The use of biomass syngas in IC engines and CCGT plants: A comparative analysis

Abstract This paper studies the use of biomass syngas, obtained from pyrolysis or gasification, in traditional energy-production systems, specifically internal combustion (IC) engines and combined cycle gas turbine (CCGT) plants. The biomass conversion stage has been simulated by means of a gas–solid thermodynamic model. The IC and CCGT plant configurations were optimised to maximise heat and power production. Several types of biomass feedstock were studied to assess their potential for energy production and their effect on the environment. This system was also compared with the coupling between biomass gasification and fuel cells.

[1]  Wim Turkenburg,et al.  Gasification of biomass wastes and residues for electricity production. , 1995 .

[2]  Krister Sjöström,et al.  Catalytic tar decomposition of biomass pyrolysis gas with a combination of dolomite and silica , 2002 .

[3]  Emmanuel Kakaras,et al.  High temperature solid oxide fuel cell integrated with novel allothermal biomass gasification: Part I: Modelling and feasibility study , 2006 .

[4]  William R. Smith,et al.  Chemical Reaction Equilibrium Analysis: Theory and Algorithms , 1982 .

[5]  Maurizio Fermeglia,et al.  Steady state simulation of energy production from biomass by molten carbonate fuel cells , 2006 .

[6]  Timo Kivisaari,et al.  Studies of biomass fuelled MCFC systems , 2002 .

[7]  Osterfelder Strasse,et al.  Tar measurement standard for sampling and analysis of tars and particles in biomass gasification product gas , 2005 .

[8]  Emmanuel Kakaras,et al.  High temperature solid oxide fuel cell integrated with novel allothermal biomass gasification: Part II: Exergy analysis , 2006 .

[9]  N. Woudstra,et al.  Feasibility study of wood biomass gasification/molten carbonate fuel cell power system—comparative characterization of fuel cell and gas turbine systems , 2004 .

[10]  Jason T. McMullan,et al.  Wood-fired fuel cells in selected buildings , 2003 .

[11]  A. Bridgwater.  The technical and economic feasibility of biomass gasification for power generation , 1995 .

[12]  P. Paul,et al.  Biomass derived producer gas as a reciprocating engine fuel—an experimental analysis , 2001 .

[13]  Kunio Yoshikawa,et al.  Research and development of a low-BTU gas-driven engine for waste gasification and power generation , 2005 .

[14]  O. T. Olakoyejo,et al.  A thermodynamic analysis of a biogas-fired integrated gasification steam injected gas turbine (BIG/STIG) plant , 2007 .

[15]  D McIlveen-Wright,et al.  Wood-fired fuel cells in an isolated community , 2002 .

[16]  Viktor Hacker,et al.  Usage of biomass gas for fuel cells by the SIR process , 1998 .

[17]  Marco Baratieri,et al.  Process analysis of a molten carbonate fuel cell power plant fed with a biomass syngas , 2006 .

[18]  Martin A. Reno,et al.  Coefficients for calculating thermodynamic and transport properties of individual species , 1993 .

[19]  T. Nussbaumer,et al.  Gas cleaning for IC engine applications from fixed bed biomass gasification , 1999 .

[20]  K. Stȧhl,et al.  IGCC power plant for biomass utilisation, Värnamo, Sweden , 1997 .

[21]  L. Fiori,et al.  Biomass as an energy source: thermodynamic constraints on the performance of the conversion process. , 2008, Bioresource technology.

[22]  Daniele Cocco,et al.  Performance evaluation of small size externally fired gas turbine (EFGT) power plants integrated with direct biomass dryers , 2006 .

[23]  M. D. Souza-Santos,et al.  A feasibility study of an alternative power generation system based on biomass gasification/gas turbine concept , 1999 .