Investigation of delayed formation of wax deposits in polyethylene pipe using a flow-loop

[1]  Hao Shi,et al.  Estimating wall sticking occurrence temperature based on adhesion force theory , 2020 .

[2]  Yunhai Ma,et al.  Biomimetic functional surface of reducing soil adhesion on 65Mn steel , 2019 .

[3]  C. Sarica,et al.  Influence of operating temperatures on long-duration wax deposition in flow lines , 2019 .

[4]  Rongbin Li,et al.  Effect of shear on the thickness of wax deposit under laminar flow regime , 2019, Journal of Petroleum Science and Engineering.

[5]  Abhijeet,et al.  Influence of textural statistics on drag reduction by scalable, randomly rough superhydrophobic surfaces in turbulent flow , 2019, Physics of Fluids.

[6]  K. Paso,et al.  Influence of Measuring Geometry on Rheomalaxis of Macrocrystalline Wax–Oil Gels: Alteration of Breakage Mechanism from Adhesive to Cohesive , 2019, Energy & Fuels.

[7]  Qiyu Huang,et al.  Estimating the wax breaking force and wax removal efficiency of cup pig using orthogonal cutting and slip-line field theory , 2019, Fuel.

[8]  Qiyu Huang,et al.  Relation of heat and mass transfer in wax diffusion in an emulsion of water and waxy crude oil under static condition , 2018, Experimental Thermal and Fluid Science.

[9]  H. S. Fogler,et al.  Mechanism of Wax Deposition on Cold Surfaces: Gelation and Deposit Aging , 2018, Energy & Fuels.

[10]  Qiyu Huang,et al.  A theoretical model for predicting the wax breaking force during pipeline pigging , 2018, Journal of Petroleum Science and Engineering.

[11]  Qiucheng Wang,et al.  Investigation of wax deposition and effective diffusion coefficient in water-in-oil emulsion system , 2018, Journal of Thermal Analysis and Calorimetry.

[12]  H. S. Fogler,et al.  A fundamental wax deposition model for water‐in‐oil dispersed flows in subsea pipelines , 2017 .

[13]  A. Bannwart,et al.  Rheological study under simple shear of six gelled waxy crude oils , 2017 .

[14]  C. Sarica,et al.  Effect of the Flow Field on the Wax Deposition and Performance of Wax Inhibitors: Cold Finger and Flow Loop Testing , 2017 .

[15]  H. S. Fogler,et al.  Entrapment of Water Droplets in Wax Deposits from Water-in-Oil Dispersion and Its Impact on Deposit Build-up , 2017 .

[16]  Wenling Yu,et al.  The wax deposition rate of water-in-crude oil emulsions based on the laboratory flow loop experiment , 2017 .

[17]  Jinjun Zhang,et al.  Effect of the amount and the composition of precipitated n-alkanes on the yield stress of wax-decane gels , 2016 .

[18]  C. Sarica,et al.  Investigation of inhibitors efficacy in wax deposition mitigation using a laboratory scale flow loop , 2016 .

[19]  Fei Yang,et al.  Development of Asphaltenes-Triggered Two-Layer Waxy Oil Gel Deposit under Laminar Flow: An Experimental Study , 2016 .

[20]  K. Fan,et al.  Determination of the optimizing operating procedure for DSC test of wax-solvent samples with narrow and sharp wax peak and error analysis of data reliability , 2016, Journal of Thermal Analysis and Calorimetry.

[21]  Lei Wang,et al.  Research on viscoelastic properties of water in waxy crude oil emulsion gels with the effect of droplet size and distribution , 2015 .

[22]  Fei Yang,et al.  Polymeric Wax Inhibitors and Pour Point Depressants for Waxy Crude Oils: A Critical Review , 2015 .

[23]  Huicong Liu,et al.  A conversion coating on carbon steel with good anti-wax performance in crude oil , 2013 .

[24]  H. S. Fogler,et al.  Effects of Operating Conditions on Wax Deposit Carbon Number Distribution: Theory and Experiment , 2013 .

[25]  Cem Sarica,et al.  Review of Paraffin Deposition Research under Multiphase Flow Conditions , 2012 .

[26]  H. S. Fogler,et al.  Counterintuitive effects of the oil flow rate on wax deposition , 2012 .

[27]  G. Tang.  Non-Newtonian flow in microporous structures under the electroviscous effect , 2011 .

[28]  Rainer Hoffmann,et al.  Single-Phase Wax Deposition Experiments , 2010 .

[29]  H. Rønningsen,et al.  Novel Surfaces with Applicability for Preventing Wax Deposition: A Review , 2009 .

[30]  J. Sjöblom,et al.  Characterization of the Formation, Flowability, and Resolution of Brazilian Crude Oil Emulsions , 2009 .

[31]  J. Scaiano,et al.  Polymeric Surfaces for Heavy Oil Pipelines To Inhibit Wax Deposition: PP, EVA28, and HDPE , 2006 .

[32]  N. V. Bhat,et al.  Modeling of Deposit Formation from "Waxy" Mixtures via Moving Boundary Formulation: Radial Heat Transfer under Static and Laminar Flow Conditions , 2005 .

[33]  Lijuan Wang,et al.  Wettability effect of coatings on drag reduction and paraffin deposition prevention in oil , 2002 .

[34]  E. Gad,et al.  LOW TEMPERATURE RHEOLOGICAL BEHAVIOR OF UMBARKA WAXY CRUDE AND INFLUENCE OF FLOW IMPROVER , 1997 .

[35]  R. Jorda.  Paraffin Deposition and Prevention in Oil Wells , 1966 .

[36]  F. Fowkes.  ATTRACTIVE FORCES AT INTERFACES , 1964 .

[37]  L. J. Bonis.  SURFACE ANALYSIS - "Interdisciplinary Aspects of Surface Phenomena" , 1964 .

[38]  A. B. Metzner,et al.  Flow of non‐newtonian fluids—correlation of the laminar, transition, and turbulent‐flow regions , 1955 .

[39]  M. Mooney.  Explicit Formulas for Slip and Fluidity , 1931 .

[40]  B. Rabinowitsch,et al.  Über die Viskosität und Elastizität von Solen , 1929 .

[41]  Qiyu Huang,et al.  Effect of operating conditions on wax deposition in a laboratory flow loop characterized with DSC technique , 2014, Journal of Thermal Analysis and Calorimetry.

[42]  Francisco Caleyo,et al.  Reliability assessment of buried pipelines based on different corrosion rate models , 2013 .

[43]  H. Jones.  The Surface Energy of Solid Metals , 1967 .