Generalized Vector Model for the Brushless Doubly-Fed Machine With a Nested-Loop Rotor

This paper presents a generic vector model for the brushless doubly-fed machine (BDFM) with a nested-loop rotor. The vector model is presented for a generic p1/p2 pole-pair BDFM which may have any number of loops per nest. The vector transformations utilized in the derivation of the vector model are provided in general form such that the model can be represented in any appropriate reference frames according to the specific application of the model, such as BDFM analysis, simulations, or control system synthesis. The derived vector model benefits from the feature of reduced order in comparison with the coupled-circuit model, which is the most detailed model for the BDFM, while maintaining the accuracy by including the effects of all loops in each nest. The vector model is developed in MATLAB/Simulink based on the rotor reference frames for a 180-frame-size prototype BDFM, and its predictions for the machine performance have been compared with those of the coupled-circuit model as well as verified experimentally.

[1]  R. Krishnan,et al.  Electric Motor Drives: Modeling, Analysis, and Control , 2001 .

[2]  Renato Carlson,et al.  Grid synchronization of brushless doubly fed asynchronous generators in wind power systems , 2008 .

[3]  P. C. Roberts,et al.  Performance of the bdfm as a generator and motor , 2005 .

[4]  T.A. Lipo,et al.  Complex vector model of the squirrel cage induction machine including instantaneous rotor bar currents , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[5]  Ruqi Li,et al.  Two-axis model development of cage-rotor brushless doubly-fed machines , 1991 .

[6]  Shiyi Shao,et al.  Stator-Flux-Oriented Vector Control for Brushless Doubly Fed Induction Generator , 2009, IEEE Transactions on Industrial Electronics.

[7]  Alan K. Wallace,et al.  Investigation of appropriate pole number combinations for brushless doubly-fed machines applied to pump drives , 1994 .

[8]  Shiyi Shao,et al.  Stable Operation of the Brushless Doubly-Fed Machine (BDFM) , 2007, 2007 7th International Conference on Power Electronics and Drive Systems.

[9]  Mariusz Jagiela,et al.  The BDFM as a Generator in Wind Turbines , 2006, 2006 12th International Power Electronics and Motion Control Conference.

[10]  Shiyi Shao,et al.  Vector control of the Brushless Doubly-Fed Machine for wind power generation , 2008, 2008 IEEE International Conference on Sustainable Energy Technologies.

[11]  ガルシア アルフレード ロドルフォ ミュニョス,et al.  Dual stator winding induction machine drive , 1999 .

[12]  Javier Poza,et al.  Unified reference frame dq model of the brushless doubly fed machine , 2006 .

[13]  A. Wallace,et al.  Generalized Theory of the Brushless Doubly-Fed Machine. Part 1: Analysis , 1997 .

[14]  Ruqi Li,et al.  Dynamic simulation of brushless doubly-fed machines , 1991 .

[15]  Hashem Oraee,et al.  Synchronous operation control of the Brushless Doubly-Fed Machine , 2010, 2010 IEEE International Symposium on Industrial Electronics.

[16]  Javier Poza,et al.  Vector control design and experimental evaluation for the brushless doubly fed machine , 2009 .

[17]  H. Oraee,et al.  Derivation of a vector model for a Brushless Doubly-Fed Machine with multiple loops per nest , 2008, 2008 IEEE International Symposium on Industrial Electronics.

[18]  Peter Tavner,et al.  A Brushless Doubly Fed Machine for use in an Integrated Motor/Converter, Considering the Rotor Flux , 1988 .

[19]  Rene Spee,et al.  Synchronous frame model and decoupled control development for doubly-fed machines , 1994, Proceedings of 1994 Power Electronics Specialist Conference - PESC'94.

[20]  Alan K. Wallace,et al.  Synchronous drive performance of brushless doubly-fed motors , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.

[21]  H. Oraee,et al.  The Brushless Doubly-Fed Machine Vector Model in the rotor flux oriented reference frame , 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.

[22]  A. C. Ferreira,et al.  Generalised theory of the brushless doubly-fed machine , 1997 .