Dispersion and thermal conductivity of carbon nanotube composites

Abstract A mechanical method was used to shorten carbon nanotubes (CNTs) for improving dispersion without reducing their thermal conductivity. Single walled carbon nanotubes (SWCNTs) were mechanically cut to produce short and open-ended fullerene pipes. These shortened SWCNTs were then used in polymer composites. Both atomic force microscopy and scanning electron microscopy characterizations suggested that nanotube shortening significantly improved CNT dispersion. Thermal conductivity of composites containing short CNTs were found to be much better than those containing pristine CNTs.

[1]  J. Fiala,et al.  Cylindrical diameters method for calibrating section thickness in serial electron microscopy , 2001, Journal of microscopy.

[2]  Chuck Zhang,et al.  Precise cutting of single-walled carbon nanotubes , 2007 .

[3]  Deron A. Walters,et al.  Elastic strain of freely suspended single-wall carbon nanotube ropes , 1999 .

[4]  Masako Yudasaka,et al.  Structure of single-wall carbon nanotubes purified and cut using polymer , 2002 .

[5]  P. Bernier,et al.  Segmented and opened multi-walled carbon nanotubes , 2001 .

[6]  P. Bernier,et al.  Nano-mechanical cutting and opening of single wall carbon nanotubes , 2000 .

[7]  L. Nagahara,et al.  Self-orientation of short single-walled carbon nanotubes deposited on graphite , 2001 .

[8]  Otto Zhou,et al.  Fabrication and Properties of Composites of Poly(ethylene oxide) and Functionalized Carbon Nanotubes , 2002 .

[9]  Kirk J. Ziegler,et al.  Cutting single-walled carbon nanotubes , 2005, Nanotechnology.

[10]  A. Rinzler,et al.  Length sorting cut single wall carbon nanotubes by high performance liquid chromatography , 2002 .

[11]  M. Yudasaka,et al.  Effect of an organic polymer in purification and cutting of single-wall carbon nanotubes , 2000 .

[12]  P. Flory.  Statistical Thermodynamics of Mixtures of Rodlike Particles. 5. Mixtures with Random Coils , 1978 .

[13]  Roger H. French,et al.  Lithographically Cut Single-Walled Carbon Nanotubes: Controlling Length Distribution and Introducing End-Group Functionality , 2003 .

[14]  Riichiro Saito,et al.  Electronic structure of chiral graphene tubules , 1992 .

[15]  P. Flory.  Statistical Thermodynamics of Mixtures of Rodlike Particles. 6. Rods Connected by Flexible Joints , 1978 .

[16]  T. Ebbesen,et al.  Exceptionally high Young's modulus observed for individual carbon nanotubes , 1996, Nature.

[17]  R. Smalley,et al.  Cutting Single-Wall Carbon Nanotubes through Fluorination , 2002 .

[18]  J. Murthy,et al.  Effect of percolation on thermal transport in nanotube composites , 2007 .

[19]  Charles M. Lieber,et al.  Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes , 1997 .

[20]  T. D. Yuzvinsky,et al.  Erratum: “Precision cutting of nanotubes with a low-energy electron beam” [Appl. Phys. Lett. 86, 053109 (2005)] , 2005 .

[21]  Jijun Zhao,et al.  Effects of sidewall functionalization on conducting properties of single wall carbon nanotubes. , 2006, Nano letters.

[22]  Eklund,et al.  Solution properties of single-walled carbon nanotubes , 1998, Science.

[23]  William Mickelson,et al.  Precision cutting of nanotubes with a low-energy electron beam , 2005 .

[24]  M. J. Dyer,et al.  Cyclodextrin-mediated soft cutting of single-walled carbon nanotubes. , 2001, Journal of the American Chemical Society.