Resistive Control for a Photovoltaic Battery Charging System Using a Microcontroller

A new control algorithm has been developed, consisting of a buck-type dc/dc converter, which is used in a parallel-operated photovoltaic battery charging system. From the past research, it has been analyzed that the current loop that is generally used in the parallel operation of the power conditioner has an inherent stability problem in the large-signal domain in the photovoltaic system. The proposed algorithm directly transforms the effective input characteristic of the converter seen by the solar array into a resistive load, which is controlled by a microcontroller-based unit. Thus, the resulting system eliminates the instability associated with the current loop in the photovoltaic system. In addition, it is simple, flexible, and easily expandable. To analyze the effects of the one-sample delay caused by the digital controller, the emulated function in the case of average current mode control is modeled using small-signal approaches, and the design criteria are presented. The experimental results from 180-W prototype hardware show that the proposed algorithm has a simple implementation structure and can stabilize the system in the entire region of the solar array.

[1]  R.A. Dougal,et al.  A novel, digitally-controlled, portable photovoltaic power source , 2005, Twentieth Annual IEEE Applied Power Electronics Conference and Exposition, 2005. APEC 2005..

[2]  Robert W. Erickson,et al.  Power-source element and its properties , 1994 .

[3]  C. Q. Lee,et al.  Peak power tracking in parallel connected converters , 1992, [Proceedings] 1992 IEEE International Conference on Systems, Man, and Cybernetics.

[4]  Fred C. Lee,et al.  Small-signal modeling of average current-mode control , 1992, [Proceedings] APEC '92 Seventh Annual Applied Power Electronics Conference and Exposition.

[5]  Ken Nagasaka,et al.  A Novel Microcontroller for Grid-Connected Photovoltaic Systems , 2006, IEEE Transactions on Industrial Electronics.

[6]  Robert W. Erickson,et al.  Nonlinear-carrier control for high power factor boost rectifiers , 1995, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95.

[7]  Eugenio Faldella,et al.  Architectural and design issues on optimal management of photovoltaic pumping systems , 1991 .

[8]  F. C. Lee,et al.  Charge control: modeling, analysis and design , 1992 .

[9]  Hyunsu Bae,et al.  Design of Peak and Charge Current-mode Control for Parallel Module Solar Array Regulator System , 2006 .

[10]  K.I. Hwu,et al.  Improvement of Nonlinear-carrier Control for High-power-factor Boost Rectifiers , 2006, 2006 International Conference on Power System Technology.

[11]  Dragan Maksimovic,et al.  Modeling of high-power-factor rectifiers based on switching converters with nonlinear-carrier control , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[12]  C. Q. Lee,et al.  Maximum Power Trackin g in Parallel Connected Converters , 1993 .

[13]  Rong-Jong Wai,et al.  High-Performance Stand-Alone Photovoltaic Generation System , 2008, IEEE Transactions on Industrial Electronics.

[14]  R. B. Ridley,et al.  A new, continuous-time model for current-mode control (power convertors) , 1991 .

[15]  P. N. Paraskevopoulos,et al.  Modern Control Engineering , 2001 .

[16]  Chien-Hsuan Chang,et al.  A fuzzy-logic-controlled single-stage converter for PV-powered lighting system applications , 2000, IEEE Trans. Ind. Electron..

[17]  Joung-Hu Park,et al.  Dual-Module-Based Maximum Power Point Tracking Control of Photovoltaic Systems , 2006, IEEE Transactions on Industrial Electronics.

[18]  F. Lee,et al.  Large-signal stability analysis of spacecraft power processing systems , 1987, IEEE Power Electronics Specialists Conference.

[19]  Bo-Hyung Cho,et al.  Large Signal Stability Analysis of the Solar Array Power System Using the Controlled Load Characteristic , 2006 .

[20]  Jung-Min Kwon,et al.  Photovoltaic Power Conditioning System With Line Connection , 2006, IEEE Transactions on Industrial Electronics.

[21]  J.B. Klaassens,et al.  Battery charger design for the Columbus MTFF power system , 1997, IEEE Transactions on Aerospace and Electronic Systems.

[22]  Luis Martinez-Salamero,et al.  AC-LFR concept applied to modular photovoltaic power conversion chains , 2002 .

[23]  Raymond B. Ridley,et al.  A new small-signal model for current-mode control , 1990 .