Development of analytical and numerical models for predicting the mechanical properties of structural adhesives under curing using the PZT-based wave propagation technique

Abstract Structural adhesives are commonly used as bonding agents in fibre-reinforced polymer based strengthening systems for concrete structures. The effectiveness and integrity of the bonding layer can be ascertained by monitoring the stiffness and strength development of the structural adhesive throughout the curing process. Previous studies have shown that the piezoelectric-based wave propagation (WP) technique is a viable technology for such monitoring. While there is a limited number of experimental data that verifies the technology, there are no known modelling studies. This paper therefore reports the first analytical and numerical modelling study for the WP technique in monitoring the curing process of structural adhesives. An experimental program is also reported to support the modelling. Tests are firstly conducted with the WP technique to obtain the pressure wave (P-wave) velocity. Tensile tests are then conducted to determine the ultimate tensile strength and static modulus of elasticity of the structural adhesives. Based on the P-wave velocity, the dynamic modulus of elasticity can be evaluated analytically from the elastic wave equation as well as numerically through model updating with the development of a three-dimensional coupled field finite element model. Finally, semi-analytical and semi-numerical relationships are established to predict the ultimate tensile strength of the structural adhesives from the P-wave velocity. This proof-of-concept study shows that the WP technique is capable of continuous and real-time monitoring of the curing process of structural adhesives. With the aid of the models, the WP technique can potentially eliminate the need to conduct destructive tensile tests.

[1]  Matteo Ciccotti,et al.  Differences between static and dynamic elastic moduli of a typical seismogenic rock , 2004 .

[2]  Ricardo Perera,et al.  Interfacial crack-induced debonding identification in FRP-strengthened RC beams from PZT signatures using hierarchical clustering analysis , 2016 .

[3]  Chee Kiong Soh,et al.  A novel electromechanical impedance–based model for strength development monitoring of cementitious materials , 2018 .

[4]  Hongping Zhu,et al.  Monitoring of the strength gain of concrete using embedded PZT impedance transducer , 2011 .

[5]  Gangbing Song,et al.  A Comparative Study of the Very Early Age Cement Hydration Monitoring Using Compressive and Shear Mode Smart Aggregates , 2017, IEEE Sensors Journal.

[6]  R. Perera,et al.  A multi-objective electromechanical impedance technique to identify debonding in RC beams flexural strengthened with FRP , 2017 .

[7]  Scott T Smith,et al.  Piezoelectric-based monitoring of the curing of structural adhesives: a novel experimental study , 2018, Smart Materials and Structures.

[8]  Chee Kiong Soh,et al.  Practical issues related to the application of the electromechanical impedance technique in the structural health monitoring of civil structures: II. Numerical verification , 2008 .

[9]  J. Soderkvist.  Using FEA to treat piezoelectric low-frequency resonators , 1998, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[10]  Chee Kiong Soh,et al.  Fatigue life estimation of a 1D aluminum beam under mode-I loading using the electromechanical impedance technique , 2011 .

[11]  Raymond G. Boeman,et al.  Strain rate effects on the mechanical properties of polymer composite materials , 2004 .

[12]  John E. Bolander,et al.  Monitoring the hardening process of ultra high performance concrete using decomposed modes of guided waves , 2018 .

[13]  Hoon Sohn,et al.  Locating fatigue damage using temporal signal features of nonlinear Lamb waves , 2015 .

[14]  A. M. Lindrose.  Ultrasonic wave and moduli changes in a curing epoxy resin , 1978 .

[15]  Samir Mustapha,et al.  Leaky and non-leaky behaviours of guided waves in CF/EP sandwich structures , 2014 .

[16]  Wieslaw Ostachowicz,et al.  Nondestructive analysis of core-junction and joint-debond effects in advanced composite structure , 2019, Polymer Testing.

[17]  Shirsendu Sikdar,et al.  Ultrasonic Lamb wave‐based debonding monitoring of advanced honeycomb sandwich composite structures , 2018, Strain.

[18]  F. Chang,et al.  Identifying Delamination in Composite Beams Using Built-In Piezoelectrics , 1995 .

[19]  Guoliang Huang,et al.  On the study of surface wave propagation in concrete structures using a piezoelectric actuator/sensor system , 2008 .

[20]  Victor Giurgiutiu,et al.  Finite Element Simulation of Piezoelectric Wafer Active Sensors Based Structural Health Monitoring , 2007 .

[21]  Jeong-Beom Ihn,et al.  Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: II. Validation using riveted joints and repair patches , 2004 .

[22]  Moulin,et al.  Modeling of lamb waves generated by integrated transducers in composite plates using a coupled finite element-normal modes expansion method , 2000, The Journal of the Acoustical Society of America.

[23]  Michael A. Sutton,et al.  Predictive modeling of electromechanical impedance spectroscopy for composite materials , 2012 .

[24]  Wieslaw Ostachowicz,et al.  The use of electromechanical impedance conductance signatures for detection of weak adhesive bonds of carbon fibre–reinforced polymer , 2015 .

[25]  Chee Kiong Soh,et al.  Electro-Mechanical Impedance (EMI)-Based Incipient Crack Monitoring and Critical Crack Identification of Beam Structures , 2014 .

[26]  Chee Kiong Soh,et al.  Practical issues related to the application of piezoelectric based wave propagation technique in monitoring of concrete curing , 2017 .

[27]  W. Ostachowicz,et al.  Study of electromechanical impedance changes caused by modifications of CFRP adhesive bonds , 2017 .

[28]  Craig A. Rogers,et al.  Coupled Electro-Mechanical Analysis of Adaptive Material Systems — Determination of the Actuator Power Consumption and System Energy Transfer , 1994 .

[29]  Samir Mustapha,et al.  Bonding Piezoelectric Wafers for Application in Structural Health Monitoring–Adhesive Selection , 2015 .

[30]  Fu-Kuo Chang,et al.  Analytical model of lap-joint adhesive with embedded piezoelectric transducer for weak bond detection , 2017 .

[31]  R. Pethrick,et al.  Dielectric non-destructive testing approach to cure monitoring of adhesives and composites , 2007 .

[32]  Zongjin Li,et al.  Monitoring of cement hydration using embedded piezoelectric transducers , 2008 .

[33]  Victor Giurgiutiu,et al.  Predictive modeling of piezoelectric wafer active sensors interaction with high-frequency structural waves and vibration , 2012 .

[34]  Chun H. Wang,et al.  Higher harmonic generation of guided waves at delaminations in laminated composite beams , 2017 .

[35]  Kevin C. Craig,et al.  Incorporating finite element techniques to simplify the impedance modeling of active structures , 1998, Smart Structures.

[36]  Chee Kiong Soh,et al.  Parametric study and modeling of PZT based wave propagation technique related to practical issues in monitoring of concrete curing , 2018, Construction and Building Materials.

[37]  Fu-Kuo Chang,et al.  Damage detection and diagnosis of composites using built-in piezoceramics , 1993, Smart Structures.

[38]  F. Chang,et al.  Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: I. Diagnostics , 2004 .

[39]  Scott T Smith,et al.  Wave propagation based monitoring of concrete curing using piezoelectric materials: Review and path forward , 2018, NDT & E International.

[40]  Sumit Gupta,et al.  Noninvasive Monitoring of Epoxy Curing , 2017, IEEE Sensors Letters.

[41]  Fu-Kuo Chang,et al.  Identifying Delamination in Composite Beams Using Built-In Piezoelectrics: Part I—Experiments and Analysis , 1995 .

[42]  Chee Kiong Soh,et al.  Investigating the performance of “Smart Probe” based indirect EMI technique for strength development monitoring of cementitious materials : modelling and parametric study , 2018 .

[43]  Michael Sinapius,et al.  A Novel Approach to Monitoring the Curing of Epoxy in Closed Tools by Use of Ultrasonic Spectroscopy , 2018, Sensors.

[44]  K. A. Lakshmanan,et al.  Modeling damage in rotorcraft flexbeams using wave mechanics , 1997 .

[45]  C. Ng,et al.  Rayleigh wave propagation and scattering characteristics at debondings in fibre-reinforced polymer-retrofitted concrete structures , 2019 .

[46]  L. Rose,et al.  Analytical and finite element prediction of Lamb wave scattering at delaminations in quasi-isotropic composite laminates , 2012 .

[47]  Victor Giurgiutiu,et al.  Piezoelectric Wafer Embedded Active Sensors for Aging Aircraft Structural Health Monitoring , 2002 .

[48]  V. Giurgiutiu.  Tuned Lamb Wave Excitation and Detection with Piezoelectric Wafer Active Sensors for Structural Health Monitoring , 2005 .

[49]  Sauvik Banerjee,et al.  Identification of disbond and high density core region in a honeycomb composite sandwich structure using ultrasonic guided waves , 2016 .

[50]  Chee Kiong Soh,et al.  Towards more accurate numerical modeling of impedance based high frequency harmonic vibration , 2014 .

[51]  H. Sohn,et al.  Second harmonic generation at fatigue cracks by low-frequency Lamb waves: experimental and numerical studies , 2018 .

[52]  Gangbing Song,et al.  Very early age concrete hydration characterization monitoring using piezoceramic based smart aggregates , 2013 .

[53]  Chee Kiong Soh,et al.  Non-destructive concrete strength evaluation using smart piezoelectric transducer—a comparative study , 2016 .

[54]  Gang Wu,et al.  Bond-slip models for CFRP plates externally bonded to steel substrates , 2018 .