Texture analysis with a time-of-flight neutron strain scanner

A time-of-flight (TOF) neutron strain scanner is a white-beam instrument optimized to measure diffractograms at precise locations within bulky specimens, typically along two perpendicular sample orientations. Here, a method is proposed that exploits the spatial resolution (∼1 mm) provided by such an instrument to determine in a nondestructive manner the crystallographic texture at selected locations within a macroscopic object. The method is based on defining the orientation distribution function (ODF) of the crystallites from several incomplete pole figures, and it has been implemented on ENGIN-X, a neutron strain scanner at the ISIS facility in the UK. This method has been applied to determine the texture at different locations of Al alloy plates welded along the rolling direction and to study a Zr2.5%Nb pressure tube produced for a CANDU nuclear power plant. For benchmarking, the results obtained with this instrument for samples of ferritic steel, copper, Al alloys and Zr alloys have been compared with measurements performed using conventional X-ray diffractometers and more established neutron techniques. For cases where pole figure coverage is incomplete, the use of TOF neutron transmission measurements simultaneously performed on the specimens is proposed as a simple and powerful test to validate the resulting ODF.

[1]  K. Akita,et al.  Effects of gauge volume on pseudo-strain induced in strain measurement using time-of-flight neutron diffraction , 2013 .

[2]  Jason McPhate,et al.  Texture imaging of zirconium based components by total neutron cross-section experiments , 2012 .

[3]  W. Gan,et al.  Texture analysis at neutron diffractometer STRESS-SPEC , 2011 .

[4]  J. Santisteban,et al.  Casting technology of Renaissance bronze statuettes: the use of TOF-neutron diffraction for studying afterwork of Renaissance casting techniques , 2011 .

[5]  J. Almer,et al.  Phase and texture analysis of a hydride blister in a Zr―2.5%Nb tube by synchrotron X-ray diffraction , 2011 .

[6]  L. Wenchao,et al.  Deformation and recrystallization textures in straight-rolled and pseudo cross-rolled AA 3105 aluminum alloy , 2010 .

[7]  Helmut Schaeben,et al.  A novel pole figure inversion method: specification of the MTEX algorithm , 2008 .

[8]  Michael E. Fitzpatrick,et al.  Analysis of residual stress in metal-inert-gas-welded Al-2024 using neutron and synchrotron X-ray diffraction , 2008 .

[9]  R. A. Holt.  In-reactor deformation of cold-worked Zr–2.5Nb pressure tubes , 2008 .

[10]  G. Artioli.  Crystallographic texture analysis of archaeological metals: interpretation of manufacturing techniques , 2007 .

[11]  Mark R. Daymond,et al.  ENGIN-X: a third-generation neutron strain scanner , 2006 .

[12]  Oliver Kirstein,et al.  Residual stress diffractometer KOWARI at the Australian research reactor OPAL: Status of the project , 2006 .

[13]  W. Kockelmann,et al.  Neutron texture analysis on GEM at ISIS , 2006 .

[14]  Alexandru Dan Stoica,et al.  VULCAN—The engineering diffractometer at the SNS , 2006 .

[15]  Mark R. Daymond,et al.  NON‐DESTRUCTIVE INVESTIGATION OF BRONZE ARTEFACTS FROM THE MARCHES NATIONAL MUSEUM OF ARCHAEOLOGY USING NEUTRON DIFFRACTION* , 2006 .

[16]  J. Santisteban.  Time-of-flight neutron transmission of mosaic crystals , 2005 .

[17]  Alex C. Hannon,et al.  Results on disordered materials from the GEneral Materials diffractometer, GEM, at ISIS ☆ , 2005 .

[18]  H. Wenk,et al.  Quantitative texture analysis with the HIPPO neutron TOF diffractometer , 2005 .

[19]  P. J. Bouchard,et al.  Measurement of the residual stresses in a stainless steel pipe girth weld containing long and short repairs , 2005 .

[20]  P. Withers,et al.  Introduction to the Characterization of Residual Stress by Neutron Diffraction , 2005 .

[21]  Mark R. Daymond,et al.  A virtual laboratory for neutron and synchrotron strain scanning , 2004 .

[22]  S. Siano,et al.  “Neutron metallography” of archaeological bronzes , 2004 .

[23]  H. Wenk,et al.  Texture analysis with the new HIPPO TOF diffractometer , 2003 .

[24]  Michael E. Fitzpatrick,et al.  Analysis of Residual Stress by Diffraction using Neutron and Synchrotron Radiation , 2003 .

[25]  D. C. Dunand,et al.  SMARTS – a spectrometer for strain measurement in engineering materials , 2002 .

[26]  Olaf Engler,et al.  Texture control by thermomechanical processing of AA6xxx Al–Mg–Si sheet alloys for automotive applications—a review , 2002 .

[27]  S. Matthies.  20 Years WIMV, History, Experience and Contemporary Developments , 2002 .

[28]  Mark R. Daymond,et al.  Strain imaging by Bragg edge neutron transmission , 2002 .

[29]  H. Bunge,et al.  Experimental determination of the instrumental transparency function of texture goniometers , 2000 .

[30]  Christian Scheffzük,et al.  Neutron time-of-flight diffractometer epsilon for strain measurements: layout and first results , 2000 .

[31]  U. F. Kocks,et al.  Texture and Anisotropy: Preferred Orientations in Polycrystals and their Effect on Materials Properties , 1998 .

[32]  A. N. Nikitin,et al.  The SKAT texture diffractometer at the pulsed reactor IBR-2 at Dubna: experimental layout and first measurements , 1998 .

[33]  J. Dutkiewicz,et al.  STRUCTURE, TEXTURE AND MECHANICAL PROPERTIES OF ALZNMGCUZR ALLOY ROLLED AFTER HEAT TREATMENTS , 1997 .

[34]  Robert J. Asaro,et al.  Through-Thickness Texture Gradients in Rolled Polycrystalline Alloys , 1996 .

[35]  H. Wenk,et al.  Optimization of Texture Measurements by Pole Figure Coverage with Hexagonal Grids , 1992 .

[36]  J. S. Kallend,et al.  OPERATIONAL TEXTURE ANALYSIS , 1991 .

[37]  Jürgen Hirsch,et al.  Overview no. 76: Mechanism of deformation and development of rolling textures in polycrystalline f.c.c. metals—I. Description of rolling texture development in homogeneous CuZn alloys , 1988 .

[38]  M. A. Przystupa,et al.  On through thickness crystallographic texture gradient in Al-Li-Cu-Zr alloy , 1988 .

[39]  Carla Andreani,et al.  Neutron diffraction methods for the study of residual stress fields , 1985 .

[40]  J. R. Granada,et al.  The bragg lineshapes in time-of-flight neutron powder spectroscopy , 1982 .

[41]  P. Schofield.  Theory of Thermal Neutron Scattering – the Use of Neutrons for the Investigation of Condensed Matter , 1972 .

[42]  E. Fermi,et al.  Interference Phenomena of Slow Neutrons , 1947 .

[43]  R. Engels,et al.  Neutrons in cultural heritage research , 2006 .

[44]  Hans-Rudolf Wenk,et al.  Combined texture and structure analysis of deformed limestone from time-of-flight neutron diffraction spectra , 1997 .

[45]  J. Jonas,et al.  Cold rolling and annealing textures in low carbon and extra low carbon steels , 1994 .

[46]  Anthony D. Rollett,et al.  popLA AN INTEGRATED SOFTWARE SYSTEM FOR TEXTURE ANALYSIS , 1991 .