Finite Element Model of Mechanically Induced Collagen Fiber Synthesis and Degradation in the Aortic Valve

AbstractTissue-engineered trileaflet aortic valves are a promising alternative to current valve replacements. However, the mechanical properties of these valves are insufficient for implantation at the aortic position. To simulate the effect of collagen remodeling on the mechanical properties of the aortic valve, a finite element model is presented. In this study collagen remodeling is assumed to be the net result of collagen synthesis and degradation. A limited number of fibers with low initial fiber volume fraction is defined, and depending on the loading condition, the fibers are either synthesized or degraded. The synthesis and degradation of collagen fibers are both assumed to be functions of individual fiber stretch and fiber volume fraction. Simulations are performed for closed aortic valve configurations and the open aortic valve configuration. The predicted fiber directions for the closed configurations are close to the fiber directions as measured in the native aortic valve. The model predicts the evolution in collagen fiber content and the effect of remodeling on the mechanical properties. © 2003 Biomedical Engineering Society. PAC2003: 8715La, 8719Rr, 8710+e, 8780Rb, 8768+z

[1]  M. Sacks,et al.  Biaxial mechanical properties of the natural and glutaraldehyde treated aortic valve cusp--Part I: Experimental results. , 2000, Journal of biomechanical engineering.

[2]  F P T Baaijens,et al.  A three-dimensional computational analysis of fluid-structure interaction in the aortic valve. , 2003, Journal of biomechanics.

[3]  A. McCulloch,et al.  Multiaxial myocardial mechanics and extracellular matrix remodeling: mechanochemical regulation of cardiac fibroblast function. , 1997, Advances in experimental medicine and biology.

[4]  K Hayashi,et al.  Biomechanical studies of the remodeling of knee joint tendons and ligaments. , 1996, Journal of biomechanics.

[5]  Cătălin Tănase,et al.  On the stall force for growing microtubules , 2000, European Biophysics Journal.

[6]  G. Oster,et al.  The polymerization ratchet model explains the force-velocity relation for growing microtubules , 1999, European Biophysics Journal.

[7]  R T Tranquillo,et al.  A finite element solution for the anisotropic biphasic theory of tissue-equivalent mechanics: the effect of contact guidance on isometric cell traction measurement. , 1997, Journal of biomechanical engineering.

[8]  P Rüegsegger,et al.  Effect of mechanical set point of bone cells on mechanical control of trabecular bone architecture. , 1998, Bone.

[9]  Robert A. Brown,et al.  Duration and orientation of mechanical loads determine fibroblast cyto‐mechanical activation: Monitored by protease release , 2000, Wound Repair and Regeneration.

[10]  J D Humphrey,et al.  Remodeling of a collagenous tissue at fixed lengths. , 1999, Journal of biomechanical engineering.

[11]  H. Saunders.  Book Reviews : NUMERICAL METHODS IN FINITE ELEMENT ANALYSIS K.-J. Bathe and E.L. Wilson Prentice-Hall, Inc, Englewood Cliffs, NJ , 1978 .

[12]  I Vesely,et al.  The role of elastin in aortic valve mechanics. , 1997, Journal of biomechanics.

[13]  F J Schoen,et al.  Functional Living Trileaflet Heart Valves Grown In Vitro , 2000, Circulation.

[14]  van de Fn Frans Vosse,et al.  Mechanics & design of fiber-reinforced vascular prostheses , 2002 .

[15]  K. Bathe.  Finite Element Procedures , 1995 .

[16]  J A Sherratt,et al.  Mathematical modelling of extracellular matrix dynamics using discrete cells: fiber orientation and tissue regeneration. , 1999, Journal of theoretical biology.

[17]  F. Silver,et al.  Collagen fiber formation in repair tissue: development of strength and toughness. , 1985, Collagen and related research.

[18]  David B. Smith,et al.  The aortic valve microstructure: effects of transvalvular pressure. , 1998, Journal of biomedical materials research.

[19]  R T Tranquillo,et al.  An anisotropic biphasic theory of tissue-equivalent mechanics: the interplay among cell traction, fibrillar network deformation, fibril alignment, and cell contact guidance. , 1997, Journal of biomechanical engineering.

[20]  I Vesely,et al.  The effect of elastin damage on the mechanics of the aortic valve. , 2001, Journal of biomechanics.

[21]  Christopher J. O’Callaghan,et al.  Mechanical Strain–Induced Extracellular Matrix Production by Human Vascular Smooth Muscle Cells: Role of TGF-&bgr;1 , 2000, Hypertension.

[22]  E S Grood,et al.  Uniaxial tension inhibits tendon collagen degradation by collagenase in vitro , 1996, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[23]  F J Schoen,et al.  Founder's Award, 25th Annual Meeting of the Society for Biomaterials, perspectives. Providence, RI, April 28-May 2, 1999. Tissue heart valves: current challenges and future research perspectives. , 1999, Journal of biomedical materials research.

[24]  M. Rekhter,et al.  Effect of mechanical forces on growth and matrix protein synthesis in the in vitro pulmonary artery. Analysis of the role of individual cell types. , 1995, Circulation research.

[25]  Rik Huiskes,et al.  Effects of mechanical forces on maintenance and adaptation of form in trabecular bone , 2000, Nature.

[26]  Jacques M Huyghe,et al.  Computational analyses of mechanically induced collagen fiber remodeling in the aortic heart valve. , 2003, Journal of biomechanical engineering.

[27]  J. Voorhees,et al.  Inhibition of type I procollagen production in photodamage: correlation between presence of high molecular weight collagen fragments and reduced procollagen synthesis. , 2002, The Journal of investigative dermatology.

[28]  Frederick J. Schoen,et al.  Early In Vivo Experience With Tissue-Engineered Trileaflet Heart Valves , 2000, Circulation.

[29]  C. Peskin,et al.  Mechanical equilibrium determines the fractal fiber architecture of aortic heart valve leaflets. , 1994, The American journal of physiology.

[30]  C S Peskin,et al.  Cellular motions and thermal fluctuations: the Brownian ratchet. , 1993, Biophysical journal.

[31]  F. Grinnell,et al.  Studies on the mechanism of hydrated collagen gel reorganization by human skin fibroblasts. , 1985, Journal of cell science.

[32]  Robert A. Brown,et al.  Mechanical loading regulates protease production by fibroblasts in three‐dimensional collagen substrates , 2000, Wound repair and regeneration : official publication of the Wound Healing Society [and] the European Tissue Repair Society.

[33]  M. Sacks,et al.  Biaxial mechanical properties of the native and glutaraldehyde-treated aortic valve cusp: Part II--A structural constitutive model. , 2000, Journal of biomechanical engineering.

[34]  Aahj Fons Sauren.  The mechanical behaviour of the aortic valve , 1981 .

[35]  P. Fratzl,et al.  Viscoelastic properties of collagen: synchrotron radiation investigations and structural model. , 2002, Philosophical transactions of the Royal Society of London. Series B, Biological sciences.

[36]  J. Ellsmere,et al.  Mechanical loading of bovine pericardium accelerates enzymatic degradation. , 1999, Biomaterials.