Effect of Precious-Metal Dopants on SOFC Anodes for Direct Utilization of Hydrocarbons

The effect on cell performance of adding dopant levels of precious metals (PM: Pt, Rh, or Pd) into solid oxide fuel cell (SOFC) anodes based on carbon, ceria, and yttria-stabilized zirconia (YSZ) was examined. The PM-doped anodes remained stable in dry CH 4 and n-butane over a period of at least 24 h. While maximum power densities for H 2 and n-butane increased by almost a factor of two upon addition of PM, the maximum power density for CH 4 increased by a factor of almost 10 over that measured on a Cu-ceria-YSZ anode, to 280 mW/cm 2 at 973 K. The open-circuit voltages (OCVs) were also measured for CH 4 and n-hutane as a function of H 2 O and CO 2 concentrations. The addition of PM dopants led to a significant increase in the OCV for CH 4 and n-butane, although the OCV remained lower than the theoretical Nernst potentials. The differences between the theoretical and measured OCV are attributed to barriers to surface reaction, which in turn can be decreased through improved catalytic properties.

[1]  J. Vohs,et al.  Impedance Spectroscopy for the Characterization of Cu-Ceria-YSZ Anodes for SOFCs , 2003 .

[2]  W. L. Worrell,et al.  A Comparison of Cu-Ceria-SDC and Au-Ceria-SDC Composites for SOFC Anodes , 2003 .

[3]  Shen-ming Chen,et al.  Iron Hexacyanoruthenate Films and Their Electrocatalytic Properties with Nitrite and Dopamine , 2003 .

[4]  R. Mark Ormerod.  Solid oxide fuel cells. , 2003, Chemical Society reviews.

[5]  J. Vohs,et al.  Role of Hydrocarbon Deposits in the Enhanced Performance of Direct-Oxidation SOFCs , 2003 .

[6]  W. L. Worrell,et al.  SOFCs for Direct Oxidation of Hydrocarbon Fuels with Samaria-Doped Ceria Electrolyte , 2003 .

[7]  J. Vohs,et al.  Synthesis of Highly Porous Yttria‐Stabilized Zirconia by Tape‐Casting Methods , 2003 .

[8]  Scott A. Barnett,et al.  Operation of anode-supported solid oxide fuel cells on methane and natural gas , 2003 .

[9]  J. Vohs,et al.  An Examination of Lanthanide Additives on the Performance of Cu-YSZ Cermet Anodes , 2002 .

[10]  Kevin Kendall,et al.  Effects of dilution on methane entering an SOFC anode , 2002 .

[11]  Paolo Fornasiero,et al.  Catalysis by Ceria and Related Materials , 2002 .

[12]  John T. S. Irvine,et al.  Improved Oxidation of Hydrocarbons with New Electrodes in High Temperature Fuel Cells , 2001 .

[13]  Raymond J. Gorte,et al.  Tape Cast Solid-Oxide Fuel Cells for the Direct Oxidation of Hydrocarbons , 2001 .

[14]  R. Gorte,et al.  Steam reforming of n-butane on Pd/ceria , 2001 .

[15]  Raymond J. Gorte,et al.  Anodes for Direct Oxidation of Dry Hydrocarbons in a Solid‐Oxide Fuel Cell , 2000 .

[16]  Raymond J. Gorte,et al.  Direct oxidation of hydrocarbons in a solid-oxide fuel cell , 2000, Nature.

[17]  Mogens Bjerg Mogensen,et al.  High-temperature conversion of methane on a composite gadolinia-doped ceria–gold electrode , 1999 .

[18]  Seungdoo Park,et al.  Direct Oxidation of Hydrocarbons in a Solid Oxide Fuel Cell: I. Methane Oxidation , 1999 .

[19]  R. Gorte,et al.  Kinetic studies of methane steam reforming on ceria-supported Pd , 1998 .

[20]  Raymond J. Gorte,et al.  Ceria-Based Anodes for the Direct Oxidation of Methane in Solid Oxide Fuel Cells , 1995 .

[21]  N. Minh.  Ceramic Fuel Cells , 1993 .

[22]  E. Garbowski,et al.  FUNDAMENTALS AND APPLICATIONS OF CERIA IN COMBUSTION REACTIONS , 2002 .