New epoxy thermosets modified with hyperbranched poly(ester-amide) of different molecular weight
暂无分享,去创建一个
[1] X. Ramis,et al. New improved thermosets obtained from DGEBA and a hyperbranched poly(ester-amide) , 2009 .
[2] J. M. Salla,et al. Study on the chemical modification of epoxy/anhydride thermosets using a hydroxyl terminated hyperbranched polymer , 2009 .
[3] J. M. Salla,et al. A new strategy for controlling shrinkage of DGEBA resins cured by cationic copolymerization with hydroxyl‐terminated hyperbranched polymers and ytterbium triflate as an initiator , 2009 .
[4] G. Cicala,et al. Studies on epoxy blends modified with a hyperbranched polyester , 2008 .
[5] Liyi Shi,et al. Morphology, toughness mechanism, and thermal properties of hyperbranched epoxy modified diglycidyl ether of bisphenol A (DGEBA) interpenetrating polymer networks , 2008 .
[6] L. Ye,et al. Simultaneous improvements in the cryogenic tensile strength, ductility and impact strength of epoxy resins by a hyperbranched polymer , 2008 .
[7] J. M. Salla,et al. New poly(ether‐ester) thermosets obtained by cationic curing of DGEBA and 7,7‐dimethyl‐6,8‐dioxaspiro[3.5] nonane‐5,9‐dione with several Lewis acids as initiators , 2008 .
[8] K. Fang,et al. Preparation and Characterization of Hyperbranched Polyesteramides , 2008 .
[9] J. M. Salla,et al. New thermosets obtained by cationic copolymerization of DGEBA with γ‐caprolactone with improvement in the shrinkage. II. Time–temperature–transformation (TTT) cure diagram , 2007 .
[10] J. Canadell,et al. SYNTHESIS OF A NOVEL BIS-SPIROORTHOESTER CONTAINING 9,10-DIHYDRO-9-OXA-10- PHOSPHAPHENANTRENE-10-OXIDE AS A SUBSTITUENT: HOMOPOLYMERIZATION AND COPOLYMERIZATION WITH DIGLYCIDYL ETHER OF BISPHENOL A , 2007 .
[11] Sabu Thomas,et al. Cure kinetics, morphology and miscibility of modified DGEBA-based epoxy resin – Effects of a liquid rubber inclusion , 2007 .
[12] D. Jia,et al. Toughness and strength improvement of diglycidyl ether of bisphenol-A by low viscosity liquid hyperbranched epoxy resin , 2006 .
[13] R. Bongiovanni,et al. Investigation on the effect of the presence of hyperbranched polymers on thermal and mechanical properties of an epoxy UV‐cured system , 2005 .
[14] G. Cicala,et al. Influence of hydroxyl functionalized hyperbranched polymers on the thermomechanical and morphological properties of epoxy resins , 2005 .
[15] R. Bongiovanni,et al. Phenolic Hyperbranched Polymers as Additives in Cationic Photopolymerization of Epoxy Systems , 2004 .
[16] C. Wong,et al. A reworkable epoxy resin for isotropically conductive adhesive , 2004, IEEE Transactions on Advanced Packaging.
[17] J. M. Salla,et al. Copolymerization of diglycidyl ether of bisphenol A with γ‐butyrolactone catalyzed by ytterbium triflate: Shrinkage during curing , 2003 .
[18] D. Ratna,et al. Toughening of trifunctional epoxy using an epoxy‐functionalized hyperbranched polymer , 2003 .
[19] V. Michaud,et al. Internal stress control in epoxy resins and their composites by material and process tailoring , 2002 .
[20] Mark D. Poliks,et al. Characterization of thermally reworkable thermosets: materials for environmentally friendly processing and reuse , 2002 .
[21] R. Mülhaupt,et al. Hyperbranched polyesters and their application in dental composites: monomers for low shrinking composites , 2001 .
[22] R. Day,et al. Toughened carbon/epoxy composites made by using core/shell particles , 2001 .
[23] J. Månson,et al. Dendritic hyperbranched polymers as tougheners for epoxy resins , 1999 .
[24] P. Sivasamy,et al. The role of β-hydrogen in the degradation of polyesters , 1992 .
[25] C. A. May,et al. Epoxy Resins: Chemistry and Technology , 1973 .