The structure and physical properties of polypropylene and thermoplastic olefin nanocomposites containing nanosilica

[1]  E. Pavlidou,et al.  Preparation by melt mixing and characterization of isotactic polypropylene/SiO2 nanocomposites containing untreated and surface-treated nanoparticles , 2006 .

[2]  Azman Hassan,et al.  Rubber‐toughened polypropylene nanocomposite: Effect of polyethylene octene copolymer on mechanical properties and phase morphology , 2006 .

[3]  A. Bandyopadhyay,et al.  Preparation and characterization of nanocomposites based on thermoplastic elastomers from rubber–plastic blends , 2006 .

[4]  Donald R Paul,et al.  TPO based nanocomposites. Part 1. Morphology and mechanical properties , 2005 .

[5]  J. Seppälä,et al.  Compatibilization of PP/elastomer/microsilica composites with functionalized polyolefins: Effect on microstructure and mechanical properties , 2005 .

[6]  E. Pavlidou,et al.  Compatibilisation effect of PP-g-MA copolymer on iPP/SiO2 nanocomposites prepared by melt mixing , 2005 .

[7]  J. K. Mishra,et al.  Preparation, mechanical and rheological properties of a thermoplastic polyolefin (TPO)/organoclay nanocomposite with reference to the effect of maleic anhydride modified polypropylene as a compatibilizer , 2005 .

[8]  M. Bousmina,et al.  Role of organically modified layered silicate as an active interfacial modifier in immiscible polystyrene/polypropylene blends , 2004 .

[9]  L. Goettler,et al.  Structure‐property relationships in polymer blend nanocomposites , 2004 .

[10]  F. Mirabella,et al.  Thermoplastic olefin/clay nanocomposites: Morphology and mechanical properties , 2004 .

[11]  B. B. Khatua,et al.  Effect of Organoclay Platelets on Morphology of Nylon-6 and Poly(ethylene-ran-propylene) Rubber Blends , 2004 .

[12]  Yiqun Liu,et al.  The Relationship between Microstructure and Properties in PP/Rubber Powder/nano-CaCO3 Ternary Blends , 2004 .

[13]  Q. Fu,et al.  Kinetics-controlled compatibilization of immiscible polypropylene/polystyrene blends using nano-SiO2 particles , 2004 .

[14]  J. Qian,et al.  Nonisothermal crystallization of PP/Nano-SiO2 composites , 2004 .

[15]  Klaus Friedrich,et al.  Tensile performance improvement of low nanoparticles filled-polypropylene composites , 2002 .

[16]  P. McShane,et al.  Rheology, phase morphology, mechanical, impact and thermal properties of polypropylene/metallocene catalysed ethylene 1-octene copolymer blends , 2002 .

[17]  Th. C. Yu.  Mentallocane plastomer modification of polypropylenes , 2001 .

[18]  K. Friedrich,et al.  Structure–property relationships of irradiation grafted nano-inorganic particle filled polypropylene composites , 2001 .

[19]  K. Premphet,et al.  Phase structure and property relationships in ternary polypropylene/elastomer/filler composites: Effect of elastomer polarity , 2000 .

[20]  F. Bates,et al.  Semicrystalline blends of polyethylene and isotactic polypropylene: Improving mechanical performance by enhancing the interfacial structure , 2000 .

[21]  R. J. Gaymans,et al.  Polypropylene–rubber blends: 5. Deformation mechanism during fracture , 1999 .

[22]  R. J. Gaymans,et al.  Polypropylene–rubber blends: 2. The effect of the rubber content on the deformation and impact behaviour , 1999 .

[23]  R. J. Gaymans,et al.  Polypropylene–rubber blends: 1. The effect of the matrix properties on the impact behaviour , 1998 .

[24]  R. Shanks,et al.  PP/elastomer/filler hybrids. II. Morphologies and fracture , 1996 .

[25]  R. Shanks,et al.  PP–elastomer–filler hybrids. I. Processing, microstructure, and mechanical properties , 1996 .

[26]  A. Dibenedetto,et al.  Effect of morphology on the behaviour of ternary composites of polypropylene with inorganic fillers and elastomer inclusions , 1995, Journal of Materials Science.

[27]  A. Hiltner,et al.  The ductile‐to‐quasi‐brittle transition of particulate‐filled thermoplastic polyester , 1994 .

[28]  V. Choudhary,et al.  Polyolefin blends: effect of EPDM rubber on crystallization, morphology and mechanical properties of polypropylene/EPDM blends. 1 , 1991 .

[29]  R. J. Gaymans,et al.  Impact behaviour of nylon-rubber blends: 6. Influence of structure on voiding processes; toughening mechanism , 1989 .

[30]  Souheng Wu.  A generalized criterion for rubber toughening: The critical matrix ligament thickness , 1988 .

[31]  E. Martuscelli,et al.  Mechanical properties and morphology of isotactic polypropylene/ethylene-propylene copolymer blends , 1987 .

[32]  Saad A. Khan,et al.  Melt Rheology of Filled Thermoplastics , 1987 .

[33]  Souheng Wu.  Phase structure and adhesion in polymer blends: a criterion for rubber toughening , 1985 .

[34]  J. Karger‐Kocsis,et al.  Phase structure of impact-modified polypropylene blends , 1984 .