Literature survey of permanent magnet AC motors and drives

The authors survey the literature on permanent magnet (PM) motors and drives and include line-start as well as inverter-fed applications and designs. The literature on inverter-fed applications and designs is divided into two parts: studies that deal with drives that use discrete feedback every 60 degrees (electrical) for a three-phase machine, and studies that deal with drives that use continuous feedback. In the former, the ideal machine back EMF is trapezoidal; in the latter, it is sinusoidal. The literature on brushless DC motors is also surveyed.<<ETX>>

[1]  Pragasen Pillay,et al.  Modeling of permanent magnet motor drives , 1988 .

[2]  Nady Boules,et al.  FIELD ANALYSIS FOR A HIGH-POWER, HIGH-SPEED PERMANENT MAGNET SYNCHRONOUS MACHINE OF THE DISC CONSTRUCTION TYPE , 1980 .

[3]  J. De La Ree,et al.  Permanent magnet machines torque considerations , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[4]  Eike Richter.  POWER DENSITY CONSIDERATIONS FOR PERMANENT MAGNET MACHINES , 1979 .

[5]  Teck-Seng Low,et al.  Characteristics and Performance Analysis of a Permanent-Magnet Motor with a Multistacked Imbricated Rotor , 1987, IEEE Power Engineering Review.

[6]  Gu Qishan,et al.  Air Gap Field for Pm Electric Machines , 1985 .

[7]  J. J. Cathey,et al.  Determination of permanent magnet synchronous motor parameters for use in brushless DC motor drive analysis , 1988 .

[8]  Toyoji Himei,et al.  Estimation of torque pulsation due to the behaviour of a convertor and an inverter in a brushless DC-drive system , 1985 .

[9]  Vlado Ostovic,et al.  Computation of Saturated Permanent-Magnet AC Motor Performance by Means of Magnetic Circuits , 1987, IEEE Transactions on Industry Applications.

[10]  T. Miller.  Synchronization of Line-Start Permanent-Magnet AC Motors , 1984, IEEE Transactions on Power Apparatus and Systems.

[11]  Nabeel A. O. Demerdash,et al.  Computer-aided modeling and experimental verification of the performance of power conditioner operated permanent magnet brushless DC motors including rotor damping effects , 1988 .

[12]  Charles P. Neuman,et al.  Pulsewidth Modulation Control of Brushless DC Motors for Robotic Applications , 1985, IEEE Transactions on Industrial Electronics.

[13]  Timothy J. E. Miller,et al.  The Ferrite Permanent Magnet AC Motor---A Technical and Economical Assessment , 1985, IEEE Transactions on Industry Applications.

[14]  Kenichi Iizuka,et al.  Microcomputer Control for Sensorless Brushless Motor , 1985, IEEE Transactions on Industry Applications.

[15]  T. Sebastian,et al.  Transient modeling and performance of variable-speed permanent-magnet motors , 1989 .

[16]  T. Sebastian,et al.  Transient torque and short circuit capabilities of variable speed permanent magnet motors , 1987 .

[17]  A. Ishizaki,et al.  Asynchronous Performance Prediction of AC Permanent Magnet Motor , 1986, IEEE Transactions on Energy Conversion.

[18]  Gu Qishan,et al.  Effect of Slotting in Pm Electric Machines , 1985 .

[19]  Pragasen Pillay,et al.  Modeling, simulation, and analysis of permanent-magnet motor drives. II. The brushless DC motor drive , 1989 .

[20]  Thomas M. Jahns,et al.  Flux-Weakening Regime Operation of an Interior Permanent-Magnet Synchronous Motor Drive , 1987, IEEE Transactions on Industry Applications.

[21]  R.H. Miller,et al.  Comparison Between Features and Performance Characteristics of Fifteen HP Samarium Cobalt and Ferrite Based Brushless DC Motors Operated by Same Power Conditioner , 1983, IEEE Transactions on Power Apparatus and Systems.

[22]  M. A. Jabbar,et al.  High-field self-starting permanent-magnet synchronous motor , 1981 .

[23]  B. Adkins,et al.  The permanent-magnet synchronous motor , 1962 .

[24]  E. Levi,et al.  Iron saturation effects in PM AC motors , 1985 .

[25]  Pragasen Pillay,et al.  Control characteristics and speed controller design for a high performance permanent magnet synchronous motor drive , 1990 .

[26]  M. A. Rahman,et al.  Promising applications of neodymium boron Iron magnets in electrical machines , 1985 .

[27]  N. Matsui,et al.  DSP-based adaptive control of a brushless motor , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[28]  V. Honsinger,et al.  Performance of Polyphase Permanent Magnet Machines , 1980, IEEE Transactions on Power Apparatus and Systems.

[29]  A. G. Jack,et al.  Power circuits for small permanent-magnet brushless DC drives , 1988 .

[30]  S. Morimoto,et al.  Generalised analysis for steady-state characteristics of DC commutatorless motors , 1983 .

[31]  M.A. Rahman,et al.  Permanent magnet motors for brushless operation , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[32]  Michel Lajoie-Mazenc,et al.  Study and Implementation of Hysteresis Controlled Inverter on a Permanent Magnet Synchronous Machine , 1985, IEEE Transactions on Industry Applications.

[33]  Hiroshi Takami,et al.  Low-Speed Drive of PWM-VSI-Fed Brushless Self-Excited Synchronous Motor , 1986, IEEE Transactions on Industry Applications.

[34]  Boon-Teck Ooi,et al.  OPTIMAL WINDING DESIGN OF A PERMANENT MAGNET MOTOR FOR SELF-CONTROLLED INVERTER OPERATION , 1981 .

[35]  Rene Spee,et al.  The effects of motor parameters on the performance of brushless DC drives , 1987, IEEE Power Electronics Specialists Conference.

[36]  P. Pillay,et al.  Application characteristics of permanent magnet synchronous and brushless DC motors for servo drives , 1991 .

[37]  Nabeel A. O. Demerdash,et al.  Impact of the addition of a rotor-mounted damper bar cage on the performance of samarium-cobalt permanent magnet brushless DC motor systems , 1988 .

[38]  Alfio Consoli,et al.  Transient Performance of Permanent Magnet AC Motor Drives , 1986, IEEE Transactions on Industry Applications.

[39]  M. A. Rahman,et al.  Dynamic Performance Analysis of Permanent Magnet Synchronous Motors , 1984, IEEE Power Engineering Review.

[40]  O. Wasynczuk,et al.  Analysis of a Permanent Magnet Synchronous Machine Supplied from a 180?? Inverter with Phase Control , 1987, IEEE Power Engineering Review.

[41]  T.A. Lipo,et al.  Power capability of salient pole permanent magnet synchronous motors in variable speed drive applications , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[42]  R.S. Colby.  Classification of inverter driven permanent magnet synchronous motors , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[43]  A. Levran,et al.  Design of polyphase motors with PM excitation , 1984 .

[44]  D. Tipping,et al.  Torque availability from small synchronous motors using high coercivity magnets , 1985 .

[45]  N.A Demerdash,et al.  Dynamic Modeling of Brushless dc Motors for Aerospace Actuation , 1980, IEEE Transactions on Aerospace and Electronic Systems.

[46]  Mehrdad Ehsani,et al.  High-speed torque control of brushless permanent magnet motors , 1988 .

[47]  H. R. Bolton,et al.  Investigation into a class of brushless DC motor with quasisquare voltages and currents , 1986 .

[48]  G. W. McLean.  Brushless d.c. drives using claw-type stator and disc rotor , 1979 .

[49]  A. Kusko,et al.  Definition of the brushless DC motor , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[50]  Pragasen Pillay,et al.  Modeling Of Permanent Magnet Motor Drives , 1987, Other Conferences.

[51]  Alan K. Wallace,et al.  Performance characteristics of brushless DC drives , 1988 .

[52]  D. Pavlik,et al.  A finite element technique for calculating the magnet sizes and inductances of permanent magnet machines , 1988 .

[53]  Bimal K. Bose.  A high-performance inverter-fed drive system of an interior permanent magnet synchronous machine , 1987 .

[54]  J. De La Ree,et al.  Torque production in permanent-magnet synchronous motors , 1989 .

[55]  Gordon R. Slemon.  Analytical Models for Saturated Synchronous Machines , 1971 .

[56]  Thomas W. Nehl,et al.  Dynamic Simulation of Radially Oriented Permanent Magnet-Type Electronically Operated Synchronous Machines with Parameters Obtained from Finite Element Field Solutions , 1982, IEEE Transactions on Industry Applications.

[57]  H. F. Mildrum.  Hard permanent magnet development trends and their application to A.C. machines , 1981 .

[58]  G. D. Baines,et al.  Parameters and performance of a high-field permanent-magnet synchronous motor for variable-frequency operation , 1985 .

[59]  P. Pillay,et al.  Development of digital models for a vector controlled permanent magnet synchronous motor drive , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[60]  Mohammad Ali Choudhury,et al.  RUN-UP RESPONSE OF POLYPHASE PERMANENT MAGNET SYNCHRONOUS MOTORS , 1984 .

[61]  Hoang Le-Huy,et al.  Minimization of Torque Ripple in Brushless DC Motor Drives , 1986, IEEE Transactions on Industry Applications.

[62]  Syed M. Peeran,et al.  Brushless DC Motors Using Unsymmetrical Field Magnetization , 1987, IEEE Transactions on Industry Applications.

[63]  Bernard Davat,et al.  Modeling of a Brushless DC Motor with Solid Parts Involving Eddy Currents , 1985, IEEE Transactions on Industry Applications.

[64]  E.G. Strangas,et al.  Combining field and circuit equations for the analysis of permanent magnet AC motor drives , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[65]  Thomas A. Lipo,et al.  Field Weakening in Buried Permanent Magnet AC Motor Drives , 1985, IEEE Transactions on Industry Applications.

[66]  V. Honsinger.  Permanent Magnet Machines: Asychronous Operation , 1980, IEEE Transactions on Power Apparatus and Systems.

[67]  A. F. Wick,et al.  Design and Experimental Results of a Brushless AC Servo Drive , 1984, IEEE Transactions on Industry Applications.

[68]  Gordon R. Slemon,et al.  Operating Limits of Inverter-Driven Permanent Magnet Motor Drives , 1987, IEEE Transactions on Industry Applications.

[69]  Yoshihiro Kawase,et al.  Torque ripple improvement for brushless DC miniature motors , 1989 .

[70]  K. J. Binns,et al.  Analysis and performance of a high-field permanent-magnet synchronous machine , 1984 .

[71]  Sakutaro Nonaka,et al.  A New Brushless Half-Speed Synchronous Motor with Q-Axis Squirrel-Cage Damper Winding Driven by Voltage Source Inverter , 1987, IEEE Transactions on Industry Applications.

[72]  P. Pillay,et al.  An investigation into the torque behavior of a brushless DC motor drive , 1988, Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting.

[73]  G. Slemon,et al.  Modelling of permanent magnet synchronous motors , 1986 .

[74]  P. Pillay,et al.  Parameter Sensitivity In Vector Controlled Ac Motor Drives , 1987, Other Conferences.

[75]  Gu Qishan,et al.  The Fringing Effect in PM Electric Machines , 1986 .

[76]  Nady Boules,et al.  MACHINE CONSTANTS AND DESIGN CONSIDERATIONS OF A HIGH-POWER, HIGH-SPEED PERMANENT MAGNET DISC TYPE SYNCHRONOUS MACHINE , 1980 .

[77]  Thomas M. Jahns,et al.  Interior Permanent-Magnet Synchronous Motors for Adjustable-Speed Drives , 1986, IEEE Transactions on Industry Applications.

[78]  Nabeel A. O. Demerdash,et al.  Digital simulation of power conditioner-machine interaction for electronically commutated DC permanent magnet machines , 1981 .

[79]  S. Williams.  Direct drive system for an industrial robot using a brushless DC motor , 1985 .

[80]  Philippe Viarouge,et al.  Design and Construction of a Brushless Permanent Magnet Servomotor for Direct-Drive Application , 1987, IEEE Transactions on Industry Applications.

[81]  Nady Boules.  Prediction of No-Load Flux Density Distribution in Permanent Magnet Machines , 1985, IEEE Transactions on Industry Applications.

[82]  M. A. Rahman,et al.  Analytical models for exterior-type permanent magnet synchronous motors , 1985 .

[83]  Alan K. Wallace,et al.  The effects of motor parameters on the performance of brushless DC drives , 1990 .

[84]  Paresh C. Sen,et al.  Brushless DC Motor Propulsion Using Synchronous Motors for Transit Systems , 1984, IEEE Transactions on Industrial Electronics.

[85]  A. A. Arkadan,et al.  Computation of winding inductances of permanent magnet brushless DC motors with damper windings by energy perturbation , 1988 .

[86]  Thomas M. Jahns.  Torque Production in Permanent-Magnet Synchronous Motor Drives with Rectangular Current Excitation , 1984, IEEE Transactions on Industry Applications.

[87]  Gordon R. Slemon,et al.  Steady-State Analysis of a Permanent Magnet Synchronous Motor Drive with Voltage-Source Inverter , 1981, IEEE Transactions on Industry Applications.

[88]  M. A. Jabbar,et al.  Hybrid permanent-magnet synchronous motors , 1978 .

[89]  Walter H. Sakmann.  A Brushless DC Motor Controlled by a Microprocessor with Examples for a Three-Phase Motor , 1987, IEEE Transactions on Industrial Electronics.