Ultrasound Transducers for Large-Scale Metrology: A Performance Analysis for Their Use by the MScMS

The Mobile Spatial coordinate Measuring System (MScMS) is a distributed wireless-sensor-network-based system used to perform dimensional measurements of large-scale objects. The system consists of a wireless mobile probe with ultrasonic (US) transceivers, the position of which is determined using a distributed constellation of US transceivers arranged around the measuring area. These US transceivers, which are known as Crickets, transmit US signals to each other and measure their time of flight (TOF) to determine the mutual distances. The MScMS is able to calculate the Cartesian coordinates of the object surface points touched by the wireless mobile probe. This paper aims to experimentally evaluate the performance of the US transducers on each of the MScMS Crickets. The experiments are designed and performed by means of a statistical factorial plan to identify the most important factors affecting the transducers' performance on TOF measurements. Particular attention is given to the error derived by the US signal attenuation and the method of US pulse detection. The results are analyzed in detail and fully interpreted. Finally, some considerations about possible actions to improve the MScMS measuring system are given.

[1]  Mike Hazas,et al.  A Novel Broadband Ultrasonic Location System , 2002, UbiComp.

[2]  J. F. Figueroa,et al.  A method for accurate detection of time of arrival: Analysis and design of an ultrasonic ranging system , 1992 .

[3]  Matt Welsh,et al.  Simulating the power consumption of large-scale sensor network applications , 2004, SenSys '04.

[4]  C. Fritsch,et al.  Digital signal processing techniques for high accuracy ultrasonic range measurements , 1991 .

[5]  David C. Moore,et al.  Robust distributed network localization with noisy range measurements , 2004, SenSys '04.

[6]  Fiorenzo Franceschini,et al.  A review of localization algorithms for distributed wireless sensor networks in manufacturing , 2009, Int. J. Comput. Integr. Manuf..

[7]  Enrique Barbieri,et al.  A method for short or long range time-of-flight measurements using phase-detection with an analog circuit , 2001, IEEE Trans. Instrum. Meas..

[8]  Minoru Toda,et al.  PVDF corrugated transducer for ultrasonic ranging sensor , 2007 .

[9]  Biao Cheng,et al.  Enhancing ultrasonic imaging with low transient pulse shaping , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[10]  Fiorenzo Franceschini,et al.  Mobile Spatial coordinate Measuring System (MScMS) – introduction to the system , 2007 .

[11]  Erik D. Demaine,et al.  Mobile-assisted localization in wireless sensor networks , 2005, Proceedings IEEE 24th Annual Joint Conference of the IEEE Computer and Communications Societies..

[12]  R.L. Moses,et al.  Locating the nodes: cooperative localization in wireless sensor networks , 2005, IEEE Signal Processing Magazine.

[13]  V. Mágori,et al.  Ultrasonic Presence Sensors with Wide Range and High Local Resolution , 1987, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[14]  G. Kino Acoustic waves : devices, imaging, and analog signal processing , 1987 .

[15]  Margaret J. Robertson,et al.  Design and Analysis of Experiments , 2006, Handbook of statistics.

[16]  Jerker Delsing,et al.  Ultra-low power transmit/receive ASIC for battery operated ultrasound measurement systems , 2006 .

[17]  M. Toda,et al.  Cylindrical PVDF film transmitters and receivers for air ultrasound , 2002, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[18]  Rymantas Kazys,et al.  Online Profiling of Nonplanar Objects by High-Resolution Air-Coupled Ultrasonic Distance Measurements , 2007, IEEE Transactions on Instrumentation and Measurement.

[19]  Nils Kroemer,et al.  Ultrasonic transducers and transducer arrays for applications in air , 1992 .

[20]  Jörg Kaiser,et al.  Improving the Accuracy of Ultrasound-Based Localisation Systems , 2005, LoCA.

[21]  John S. Lamancusa,et al.  Ranging errors caused by angular misalignment between ultrasonic transducer pairs , 1990 .

[22]  Ryoshu Furutani,et al.  Development of a new artifact for the calibration of large scale instruments , 2001 .

[23]  Fiorenzo Franceschini,et al.  THE PROBLEM OF DISTRIBUTED WIRELESS SENSORS POSITIONING IN THE MOBILE SPATIAL COORDINATE MEASURING SYSTEM (MSCMS) , 2008 .

[24]  Stephen Kyle,et al.  Large‐Scale Metrology , 2005 .

[25]  Hari Balakrishnan,et al.  6th ACM/IEEE International Conference on on Mobile Computing and Networking (ACM MOBICOM ’00) The Cricket Location-Support System , 2022 .

[26]  Jose L Pons,et al.  Estimating the 3D-position from time delay data of US-waves: experimental analysis and a new processing algorithm , 2002 .

[27]  G E Stelmach,et al.  An ultrasonic time-of-flight system for hand movement measurement. , 1995, Physiological measurement.

[28]  Fernando Figueroa,et al.  An automatic self-installation and calibration method for a 3D position sensing system using ultrasonics , 1999, Robotics Auton. Syst..

[29]  J. S. Hunter,et al.  Statistics for Experimenters: An Introduction to Design, Data Analysis, and Model Building. , 1979 .

[30]  Hari Balakrishnan,et al.  Lessons from Developing and Deploying the Cricket Indoor Location System , 2003 .

[31]  Fredrik Gustafsson,et al.  Positioning using time-difference of arrival measurements , 2003, 2003 IEEE International Conference on Acoustics, Speech, and Signal Processing, 2003. Proceedings. (ICASSP '03)..