Simulating fuel consumption and vehicle emissions in an Australian context

Road transport is a major source of air pollution and greenhouse gas emissions around the world. There is an increasing interest in accurate information on local vehicle emission levels for policy development and sustainable traffic management. Previous studies have shown that emission predictions for the Australian situation need to reflect both the Australian fleet and driving behaviour to avoid unreliable outcomes. This paper discusses a new Australian vehicle emission software (P ΔP) and a case-study where traffic simulation software (Aimsun) is combined with PΔP to demonstrate how consistent results can be achieved for the Australian situation. The case-study is an Australian city modelled using the microscopic simulator to generate the required trajectory data of each individual vehicle for the emission model. The simulation results are used in a number of ways: to assess the impacts of urban driving behaviour on fuel consumption, to create maps showing where and when elevated emission levels occur and to compare results with another program (COPERT Australia). The paper will also discuss where further research is required.

[1]  Sophie Midenet,et al.  SIGNALIZED INTERSECTION WITH REAL-TIME ADAPTIVE CONTROL: ON-FIELD ASSESSMENT OF CO2 AND POLLUTANT EMISSION REDUCTION , 2004 .

[2]  Leonidas Ntziachristos,et al.  COPERT Australia: Developing Improved Average Speed Vehicle Emission Algorithms for the Australian Fleet , 2012 .

[3]  Dsewpc National Environment Protection (Ambient Air Quality) Measure , 2007 .

[4]  Robert B. Noland,et al.  Flow improvements and vehicle emissions: effects of trip generation and emission control technology , 2006 .

[5]  H. Oliver Gao,et al.  The MOVES from MOBILE: Preliminary Comparisons of EPA’s Current and Future Mobile Emissions Models , 2007 .

[6]  Robin Smit Development and performance of a new vehicle emissions and fuel consumption software (PΔP) with a high resolution in time and space , 2013 .

[7]  Robin Smit,et al.  Improved road traffic emission inventories by adding mean speed distributions , 2008 .

[8]  Hesham Rakha,et al.  Development of VT-Micro model for estimating hot stabilized light duty vehicle and truck emissions , 2004 .

[9]  H. Christopher Frey,et al.  Evaluation of numerical models for simulation of real-world hot-stabilized fuel consumption and emissions of gasoline light-duty vehicles , 2006 .

[10]  Matthew Barth,et al.  Development of a Comprehensive Modal Emissions Model , 2000 .

[11]  Martin Weilenmann,et al.  Towards accurate instantaneous emission models , 2005 .

[12]  L. Ntziachristos,et al.  Validation of road vehicle and traffic emission models – A review and meta-analysis , 2010 .

[13]  Michael Claggett,et al.  Carbon monoxide near an urban intersection , 1981 .