Two-phase pressure drop and flow visualization of FC-72 in a silicon microchannel heat sink

Abstract The rapid development of two-phase microfluidic devices has triggered the demand for a detailed understanding of the flow characteristics inside microchannel heat sinks to advance the cooling process of micro-electronics. The present study focuses on the experimental investigation of pressure drop characteristics and flow visualization of a two-phase flow in a silicon microchannel heat sink. The microchannel heat sink consists of a rectangular silicon chip in which 45 rectangular microchannels were chemically etched with a depth of 276 μm, width of 225 μm, and a length of 16 mm. Experiments are carried out for mass fluxes ranging from 341 to 531 kg/m 2  s and heat fluxes from 60.4 to 130.6 kW/m 2 using FC-72 as the working fluid. Bubble growth and flow regimes are observed using high speed visualization. Three major flow regimes are identified: bubbly, slug, and annular. The frictional two-phase pressure drop increases with exit quality for a constant mass flux. An assessment of various pressure drop correlations reported in the literature is conducted for validation. A new general correlation is developed to predict the two-phase pressure drop in microchannel heat sinks for five different refrigerants. The experimental pressure drops for laminar-liquid laminar-vapor and laminar-liquid turbulent-vapor flow conditions are predicted by the new correlation with mean absolute errors of 10.4% and 14.5%, respectively.

[1]  J. Thome,et al.  Convective Boiling and Condensation , 1972 .

[2]  A. Mosyak,et al.  CONVECTIVE BOILING IN PARALLEL MICROCHANNELS , 2004, Proceeding of Advances in Heat Transfer Engineering.

[3]  S. Garimella,et al.  Saturated flow boiling heat transfer and pressure drop in silicon microchannel arrays , 2008 .

[4]  Honggi Cho,et al.  MASS FLOW RATE DISTRIBUTION AND PHASE SEPARATION OF R-22 IN MULTI-MICROCHANNEL TUBES UNDER ADIABATIC CONDITION , 2004 .

[5]  R. Lockhart.  Proposed Correlation of Data for Isothermal Two-Phase, Two-Component Flow in Pipes , 1949 .

[6]  P. Hrnjak,et al.  Two-Phase Pressure Drop and Flow Regime of Refrigerants and Refrigerant -Oil Mixtures in Small Channels , 2007 .

[7]  Predrag Stojan Hrnjak,et al.  Two-Phase Flow Visualization of R134A in a Multiport Microchannel Tube , 2003 .

[8]  Man Wong,et al.  Phase change in microchannel heat sink under forced convection boiling , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[9]  R. Pease,et al.  High-performance heat sinking for VLSI , 1981, IEEE Electron Device Letters.

[10]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .

[11]  A. E. Bergles,et al.  Evolution of cooling technology for electrical, electronic, and microelectronic equipment , 2003 .

[12]  S. Zivi.  Estimation of Steady-State Steam Void-Fraction by Means of the Principle of Minimum Entropy Production , 1964 .

[13]  Satish G. Kandlikar,et al.  Single-Phase Liquid Friction Factors in Microchannels , 2006 .

[14]  Satish G. Kandlikar,et al.  Fundamental issues related to flow boiling in minichannels and microchannels , 2002 .

[15]  I. Mudawar,et al.  Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part II—heat transfer characteristics , 2005 .

[16]  T. Hibiki,et al.  Some characteristics of air-water two-phase flow in small diameter vertical tubes , 1996 .

[17]  Ibrahim Hassan,et al.  Characteristics of Flow Boiling Oscillations in Silicon Microchannel Heat Sinks , 2007 .

[18]  A. London,et al.  Compact heat exchangers , 1960 .

[19]  Satish G. Kandlikar,et al.  Two-phase flow patterns, pressure drop and heat transfer during boiling in minichannel and microchannel flow passages of compact evaporators , 2001 .

[20]  P. Hrnjak,et al.  Flow and Heat Transfer in Microchannels 30 to 300 Microns in Hydraulic Diameter , 2004 .

[21]  S. Garimella,et al.  Measurements and High-Speed Visualizations of Flow Boiling of a Dielectric Fluid in a Silicon Microchannel Heat Sink † , 2006 .

[22]  John R. Thome,et al.  A new type of diabatic flow pattern map for boiling heat transfer in microchannels , 2007 .

[23]  S. Kandlikar,et al.  Experimental Study of Flow Patterns, Pressure Drop, and Flow Instabilities in Parallel Rectangular Minichannels , 2005 .

[24]  Y. Zohar,et al.  Forced convection boiling in a microchannel heat sink , 2001 .

[25]  Man Wong,et al.  Size and shape effects on two-phase flow patterns in microchannel forced convection boiling , 2003 .

[26]  I. Mudawar,et al.  Measurement and prediction of pressure drop in two-phase micro-channel heat sinks , 2003 .

[27]  H. Lee,et al.  Pressure drop correlations for two-phase flow within horizontal rectangular channels with small heights , 2001 .