Measurements and CFD simulations of gas holdup and liquid velocity in novel airlift membrane contactor

Liquid velocity and gas holdup were measured in a 690L pilot-scale rectangular airlift contactor, divided into aerated and nonaerated sections by two vertical rectangular polyester textile membranes. Horizontal flow through the porous membranes complicates flow fields to such an extent that conventional models cannot predict thoroughly velocity profile in the contactor. Experimental data obtained from laser doppler velocimetry (LDV) method were compared with numerical finite volume method (FVM), in order to determine the velocity profile in the downcomer zone of the contactor. In formulating the data, a realistic set of boundary conditions was implemented in the numerical method, resulted in satisfactory agreement between theory and experiment. The effects of the distance between the rectangular membranes and air bubble size on the velocity profile were also studied. © 2006 American Institute of Chemical Engineers AIChE J, 2006

[1]  Yatish T. Shah,et al.  Hydrodynamics and mass transfer in non‐Newtonian solutions in a bubble column , 1984 .

[2]  M. Kaviany.  Principles of heat transfer in porous media , 1991 .

[3]  Argyrios Margaritis,et al.  Production of Ethanol Using Immobilised Cell Bioreactor Systems , 2005 .

[4]  J. Markoš,et al.  Scale influence on the hydrodynamics of an internal loop airlift reactor , 2004 .

[5]  S. A. Mohsen Karimian,et al.  Discretization and parallel performance of an unstructured finite volume Navier–Stokes solver , 2006 .

[6]  Shaoqing Wang,et al.  Gas holdup, liquid circulating velocity and mass transfer properties in a mini-scale external loop airlift bubble column , 2003 .

[7]  D. J. Pollard,et al.  Gas holdup and liquid circulation rate in concentric-tube airlift bioreactors , 1994 .

[8]  E.Garcia Calvo,et al.  Prediction of gas hold up and liquid velocity in airlift loop reactors containing highly viscous Newtonian liquids , 1991 .

[9]  P. Bajpai,et al.  Studies on the flocculation characteristics of Kluyveromyces marxianus. , 1986, Biotechnology and bioengineering.

[10]  A. Margaritis,et al.  The application of ore immobilization to the bioleaching of refractory gold concentrate , 2001 .

[11]  Channing R. Robertson,et al.  The immobilization of whole cells: Engineering principles , 1985 .

[12]  Milan Polakovič,et al.  Periodical changes of input air flowrate : a possible way of improvement of oxygen transfer and liquid circulation in airlift bioreactors , 1999 .

[13]  Jorge M. T. Vasconcelos,et al.  Effect of contaminants on mass transfer coefficients in bubble column and airlift contactors , 2003 .

[14]  C. Chavarie,et al.  Soil immobilization: new concept for biotreatment of soil contaminants. , 1998, Biotechnology and bioengineering.

[15]  A. Margaritis,et al.  Hydrodynamic and Mass Transfer Characteristics of Three-Phase Gaslift Bioreactor Systems , 2001, Critical reviews in biotechnology.

[16]  Mao Guozhu,et al.  Nitrifying treatment of wastewater from fertilizer production in a multiple airlift loop bioreactor , 2005 .

[17]  M. Moo-Young,et al.  Liquid circulation in airlift reactors , 1988 .

[18]  A. Margaritis,et al.  Effect of temperature and pH on immobilized Zymomonas mobilis for continuous production of ethanol , 1986, Biotechnology and bioengineering.

[19]  M. Tien,et al.  Oxidation of persistent environmental pollutants by a white rot fungus. , 1985, Science.

[20]  J. Smagorinsky,et al.  GENERAL CIRCULATION EXPERIMENTS WITH THE PRIMITIVE EQUATIONS , 1963 .