Prediction of liquation crack initiation at HAZ of laser weldment based on three dimensional strain analysis at elevated temperature
暂无分享,去创建一个
The purpose of this study is to develop thermal and dynamic three dimensional strain analysis method for the laser weldment in order to obtain the plastic strain at elevated temperature in HAZ of the laser weldment, and to develop the prediction method of liquation crack initiation in HAZ of laser weldment. The U-type hot cracking test was performed as an experimental evaluation method for liquation cracking susceptibility of laser weldments of Inconel 718. At the same time, thermal and dynamic three dimensional elastplastic strain analyses were performed by FEM for U-type hot cracking test specimens. Heat transfer analysis and elastplastic strain analysis for laser weldments were confirmed by experiments. From this analysis, it becomes clear that the plastic strain at elevated temperature affects liquation crack initiation in HAZ, and the critical strain at elevated temperature, which controlled liquation crack initiation, can be calculated precisely by using this proposed analysis method.
[1] K. Shinozaki,et al. Comparison of hot cracking susceptibilities of various Ni-base, heat-resistant superalloys by U-type hot cracking test. Study of laser weldability of Ni-base, heat-resistant superalloys (2nd Report) , 1999 .
[2] K. Nishimoto,et al. The Factors Affecting HAZ Crack Susceptibility in the Laser Weld. Study on Weldability of Cast Alloy 718. Report 4. , 2001 .