A dynamic programming methodology to develop de-icing strategies during ice storms by channeling load currents in transmission networks

The ice storm of 1998 in northeastern North America caused much damage to the electrical installations of Trans-E/spl acute/nergie, the transmission provider in Que/spl acute/bec. Consequently, staff there and at Hydro-Que/spl acute/bec's research centre IREQ have deployed substantial efforts to mitigate the effects of future ice storms. This paper describes one of many projects dedicated to that goal. A computer program has been developed to simulate the ice buildup (also called accretion) on wires of electrical transmission lines and the melting of this ice using the heat generated by the currents flowing in the wires, under evolving network and weather conditions. Using these simulation tools, scenarios presenting different network configurations can be tested and the best sequence of scenarios, called a de-icing strategy, can be applied to reduce the ice buildup over the network. The methodology proposed here to determine de-icing strategies, based on dynamic programming, constitutes an optimal control to minimize ice buildup on the network over the set of scenarios and over the time horizon spanning the anticipated duration of the ice storm. A prototype of this computation has been tested using network data from the TranE/spl acute/nergie network and weather data from the 1998 ice storm. Once completed, the program will serve as an aide to operators during ice storms and as a training tool to better prepare for such eventualities.

[1]  H. B. Smith,et al.  Sleet-melting practices: Niagara Mohawk system , 1953, Electrical Engineering.

[2]  H. R. Tomlinson,et al.  Sleet-Thawing Practices of the New England Electric System [includes discussion] , 1952, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[3]  V. L. Davies,et al.  Ice-Melting and Prevention Practices on Transmission Lines [includes discussion] , 1952, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[4]  Murray W. Davis,et al.  Nomographic Computation of the Ampacity Rating of Aerial Conductors , 1970 .

[5]  M. Huneault,et al.  Combined models for glaze ice accretion and de-icing of current-carrying electrical conductors , 2005, IEEE Transactions on Power Delivery.

[6]  A. N. Shealy,et al.  Forty-Two Years' Experience Combating Sleet Accumulations [includes discussion] , 1952, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[7]  Pascal Personne,et al.  Ice Accretion on Wires and Anti-Icing Induced by Joule Effect , 1988 .

[8]  G. Poots.  Ice and snow accretion on structures , 1996 .

[9]  Jean Laflamme,et al.  State-of-the-art on power line de-icing , 1998 .

[10]  S. C. Bartlett,et al.  Sleet Melting on the American Gas and Electric System [includes discussion] , 1952, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[11]  Kathleen F. Jones.  Ice Accretion in Freezing Rain. , 1996 .

[12]  Lasse Makkonen,et al.  Modeling of Ice Accretion on Wires , 1984 .

[13]  Lasse Makkonen,et al.  Modeling power line icing in freezing precipitation , 1998 .

[14]  C. F. DeSieno,et al.  Sleet Melting on 330-Kv Lines of American Gas and Electric Company and Ohio Valley Electric Corporation Systems [includes discussion] , 1956, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.