Three-dimensional simulation of the particle distribution in a downer using CFD–DEM and comparison with the results of ECT experiments

Abstract A three-dimensional numerical model of the down-flow fluidized bed (Downer) with a newly designed distributor was applied to investigate the particle distribution profiles using combined computational fluid dynamics (CFD) and the discrete element method (DEM). A realistic model of DEM, which calculates the contact force acting on the individual particles, is used to monitor the movement of individual particles in the bed. The contact force is calculated using the concepts of the spring, dash-pot, and friction slider. The flow field of gas is predicted by the Navier–Stokes equation. This CFD–DEM model provides information regarding the particle movement and distribution, the particle velocity, and the gas velocity in the bed under different air-particle mixture conditions. The results demonstrate that the air supply conditions directly influence the particle distribution uniformity. Furthermore, the numerical predictions for the axial and radial profiles of the particle distribution were found to agree well with the experimental results obtained by electrical capacitance tomography (ECT).

[1]  Y. Tsuji,et al.  Discrete particle simulation of two-dimensional fluidized bed , 1993 .

[2]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[3]  Tong Zhao,et al.  Discussion of the solids distribution behavior in a downer with new designed distributor based on concentration images obtained by electrical capacitance tomography , 2010 .

[4]  J. Kuipers,et al.  A numerical model of gas-fluidized beds , 1992 .

[5]  Aibing Yu,et al.  A CFD–DEM study of the cluster behavior in riser and downer reactors , 2008 .

[6]  S. Ergun.  Fluid flow through packed columns , 1952 .

[7]  Ng Niels Deen,et al.  Review of discrete particle modeling of fluidized beds , 2007 .

[8]  Yutaka Tsuji,et al.  Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe , 1992 .

[9]  Masao Sakamoto,et al.  Quasi-three-dimensional numerical simulation of spouted beds in cylinder , 2000 .

[10]  Yong Jin,et al.  Dispersion of lateral and axial solids in a cocurrent downflow circulating fluidized bed , 1994 .

[11]  Tong Zhao,et al.  Sensor design and image accuracy for application of capacitance CT to the petroleum refinery process , 2007 .

[13]  Jinghai Li,et al.  Multiscale analysis and modeling of multiphase chemical reactors , 2004 .

[14]  Aibing Yu,et al.  Particle-scale modelling of gas-solid flow in fluidisation † , 2003 .

[15]  Fei Wei,et al.  Solids mixing in a down-flow circulating fluidized bed of 0.418-m in diameter , 2006 .

[16]  Tong Zhao,et al.  ECT measurement and CFD–DEM simulation of particle distribution in a down-flow fluidized bed , 2010 .

[17]  Chih-Hung Hsu,et al.  Similarity Model for DEM Simulation of Fluidized Bed , 2007 .

[18]  C. Wen.  Mechanics of Fluidization , 1966 .

[19]  Lauren Briens,et al.  Flow dynamics in a four-inch downer using solids concentration measurements , 2007 .

[20]  Yong Jin,et al.  Hydrodynamics of cocurrent downflow circulating fluidized bed (CDCFB) , 1992 .