et al.  Historical and future trends in aircraft performance, cost, and emissions , 2001 .

[44]  Filippo de Florio.  Airworthiness : an introduction to aircraft certification : a guide to understanding JAA, EASA, and FAA standards , 2006 .

[45]  John C. Mankins,et al.  Technology Readiness Levels-A White Paper , 1995 .

[46]  J. Homan,et al.  Fatigue initiation in fibre metal laminates , 2006 .

[47]  M. Aliabadi,et al.  Crack Growth Simulation in Integrally Stiffened Structures Including Residual Stress Effects from Manufacturing. Part I: Model Overview , 2011 .

[48]  H. Rösner,et al.  Airbus Airframe – New Technologies and Management Aspects , 2006 .

[49]  T H Lin,et al.  Fatigue crack nucleation in metals. , 1969, Proceedings of the National Academy of Sciences of the United States of America.

[50]  Jouni Similä,et al.  Industrial Management & Data Systems Managerial view on design for manufacturing , 2017 .

[51]  M. Kanninen,et al.  A finite element calculation of stress intensity factors by a modified crack closure integral , 1977 .

[52]  Sérgio M. O. Tavares,et al.  Mechanical behaviour of AA 2024 friction stir overlap welds , 2013 .

[53]  Daniel J. Davis.  NASA Ares I Crew Launch Vehicle Upper Stage Overview , 2008 .

[54]  Anthony P. Reynolds,et al.  Factors affecting the properties of friction stir welded aluminum lap joints , 2001 .

[55]  K. Walker.  The Effect of Stress Ratio During Crack Propagation and Fatigue for 2024-T3 and 7075-T6 Aluminum , 1970 .

[56]  Kimon P. Valavanis,et al.  Current Manned Aviation Regulation , 2012 .

[57]  A. Higgins.  Adhesive bonding of aircraft structures , 2000 .

[58]  Susan Carlson Skalak.  House of Quality , 2002 .

[59]  Andrew Smith,et al.  Automated Riveting Cell for A320 Wing Panels with Improved Throughput and Reliability (SA2) , 2007 .

[60]  J. Defalco,et al.  Friction stir welding vs. fusion welding , 2006 .

[61]  Robert W. Messler,et al.  Joining of Materials and Structures: From Pragmatic Process to Enabling Technology , 2004 .

[62]  C. Sorensen,et al.  Friction Stir Welding of Steel T-joint Configurations , 2005 .

[63]  Z. Ahmad.  The properties and application of scandium-reinforced aluminum , 2003 .

[64]  Anil Khurana,et al.  Quality function deployment: total quality management for new product design , 1995 .

[65]  Richard G. Pettit,et al.  Validated Feasibility Study of Integrally Stiffened Metallic Fuselage Panels for Reducing Manufacturing Costs , 2000 .

[66]  W. F. Ranson,et al.  Applications of digital-image-correlation techniques to experimental mechanics , 1985 .

[67]  Alan N Bramley,et al.  Advances in Integrated Design and Manufacturing in Mechanical Engineering , 2006 .

[68]  Dimitri N. Mavris,et al.  Effects of Alternative Wing Structural Concepts on High Speed Civil transport Life Cycle Costs , 1996 .

[69]  Dinesh Verma,et al.  From TRL to SRL : The Concept of Systems Readiness Levels , 2006 .

[70]  I. Raju,et al.  Evaluation of Stress-Intensity Factors Using General Finite-Element Models , 1999 .

[71]  Dimitri N. Mavris,et al.  Technology Impact Forecasting for a High Speed Civil Transport , 1998 .

[72]  H. Bhadeshia,et al.  Recent advances in friction-stir welding : Process, weldment structure and properties , 2008 .

[73]  Tom Swift,et al.  Fail-Safe Design Requirements and Features, Regulatory Requirements , 2003 .

[74]  E. Rogers,et al.  Diffusion of innovations , 1964, Encyclopedia of Sport Management.

[75]  Ilan Kroo,et al.  Aircraft Design: Synthesis and Analysis , 1999 .

[77]  S F Burch,et al.  Measurement of density variations in tablets using X-ray computed tomography. , 2004, International journal of pharmaceutics.

[78]  James M. Utterback,et al.  Mastering the Dynamics of Innovation , 1996 .

[79]  Jaap Schijve,et al.  Fatigue of structures and materials , 2001 .

[80]  Brian Christensen,et al.  Virtual collaborative simulation environment for integrated product and process development , 1996, Proceedings of 5th IEEE International Symposium on High Performance Distributed Computing.

[81]  Brian J. Sauser,et al.  A probabilistic approach to system maturity assessment , 2011, Syst. Eng..

[82]  Shanben Chen,et al.  The investigation of typical welding defects for 5456 aluminum alloy friction stir welds , 2006 .

[83]  Richard Curran,et al.  Review of Aerospace Engineering Cost Modelling: The Genetic Causal Approach , 2004 .

[84]  René Alderliesten,et al.  Fatigue and damage tolerance issues of GLARE in aircraft structures , 2006 .

[85]  R.J.H. Wanhill,et al.  Milestone Case Histories in Aircraft Structural Integrity , 2022, Reference Module in Materials Science and Materials Engineering.

[86]  A. Squillace,et al.  5690 - MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF AL 6056 FRICTION STIR WELDED JOINTS , 2013 .

[87]  Rinze Benedictus,et al.  Fiber/Metal composite technology for future primary aircraft structures , 2007 .

[88]  P. Moreira,et al.  Friction stir welding of T-joints with dissimilar aluminium alloys: Mechanical joint characterisation , 2010 .

[89]  Edwin R. Otto.  Innovation: The Attacker's Advantage , 1986 .

[90]  Antonio Augusto Monaco da Silva,et al.  Dissimilar Al to Mg Alloy Friction Stir Welds , 2006 .

[91]  Eric Rebentisch,et al.  Challenges in the Better, Faster, Cheaper Era of Aeronautical Design, Engineering and Manufacturing , 2000 .

[92]  Z. Chen,et al.  Friction stir welding : from basics to applications , 2010 .

[93]  Pedro Miguel Moreira,et al.  12.3 – Friction Stir Welding of T-joints Fabricated with Three Parts , 2008 .

[94]  Dimitri N. Mavris,et al.  The IATA Technology Roadmap Report, 3rd Edition , 2009 .

[95]  John W. Robinson,et al.  The Need for Technology Maturity of Any Advanced Capability to Achieve Better Life Cycle Cost (LCC) , 2009 .

[96]  D. Fabrègue,et al.  Multiscale Analysis of the Strength and Ductility of AA 6056 Aluminum Friction Stir Welds , 2007 .

[97]  Constantinos Soutis.  Carbon fiber reinforced plastics in aircraft construction , 2005 .

[98]  R. Steel,et al.  In situ thermal studies and post-weld mechanical properties of friction stir welds in age hardenable aluminium alloys , 2003 .

[99]  Brian J. Sauser,et al.  Integration maturity metrics: Development of an integration readiness level , 2010, Inf. Knowl. Syst. Manag..

[100]  Michel J. L. van Tooren,et al.  Incorporating Cost Analysis in a Multi Disciplinary Design Environment for Aircraft Movables , 2006, ISPE CE.

[101]  Cheryl T. Druehl,et al.  When Is a Disruptive Innovation Disruptive , 2008 .

[102]  Edward M. Petrie,et al.  Adhesives for the assembly of aircraft structures and components , 2008 .

[103]  Barrie Dale,et al.  New product design and development: a generic model , 1999 .

[104]  Yin Hailiana,et al.  Integration of Manufacturing Cost into Structural Optimization of Composite Wings , 2011 .

[105]  Young Gon Kim,et al.  Three defect types in friction stir welding of aluminum die casting alloy , 2006 .

[106]  J. Defalco,et al.  Friction Stir Process Now Welds Steel Pipe , 2009 .

[107]  Paolo Ermanni,et al.  Associative parametric CAE methods in the aircraft pre-design ? ? This article was presented at the , 2005 .

[108]  T.H.G. Megson,et al.  Aircraft structures for engineering students , 1972 .

[109]  Guo Q. Huang,et al.  Design for X : concurrent engineering imperatives , 1996 .

[110]  H. Fujii,et al.  Friction stir welding of Inconel alloy 600 , 2006 .

[111]  M. V. Tooren,et al.  Design case study for a comparative performance analysis of aerospace materials , 2006 .

[112]  C. Giummarra,et al.  NEW ALUMINUM LITHIUM ALLOYS FOR AEROSPACE APPLICATIONS , 2007 .

[113]  Dimitri N. Mavris,et al.  Technology Identification, Evaluation, and Selection for Commercial Transport Aircraft , 1999 .

[114]  Paul A. Colegrove,et al.  Experimental and numerical analysis of aluminium alloy 7075-T7351 friction stir welds , 2003 .

[115]  Mark A. Hopkins,et al.  Structures technology for future aerospace systems , 1998 .

[116]  R. Citarella,et al.  Advanced Design Concepts and Maintenance by Integrated Risk Evaluation for Aerostructures , 2006 .

[117]  C. C. Tseng,et al.  Prioritization of product design tasks using QFD, TRIZ and DSM , 2010, 2010 IEEE 17Th International Conference on Industrial Engineering and Engineering Management.

[118]  L. B. Vogelesang,et al.  Towards application of fibre metal laminates in large aircraft , 1999 .

[119]  D. Broek.  The practical use of fracture mechanics , 1988 .

[120]  J. Røyset,et al.  Scandium in aluminium alloys , 2005 .

[121]  Michael E. Raynor,et al.  The Innovator's Solution: Creating and Sustaining Successful Growth , 2003 .

[122]  Norman A. de Bruyne.  Joint design for primary structures , 1962 .

[123]  J. A. Lee,et al.  Aluminum-Scandium Alloys: Material Characterization, Friction Stir Welding, and Compatibility With Hydrogen Peroxide (MSFC Center Director's Discretionary Fund Final Report, Proj. No. 04-14) , 2004 .

[124]  Amrita Kumar,et al.  Design of Integrated SHM System for Commercial Aircraft Applications , 2005 .

[125]  R. Forman,et al.  Numerical Analysis of Crack Propagation in Cyclic-Loaded Structures , 1967 .

[126]  L. Yorks,et al.  Beyond Total Quality Management: Toward The Emerging Paradigm , 1994 .

[127]  James W Bilbro,et al.  A Suite of Tools for Technology Assessment , 2007 .

[128]  W. Shin,et al.  Quality Function Deployment: A Practitioner's Approach , 1993 .

[129]  E. A. Starke.  24 – Application of modern aluminium alloys to aircraft , 2011 .

[130]  Fan Yuqing,et al.  Application of Topology Optimization and Manufacturing Simulations - A new trend in design of Aircraft components , 2008 .

[131]  Richard Curran,et al.  Integrating Aircraft Cost Modeling into Conceptual Design , 2005, Concurr. Eng. Res. Appl..

[132]  Xinqi Yang,et al.  Effect of Root Flaws on the Fatigue Property of Friction Stir Welds in 2024-T3 Aluminum Alloys , 2006 .

[133]  Pedro P. Camanho,et al.  Simulation of delamination in composites under high-cycle fatigue , 2007 .

[134]  A. A. Zadpoor,et al.  Mechanical properties and microstructure of friction stir welded tailor-made blanks , 2008 .

[135]  Jane Hupe.  CAEP/8 : delivering substantial proposals to help minimize aviation's effects on the environment , 2010 .

[136]  R. Alderliesten,et al.  Fiber Metal Laminates, Fatigue of , 2001 .

[137]  R. M. Leal,et al.  Defects Formation in Friction Stir Welding of Aluminium Alloys , 2004 .

[138]  Amir A. Zadpoor,et al.  Tailor made blanks for the aerospace industry , 2010 .

[139]  Ronald Krueger,et al.  The Virtual Crack Closure Technique : History , Approach and Applications , 2002 .

[140]  R. Mishraa,et al.  Friction Stir Welding And Processing , 2005 .

[141]  Neil J. Goldfine,et al.  Noncontact Torque Sensing for Performance Monitoring and Fault Detection , 2009 .

[142]  A. Gerlich,et al.  Local melting and cracking in Al 7075-T6 and Al 2024-T3 friction stir spot welds , 2007 .

[143]  Fassi Kafyeke,et al.  Challenges of Aircraft Design Integration , 2003 .

[144]  Don Gunther,et al.  Quality Function Deployment - How to Make QFD Work for You , 2000 .

[145]  Jens Hinrichsen,et al.  The challenge of reducing both airframe weight and manufacturing cost , 2001 .

[146]  Olivier L. de Weck,et al.  Assessing risks and opportunities of technology infusion in system design , 2007, Syst. Eng..

[147]  Neil J. Goldfine,et al.  Friction Stir Weld Inspection Through Conductivity Imaging Using Shaped Field MWM(TM)-Arrays , 2002 .