Thermodynamic and experimental assessment of proton conducting solid oxide fuel cells with internal methane steam reforming

[1]  J. Lemmon,et al.  Intermediate-temperature solid oxide electrolysis cells with thin proton-conducting electrolyte and a robust air electrode , 2017 .

[2]  Qian Zhou,et al.  Direct operation of Ag-based anode solid oxide fuel cells on propane , 2017 .

[3]  Chusheng Chen,et al.  Performance and DRT analysis of P-SOFCs fabricated using new phase inversion combined tape casting technology , 2017 .

[4]  Shaomin Liu,et al.  Proton-Conducting La-Doped Ceria-Based Internal Reforming Layer for Direct Methane Solid Oxide Fuel Cells. , 2017, ACS applied materials & interfaces.

[5]  C. C. Wang,et al.  Performance and durability of a layered proton conducting solid oxide fuel cell fueled by the dry reforming of methane , 2017 .

[6]  S. Uhlenbruck,et al.  Durable direct ethanol anode-supported solid oxide fuel cell , 2017 .

[7]  Lei Bi,et al.  Proton-conducting solid oxide fuel cell (SOFC) with Y-doped BaZrO3 electrolyte , 2017 .

[8]  Zongping Shao,et al.  Co-generation of electricity and syngas on proton-conducting solid oxide fuel cell with a perovskite layer as a precursor of a highly efficient reforming catalyst , 2017 .

[9]  Qian Zhou,et al.  A direct carbon solid oxide fuel cell operated on a plant derived biofuel with natural catalyst , 2016 .

[10]  Partha Sarkar,et al.  Anode‐Engineered Protonic Ceramic Fuel Cell with Excellent Performance and Fuel Compatibility , 2016, Advanced materials.

[11]  Donglin Han,et al.  Transport properties of acceptor-doped barium zirconate by electromotive force measurements , 2016 .

[12]  Jian Li,et al.  Biomass carbon fueled tubular solid oxide fuel cells with molten antimony anode , 2016 .

[13]  Zongping Shao,et al.  Stable direct-methane solid oxide fuel cells with calcium-oxide-modified nickel-based anodes operating at reduced temperatures , 2016 .

[14]  Ali Almansoori,et al.  Readily processed protonic ceramic fuel cells with high performance at low temperatures , 2015, Science.

[15]  Olaf Deutschmann,et al.  Numerical analysis of mass and heat transport in proton-conducting SOFCs with direct internal reforming , 2015 .

[16]  Zongping Shao,et al.  Ethylene glycol as a new sustainable fuel for solid oxide fuel cells with conventional nickel-based anodes , 2015 .

[17]  E. Traversa,et al.  Y-doped BaZrO3 as a chemically stable electrolyte for proton-conducting solid oxide electrolysis cells (SOECs) , 2015 .

[18]  Zongping Shao,et al.  In situ catalyzed Boudouard reaction of coal char for solid oxide-based carbon fuel cells with improved performance , 2015 .

[19]  Jiang Liu,et al.  An Investigation on Dip-Coating Technique for Fabricating Anode-Supported Solid Oxide Fuel Cells , 2015 .

[20]  Matthew M. Montemore,et al.  Enhanced Dry Reforming of Methane on Ni and Ni-Pt Catalysts Synthesized by Atomic Layer Deposition , 2015 .

[21]  Meilin Liu,et al.  Deactivation of nickel-based anode in solid oxide fuel cells operated on carbon-containing fuels , 2014 .

[22]  Lei Bi,et al.  Steam electrolysis by solid oxide electrolysis cells (SOECs) with proton-conducting oxides. , 2014, Chemical Society reviews.

[23]  F. Chen,et al.  Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer , 2014 .

[24]  Jiang Liu,et al.  Ni-based anode-supported Al2O3-doped-Y2O3-stabilized ZrO2 thin electrolyte solid oxide fuel cells with Y2O3-stabilized ZrO2 buffer layer , 2014 .

[25]  Dong Ding,et al.  Enhancing SOFC cathode performance by surface modification through infiltration , 2014, Energy & Environmental Science.

[26]  Amornchai Arpornwichanop,et al.  Investigation of a proton-conducting SOFC with internal autothermal reforming of methane , 2013 .

[27]  Zongping Shao,et al.  Progress in solid oxide fuel cells with nickel-based anodes operating on methane and related fuels. , 2013, Chemical reviews.

[28]  Yeong Yoo,et al.  Performance and stability of proton conducting solid oxide fuel cells based on yttrium-doped barium cerate-zirconate thin-film electrolyte , 2013 .

[29]  Wei Liu,et al.  Fabrication and characterization of anode-supported dense BaZr0.8Y0.2O3 − δ electrolyte membranes by a dip-coating process , 2012 .

[30]  Lei Bi,et al.  Towards the Next Generation of Solid Oxide Fuel Cells Operating Below 600 °C with Chemically Stable Proton‐Conducting Electrolytes , 2012, Advanced materials.

[31]  Jiang Liu,et al.  (Ni0.75Fe0.25–xMgO)/YSZ anode for direct methane solid-oxide fuel cells , 2011 .

[32]  Emiliana Fabbri,et al.  Materials challenges toward proton-conducting oxide fuel cells: a critical review. , 2010, Chemical Society reviews.

[33]  Ryan O'Hayre,et al.  Cost-effective solid-state reactive sintering method for high conductivity proton conducting yttrium-doped barium zirconium ceramics , 2010 .

[34]  Zhe Cheng,et al.  Enhanced Sulfur and Coking Tolerance of a Mixed Ion Conductor for SOFCs: BaZr0.1Ce0.7Y0.2–xYbxO3–δ , 2009, Science.

[35]  Florence Lefebvre-Joud,et al.  Current status of proton-conducting solid oxide fuel cells development , 2009 .

[36]  D. Leung,et al.  Modeling of methane fed solid oxide fuel cells: Comparison between proton conducting electrolyte and oxygen ion conducting electrolyte , 2008 .

[37]  Jun Ni,et al.  Methane steam reforming for hydrogen production using low water-ratios without carbon formation over ceria coated Ni catalysts , 2008 .

[38]  Yaquan Wang,et al.  Thermodynamic analysis of autothermal steam and CO2 reforming of methane , 2008 .

[39]  Suttichai Assabumrungrat,et al.  Methane steam reforming over Ni/Ce-ZrO2 catalyst : Influences of Ce-ZrO2 support on reactivity, resistance toward carbon formation, and intrinsic reaction kinetics , 2005 .

[40]  S. Barnett,et al.  Direct operation of solid oxide fuel cells with methane fuel , 2005 .

[41]  Nguyen Q. Minh,et al.  Solid oxide fuel cell technology—features and applications , 2004 .

[42]  K. Sasaki,et al.  Equilibria in Fuel Cell Gases I. Equilibrium Compositions and Reforming Conditions , 2003 .

[43]  Ryuji Kikuchi,et al.  Study on steam reforming of CH4 and C2 hydrocarbons and carbon deposition on Ni-YSZ cermets , 2002 .

[44]  Hee Chun Lim,et al.  Carbon deposition and cell performance of Ni-YSZ anode support SOFC with methane fuel , 2002 .

[45]  Y. Yoo,et al.  Thermodynamic Analysis of Carbon Deposition and Electrochemical Oxidation of Methane for SOFC Anodes , 2001 .

[46]  Stefano Peratello,et al.  Experimental methods in catalytic kinetics , 1999 .

[47]  A. Virkar,et al.  Instability of BaCeO3 in H2O-containing atmospheres , 1996 .

[48]  Yunya Zhang,et al.  A High‐Performing Direct Carbon Fuel Cell with a 3D Architectured Anode Operated Below 600 °C , 2018, Advanced materials.

[49]  Amornchai Arpornwichanop,et al.  Analysis of a proton-conducting SOFC with direct internal reforming , 2010 .