Autonomous Microrobots
暂无分享,去创建一个
Robots have been a subject of research for almost half a century. In order to make robots more versatile they must be able to operate in a semi-structured work place where unforeseen events occur and where sensor data are incomplete. An entire research community has been working on this problem and many unique autonomous and so-called intelligent robots have been conceived and built. Most of these efforts are concerned with robots that operate in the macroworld where they take on chores that could also be handled by humans. However, there is the mocroworld in which manipulation and handling tasks are very difficult and for which a human has no tools and where the work area is so small that fine manual manipulation is almost impossible. This paper is concerned with autonomous robots that can operate in a microworld, where microassembly operations, microsurgery or integrated circuit testing and repair is done. For independent operations, these robots need special sensors and an efficient computer architecture that hosts the planner and executor. There are also special drive systems and effectors necessary for micromotions and micromanipulations, respectively. An attempt is made to describe these components and the problems encountered in configuring them to a microrobot. As an example of advanced microrobots, the design and functions of several autonomous microrobots of the University of Karlsruhe are shown; they employ different locomotion and subject handling principles. The paper also includes a discussion of the typical operating problems caused by the microworld and of future research that has to be done to conceive and build efficient microrobots.
[1] Ulrich Rembold,et al. An automated microrobot-based desktop station for micro assembly and handling of micro-objects , 1996, Proceedings 1996 IEEE Conference on Emerging Technologies and Factory Automation. ETFA '96.
[2] Ulrich Rembold,et al. Actuation in microsystems: problem field overview and practical example of the piezoelectric robot for handling of microobjects , 1995, Proceedings 1995 INRIA/IEEE Symposium on Emerging Technologies and Factory Automation. ETFA'95.