Analysis of Transient Flow Caused by Fluctuating Consumptions in Pipe Networks: A Many-Objective Genetic Algorithm Approach

Small, but fast fluctuating consumptions in a pipe network can lead to severe transient flows. Such fluctuations are stochastic in nature and, cannot be explicitly identified and analyzed for the systems in operation. This study introduces a mathematical model for taking into account the fluctuating consumptions in analysis and design of pipe networks. For this purpose, the fluctuations are simulated by two successive triangular pulses with adjustable geometry. A many-objective optimization problem is developed to find the worst maximum and minimum pressure heads. A new scheme of genetic algorithms is developed to find the extreme values of all pressure heads in only one single simulation run. The proposed model is applied to two water distribution networks. It is found that, the transient flow caused by fast fluctuating consumptions could seriously affect the system’s performance. For instance, analyzing a real pipe network reveals that, when the fluctuations are critically combined, the nodal pressure heads averagely change by 29 % (13 to 88 %) and −43 % (−16 to −177 %) with respect to the initial steady state.

[1]  Ali Haghighi,et al.  A fuzzy approach for considering uncertainty in transient analysis of pipe networks , 2012 .

[2]  Angus R. Simpson,et al.  Optimal Measurement Site Locations for Inverse Transient Analysis in Pipe Networks , 2003 .

[3]  Edmundo Koelle,et al.  Fluid transients in pipe networks , 1991 .

[4]  K Sridharan,et al.  Inverse transient analysis in pipe networks , 1996 .

[5]  Angus R. Simpson,et al.  Leak Detection and Calibration Using Transients and Genetic Algorithms , 2000 .

[6]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[7]  Giuseppe De Martino,et al.  Transient Flow Caused by Air Expulsion through an Orifice , 2008 .

[8]  Zoran S. Kapelan,et al.  A hybrid inverse transient model for leakage detection and roughness calibration in pipe networks , 2003 .

[9]  Mohammad Najafi.  New Pipeline Technologies, Security, and Safety , 2003 .

[10]  Helena M. Ramos,et al.  Water Supply System Performance for Different Pipe Materials Part II: Sensitivity Analysis to Pressure Variation , 2009 .

[11]  Paul F. Boulos,et al.  Effect of pressure‐sensitive demand on surge analysis , 2009 .

[12]  Ali Haghighi,et al.  Transient generation in pipe networks for leak detection , 2011 .

[13]  Yeou-Koung Tung,et al.  Probabilistic Analysis of Transient Design for Water Supply Systems , 2010 .

[14]  Bryan W. Karney,et al.  Hydraulic Optimization of Transient Protection Devices Using GA and PSO Approaches , 2006 .

[15]  Bryan W. Karney,et al.  Transient Modeling of a Full-Scale Distribution System: Comparison with Field Data , 2011 .

[16]  R S Foster.  CASE STUDY OF HYDRAULIC TRANSIENTS GENERATED BY MICROFILTRATION PROCESSES , 2003 .

[17]  Helena M. Ramos,et al.  Detection of Leakage Freshwater and Friction Factor Calibration in Drinking Networks Using Central Force Optimization , 2012, Water Resources Management.

[18]  James A. Liggett,et al.  LEAKS IN PIPE NETWORKS , 1992 .

[19]  Bryan W. Karney,et al.  Hydraulic Transient Guidelines for Protecting Water Distribution Systems , 2005 .

[20]  Ali Haghighi,et al.  Optimum leak detection and calibration of pipe networks by inverse transient analysis , 2010 .

[21]  Hanif M. Chaudhry,et al.  Applied Hydraulic Transients , 1979 .