Reduction of droplet volume by controlling actuating waveforms in inkjet printing for micro-pattern formation

Inkjet printing has proven to be a promising and flexible process methodology for low cost and drop-on-demand pattern formation in small-scale production of micro-electro-mechanical systems. To optimize the micro-patterns formed by inkjet printing, an accurate control of droplet volume is essential and critical. In this study, an inkjet system with a nozzle driven by a circular piezoelectric element was used to explore the impact of different waveforms on droplet volume. The investigation into this study included the impact of unipolar, bipolar, M-shaped and W-shaped waveforms as well as the effects of their amplitudes and pulse durations. The inkjetting behavior of Newtonian and non-Newtonian fluids under different actuating waveforms was studied in order to obtain a maximum reduction in ejected droplet sizes. An effective reduction of droplet volume in the range of 50-80% was demonstrated. The results of inkjetting PEDOT ink on a polished silicon surface showed that a 50% reduction in line width was achieved.

[1]  Melissa Orme,et al.  Enhanced Aluminum Properties by Means of Precise Droplet Deposition , 2000 .

[2]  Kwon-Yong Shin,et al.  Silver inkjet printing with control of surface energy and substrate temperature , 2008 .

[3]  Frank E. Talke,et al.  Experimental and theoretical study of wave propagation phenomena in drop-on-demand ink jet devices , 1984 .

[4]  Alvin U. Chen,et al.  A new method for significantly reducing drop radius without reducing nozzle radius in drop-on-demand drop production , 2002 .

[5]  William R. Salaneck,et al.  Conductivity, morphology, interfacial chemistry, and stability of poly(3,4‐ethylene dioxythiophene)–poly(styrene sulfonate): A photoelectron spectroscopy study , 2003 .

[6]  C. Pearson,et al.  An inkjet-printed chemical fuse , 2005 .

[7]  D. Lewis,et al.  Ink-jet fabrication of electronic components , 2007 .

[8]  M Schena,et al.  Microarrays: biotechnology's discovery platform for functional genomics. , 1998, Trends in biotechnology.

[9]  Osman A. Basaran,et al.  Small‐scale free surface flows with breakup: Drop formation and emerging applications , 2002 .

[10]  H. Sirringhaus,et al.  High-Resolution Ink-Jet Printing of All-Polymer Transistor Circuits , 2000, Science.

[11]  G. Harrison,et al.  The effect of added polymers on the formation of drops ejected from a nozzle , 2005 .

[12]  Zakya H. Kafafi,et al.  Molecular organic light-emitting diodes using highly conducting polymers as anodes , 2002 .

[13]  U. Schubert,et al.  Inkjet Printing of Polymers: State of the Art and Future Developments , 2004 .