A heat transfer parameter at air interfaces in the BLOCK model for building thermal environment

Abstract A temperature-based zonal model (BLOCK model), proposed by Togari et al. [21], is improved in this study through determining a heat transfer factor between air layers. This factor has not been reasonably clarified and theoretically determined. Such shortage has long limited the applications of the model to building thermal environment and energy. In the present work, it is clarified to the combined laminar and turbulent diffusion of energy in the airflows. A physical definition is presented based on the one-dimensional thermal transport equation without advective and transient terms. Computational fluid dynamics (CFD) is used to calculate the values of the factor at air interfaces specified and to verify the physical definition. Calculated values are found to agree well with those assumed to reproduce the experimental data by Togari et al. [21], and are able to represent the thermal gradients observed in the experiments. This study intends to clarify and explain the nature of heat transfer factor between air layers in the BLOCK model and to promote its real applications.

[1]  Qingyan Chen,et al.  On approaches to couple energy simulation and computational fluid dynamics programs , 2002 .

[2]  James W. Axley,et al.  Surface-drag flow relations for zonal modeling , 2001 .

[3]  Vice President,et al.  AMERICAN SOCIETY OF HEATING, REFRIGERATION AND AIR CONDITIONING ENGINEERS INC. , 2007 .

[4]  Fariborz Haghighat,et al.  A new generation of zonal models , 2006 .

[5]  Marjorie Musy,et al.  Building Zonal Thermal and Airflow Modelling - A Review , 2005 .

[6]  Francis Allard,et al.  Modélisation d'un panache d'émetteur de chaleur pour le logiciel de simulation énergétique des bâtiments SPARK , 2000 .

[7]  G.G.J. Achterbosch,et al.  The development of a comvenient thermal dynamic building model , 1985 .

[8]  Brent T. Griffith,et al.  Incorporating nodal and zonal room air models into building energy calculation procedures , 2002 .

[9]  A.H.C. van Paassen,et al.  Prediction of room thermal response by CFD technique with conjugate heat transfer and radiation models , 1995 .

[10]  E. Eckert,et al.  Analysis of turbulent free-convection boundary layer on flat plate , 1951 .

[11]  John W. Mitchell.  Editorial: International Journal of HVAC&R Research , 2007 .

[12]  Wan Ki Chow.  Assessment of Thermal Environment in an Atrium with Air-Conditioning , 1996 .

[13]  J. W. Hanford,et al.  Relationship between electrical loads and ambient temperature in two monitored commercial buildings , 1986 .

[14]  R. Kessler,et al.  Comparison of finite-volume numerical methods with staggered and colocated grids , 1988 .

[15]  B. P. Leonard,et al.  ULTRA-SHARP Nonoscillatory Convection Schemes for High-Speed Steady Multidimensional Flow , 1990 .

[16]  X. Yuan,et al.  Numerical modeling of heat transfer by radiation and convection in an atrium with thermal inertia , 1995 .

[17]  Jun Gao,et al.  A Zonal Model for Large Enclosures With Combined Stratification Cooling and Natural Ventilation: Part 1—Model Generation and its Procedure , 2006 .

[18]  F. Haghighat,et al.  Zonal Modeling for Simulating Indoor Environment of Buildings: Review, Recent Developments, and Applications , 2007 .

[19]  Satoshi Togari,et al.  Unsteady-state thermal analysis of a large space with vertical temperature distribution , 1994 .