High purity isolation and quantification of semiconducting carbon nanotubes via column chromatography.

The isolation of semiconducting carbon nanotubes (CNTs) to ultrahigh (ppb) purity is a prerequisite for their integration into high-performance electronic devices. Here, a method employing column chromatography is used to isolate semiconducting nanotubes to 99.9% purity. The study finds that by modifying the solution preparation step, both the metallic and semiconducting fraction are resolved and elute using a single surfactant system, allowing for multiple iterations. Iterative processing enables a far more rapid path to achieving the level of purities needed for high performance computing. After a single iteration, the metallic peak in the absorption spectra is completely attenuated. Although absorption spectroscopy is typically used to characterize CNT purity, it is found to be insufficient in quantifying solutions of high purity (>98 to 99%) due to low signal-to-noise in the metallic region of ultrahigh purity solutions. Therefore, a high throughput electrical testing method was developed to quantify the degree of separation by characterizing ∼4000 field-effect transistors fabricated from the separated nanotubes after multiple iterations of the process. The separation and characterization methods described here provide a path to produce the ultrahigh purity semiconducting CNT solutions needed for high performance electronics.

[1]  Zhenan Bao,et al.  Selective dispersion of high purity semiconducting single-walled carbon nanotubes with regioregular poly(3-alkylthiophene)s. , 2011, Nature communications.

[2]  M. Strano,et al.  Evidence for a two-step mechanism in electronically selective single-walled carbon nanotube reactions. , 2005, Journal of the American Chemical Society.

[3]  Zhihong Chen,et al.  Length scaling of carbon nanotube transistors. , 2010, Nature nanotechnology.

[4]  M. Ieong,et al.  Silicon Device Scaling to the Sub-10-nm Regime , 2004, Science.

[5]  R. Service,et al.  Is Silicon's Reign Nearing Its End? , 2009, Science.

[6]  Davood Shahrjerdi,et al.  Variability in carbon nanotube transistors: improving device-to-device consistency. , 2012, ACS nano.

[7]  Kirk J. Ziegler,et al.  A Mechanistic Study of the Selective Retention of SDS-Suspended Single-Wall Carbon Nanotubes on Agarose Gels , 2011 .

[8]  Mark C. Hersam,et al.  Sorting carbon nanotubes by electronic structure using density differentiation , 2006, Nature nanotechnology.

[9]  H. Kataura,et al.  Thermodynamic determination of the metal/semiconductor separation of carbon nanotubes using hydrogels. , 2012, ACS nano.

[10]  S. Wind,et al.  Field-modulated carrier transport in carbon nanotube transistors. , 2002, Physical review letters.

[11]  T. Mizutani,et al.  Length-sorted semiconducting carbon nanotubes for high-mobility thin film transistors , 2011 .

[12]  M. Dresselhaus,et al.  Structure-Based Carbon Nanotube Sorting by Sequence-Dependent DNA Assembly , 2003, Science.

[13]  H. Kataura,et al.  From metal/semiconductor separation to single‐chirality separation of single‐wall carbon nanotubes using gel , 2011 .

[14]  Phaedon Avouris,et al.  Carbon nanotube electronics and photonics , 2009 .

[15]  R. Krupke,et al.  Separation of Metallic from Semiconducting Single-Walled Carbon Nanotubes , 2003, Science.

[16]  S. Reich,et al.  Selective bundling of zigzag single-walled carbon nanotubes. , 2011, ACS nano.

[17]  H. Kataura,et al.  Cover Picture: From metal/semiconductor separation to single‐chirality separation of single‐wall carbon nanotubes using gel (Phys. Status Solidi RRL 9/2011) , 2011 .

[18]  H. Lee,et al.  Highly effective separation of semiconducting carbon nanotubes verified via short-channel devices fabricated using dip-pen nanolithography. , 2012, ACS nano.

[19]  Phaedon Avouris,et al.  The role of metal-nanotube contact in the performance of carbon nanotube field-effect transistors. , 2005, Nano letters.

[20]  M. Hersam.  Progress towards monodisperse single-walled carbon nanotubes. , 2008, Nature nanotechnology.

[21]  M. Lundstrom,et al.  Self-Aligned Ballistic Molecular Transistors and Electrically Parallel Nanotube Arrays , 2004, cond-mat/0406494.

[22]  Mark S. Lundstrom,et al.  Sub-10 nm carbon nanotube transistor , 2011, 2011 International Electron Devices Meeting.

[23]  F. Hennrich,et al.  Selective suspension in aqueous sodium dodecyl sulfate according to electronic structure type allows simple separation of metallic from semiconducting single-walled carbon nanotubes , 2009 .

[24]  H. Kataura,et al.  Large-scale single-chirality separation of single-wall carbon nanotubes by simple gel chromatography , 2011, Nature communications.