High sensitivity three-dimensional insulator-based dielectrophoresis.

Insulator-based dielectrophoresis (iDEP) is a very promising technique for sorting microparticles based on their electrical properties. The need for microfabricated electrode arrays is eliminated by using constrictions in a microchannel to induce large electric field gradients. In this work, micro-milling is used to build devices with three-dimensional features that exhibit very large constriction ratios. These three-dimensional insulator-based dielectrophoresis (3DiDEP) devices allow for trapping microparticles at average electric fields one order of magnitude lower than two-dimensional designs with the same footprint. Low voltage operation minimizes Joule heating effects that have limited previous systems, opening up the possibility for new biological applications of iDEP.

[1]  Chia-Fu Chou,et al.  Electrodeless dielectrophoresis of single- and double-stranded DNA. , 2002, Biophysical journal.

[2]  S. Martínez-Chapa,et al.  Prediction of trapping zones in an insulator-based dielectrophoretic device. , 2009, Lab on a chip.

[3]  B. Kirby,et al.  Continuous-flow particle separation by 3D Insulative dielectrophoresis using coherently shaped, dc-biased, ac electric fields. , 2007, Analytical chemistry.

[4]  Laurie Brown,et al.  Fabrication and characterization of poly(methylmethacrylate) microfluidic devices bonded using surface modifications and solvents. , 2006, Lab on a chip.

[5]  Yoon‐Kyoung Cho,et al.  Bacteria concentration using a membrane type insulator‐based dielectrophoresis in a plastic chip , 2009, Electrophoresis.

[6]  H. A. Pohl.  The Motion and Precipitation of Suspensoids in Divergent Electric Fields , 1951 .

[7]  E. Cummings,et al.  Insulator‐based dielectrophoresis for the selective concentration and separation of live bacteria in water , 2004, Electrophoresis.

[8]  G. Fiechtner,et al.  Dielectrophoretic manipulation of particles and cells using insulating ridges in faceted prism microchannels. , 2005, Analytical chemistry.

[9]  Myung-Suk Chun,et al.  Improvement of microchannel geometry subject to electrokinesis and dielectrophoresis using numerical simulations , 2008 .

[10]  E. Cummings,et al.  Dielectrophoretic concentration and separation of live and dead bacteria in an array of insulators. , 2004, Analytical chemistry.

[11]  Yuzhu Hu,et al.  Determination of EOF of PMMA microfluidic chip by indirect laser-induced fluorescence detection , 2006 .

[12]  Chia-Fu Chou,et al.  Enhancing DNA hybridization kinetics through constriction-based dielectrophoresis. , 2009, Lab on a chip.

[13]  Yolanda Fintschenko,et al.  Performance impact of dynamic surface coatings on polymeric insulator-based dielectrophoretic particle separators , 2008, Analytical and bioanalytical chemistry.

[14]  A. Singh,et al.  Dielectrophoresis in microchips containing arrays of insulating posts: theoretical and experimental results. , 2003, Analytical chemistry.

[15]  B. Kirby,et al.  Electrothermal flow effects in insulating (electrodeless) dielectrophoresis systems , 2010, Electrophoresis.