Mechatronic Design, Dynamics, Controls, and Metrology of a Long-Stroke Linear Nano-Positioner

[1]  Nathan Ida.  Engineering Electromagnetics , 2000 .

[2]  Xiaodong Lu,et al.  6D direct-drive technology for planar motion stages , 2012 .

[3]  No-Cheol Park,et al.  Optimal Design of Moving-Magnet Type Actuators for Optical Disk Drives Considering Effect of Coil Electromagnet , 2009, IEEE Transactions on Magnetics.

[4]  O. B. Ozdoganlar,et al.  Design and evaluation of a mechanical nanomanufacturing system for nanomilling , 2012 .

[5]  A. H. Slocum,et al.  Precision machine design: macromachine design philosophy and its applicability to the design of micromachines , 1992, [1992] Proceedings IEEE Micro Electro Mechanical Systems.

[6]  J. Jerald,et al.  A Review on Current Research Aspects in Tool-Based Micromachining Processes , 2014 .

[7]  Richard S. Pappa,et al.  A consistent-mode indicator for the eigensystem realization algorithm , 1992 .

[8]  David L. Trumper,et al.  Self-Calibration of On-Axis Rotary Encoders , 2007 .

[9]  Paul Sas,et al.  Modal Analysis Theory and Testing , 2005 .

[10]  William Bolton.  Mechatronics - electronic control systems in mechanical engineering , 1995 .

[11]  Robert H. Bishop,et al.  The mechatronics handbook , 2002 .

[12]  D. Gillet,et al.  Strategy for the Control of a Dual-stage Nano-positioning System with a Single Metrology , 2006, 2006 IEEE Conference on Robotics, Automation and Mechatronics.

[13]  P L Heydemann,et al.  Determination and correction of quadrature fringe measurement errors in interferometers. , 1981, Applied optics.

[14]  Jangwon Lee,et al.  Topological Shape Optimization of Permanent Magnet in Voice Coil Motor Using Level Set Method , 2012, IEEE Transactions on Magnetics.

[15]  Tat Joo Teo,et al.  A flexure-based electromagnetic nanopositioning actuator with predictable and re-configurable open-loop positioning resolution , 2015 .

[16]  Terril Hurst,et al.  Measurements for the PES Pareto method of identifying contributors to disk drive servo system errors , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[17]  Hayato Yoshioka,et al.  A newly developed STM-based coordinate measuring machine , 2012 .

[18]  Chih-Liang Chu,et al.  A novel long-travel piezoelectric-driven linear nanopositioning stage , 2006 .

[19]  W. Monkhorst.  Dynamic Error Budgeting: A design approach , 2004 .

[20]  Tadahiko Shinshi,et al.  Control of an XY Nano-Positioning Table for a Compact Nano-Machine Tool , 2006 .

[21]  Mariam Ghazaly,et al.  Characteristic switching of a multilayer thin electrostatic actuator by a driving signal for an ultra-precision motion stage , 2013 .

[22]  J. Bendat,et al.  Random Data: Analysis and Measurement Procedures , 1987 .

[23]  T. Hausotte,et al.  Recent developments and challenges of nanopositioning and nanomeasuring technology , 2012 .

[24]  Anders Brandt,et al.  Noise and Vibration Analysis: Signal Analysis and Experimental Procedures , 2011 .

[25]  Tsu-Chin Tsao,et al.  Multi-scale Alignment and Positioning System – MAPS , 2012 .

[26]  Kuang-Chao Fan,et al.  A BPNN-PID based long-stroke nanopositioning control scheme driven by ultrasonic motor , 2012 .

[27]  Rong-Fong Fung,et al.  Precision position control using combined piezo-VCM actuators , 2005 .

[28]  Toshiro Higuchi,et al.  A novel precision positioning table utilizing impact force of spring-mounted piezoelectric actuator—part I: experimental design and results , 2003 .

[29]  Christian Brecher,et al.  Five-axes accuracy enhancement by compact and integral design , 2009 .

[30]  Paulo Sergio Varoto,et al.  Vibration Testing: Theory and Practice , 1995 .

[31]  Goro Obinata,et al.  Air-bearing linear actuator for highly precise tracking , 2003 .

[32]  P. R. Ouyang,et al.  Micro-motion devices technology: The state of arts review , 2008 .

[33]  Ki-Jung Kim,et al.  Dynamic Performance Evaluation of 5-DOF Magnetic Levitation and Guidance Device by Using Equivalent Magnetic Circuit Model , 2013, IEEE Transactions on Magnetics.

[34]  L. Jabben.  Mechatronic design of a magnetically suspended rotating platform , 2007 .

[35]  Ian MacKenzie.  Design and control methods for high-accuracy variable reluctance actuators , 2015 .

[36]  T. Schmitz,et al.  Machining Dynamics: Frequency Response to Improved Productivity , 2008 .

[37]  Stuart T. Smith,et al.  Design evaluation of a single-axis precision controlled positioning stage , 2009 .

[38]  Shorya Awtar,et al.  Design of a Large Range XY Nanopositioning System , 2010 .

[39]  Andrew J. Fleming,et al.  Design, Modeling and Control of Nanopositioning Systems , 2014 .

[40]  Robert Schmitt,et al.  Geometric error measurement and compensation of machines : an update , 2008 .

[41]  Yusuf Altintas,et al.  Magnetically levitated six degree of freedom rotary table , 2015 .

[42]  Stuart T. Smith,et al.  Design and control for an electromagnetically driven X–Y–θ stage , 2002 .

[43]  Eiji Shamoto,et al.  Ultraprecision 6-Axis Table Driven by Means of Walking Drive , 2000 .

[44]  Hayato Yoshioka,et al.  A newly developed long range positioning table system with a sub-nanometer resolution , 2011 .

[45]  Hayato Yoshioka,et al.  A Newly Developed Linear Motor-Driven Aerostatic X-Y Planar Motion Table System for Nano-Machining , 2007 .

[46]  Shalom D. Ruben,et al.  Modeling, Control, and Real-Time Optimization for a Nano-Precision System , 2010 .

[47]  Jack B. Kuipers,et al.  Quaternions and Rotation Sequences: A Primer with Applications to Orbits, Aerospace and Virtual Reality , 2002 .

[48]  J. Gorniak.  Design and Metrology of a Precision XY Planar Stage , 2010 .

[49]  Badong Chen,et al.  Optimization of Voice Coil Motor to Enhance Dynamic Response Based on an Improved Magnetic Equivalent Circuit Model , 2011, IEEE Transactions on Magnetics.

[50]  Ian Postlethwaite,et al.  Multivariable Feedback Control: Analysis and Design , 1996 .

[51]  Nuno M. M. Maia,et al.  Theoretical and Experimental Modal Analysis , 1997 .

[52]  Chien-Hung Liu,et al.  Design and control of a long-traveling nano-positioning stage , 2010 .

[53]  Hi-Dong Chai.  Electromechanical motion devices , 1998 .

[54]  Neil A. Duffie,et al.  Comparison of Combinatorial Rules for Machine Error Budgets , 1993 .

[55]  P. A. McKeown,et al.  The Design of an Ultra-Precision CNC Measuring Machine , 1989 .

[56]  C. Wagner,et al.  EUV lithography: Lithography gets extreme , 2010 .

[57]  James F. Cuttino,et al.  Design and testing of a long-range, precision fast tool servo system for diamond turning , 2009 .

[58]  Simon S. Park,et al.  Investigation of micro-cutting operations , 2006 .

[59]  Huzefa Shakir,et al.  Design and precision construction of novel magnetic-levitation-based multi-axis nanoscale positioning systems , 2007 .

[60]  Martin L. Culpepper,et al.  Design of a six-axis micro-scale nanopositioner—μHexFlex , 2006 .

[61]  Nnn Anyanna,et al.  Promising Applications of Neodymium Boron Iron Magnets in Electrical Machines , 2009 .

[62]  Kazuo Yamazaki,et al.  Development of 5-Axis Linear Motor Driven Super-Precision Machine , 2006 .

[63]  Jiong Tang,et al.  Design of a linear-motion dual-stage actuation system for precision control , 2009 .

[64]  Zhipeng Zhang,et al.  Six-Axis Magnetic Levitation and Motion Control , 2007, IEEE Transactions on Robotics.

[65]  Xianmin Zhang,et al.  A planar 3-DOF nanopositioning platform with large magnification , 2016 .

[66]  Terril Hurst,et al.  Decomposition of baseline noise sources in hard disk position error signals using the PES Pareto method , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[67]  D. J. Ewins,et al.  Modal Testing: Theory and Practice , 1984 .

[68]  L. Encica,et al.  Manifold-mapping optimization applied to linear actuator design , 2006, IEEE Transactions on Magnetics.

[69]  David L. Trumper,et al.  Ultrafast Tool Servos for Diamond Turning , 2005 .

[70]  Samir Mekid.  Introduction to precision machine design and error assessment , 2008 .

[71]  Richard C. Dorf,et al.  The Electrical Engineering Handbook , 1993 .

[72]  Xiaodong Lu,et al.  Six-axis position measurement system for levitated motion stages , 2013 .

[73]  Lee Tong Heng,et al.  Precision Motion Control: Design and Implementation , 2008 .

[74]  M. Furukawa,et al.  Triple-Stage-Actuator System of Head-Positioning Control in Hard Disk Drives , 2012, IEEE Transactions on Magnetics.

[75]  Guido De Roeck,et al.  Fully automated (operational) modal analysis , 2012 .

[76]  Anastasios John Hart,et al.  Linear motion carriage with aerostatic bearings preloaded by inclined iron core linear electric motor , 2003 .

[77]  Dong Min Kim,et al.  Optimal design of high precision XY-scanner with nanometer-level resolution and millimeter-level working range , 2009 .

[78]  John R. Brauer.  Magnetic Actuators and Sensors , 2006 .

[79]  Shorya Awtar,et al.  Large Dynamic Range Nanopositioning Using Iterative Learning Control , 2012 .

[80]  William T. Estler,et al.  Measurement technologies for precision positioning , 2015 .

[81]  David Dornfeld,et al.  Machine design for precision manufacturing , 2008 .

[82]  Dae-Gab Gweon,et al.  Design and control of a nanoprecision XY scanner , 2008 .

[83]  Y. Çengel.  Heat Transfer: A Practical Approach , 1997 .

[84]  Terril Hurst,et al.  The PES Pareto method: uncovering the strata of position error signals in disk drives , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[85]  Yung-Tien Liu,et al.  A 3-axis precision positioning device using PZT actuators with low interference motions , 2016 .

[86]  Tilo Pfeifer,et al.  Scales vs. laser interferometers performance and comparison of two measuring systems , 1993 .

[87]  P. Guillaume,et al.  The PolyMAX Frequency-Domain Method: A New Standard for Modal Parameter Estimation? , 2004 .

[88]  Jacek F. Gieras,et al.  Permanent magnet motor technology : design and applications , 1996 .