Acoustic evaluation of wood quality with a non-destructive method in standing trees: a first survey in Italy

Abstract: Research and development efforts are currently underway worldwide to examine the potential use of a wide range of non-destructive technologies (NDT) for evaluating wood and wood-based materials, from the assessment of standing trees to in-place structures. For this purpose, acoustic velocity by the Fakopp time of flight (TOF) tool was used to estimate the influence of four thinning treatments performed in Southern Italy. The objective of the study was to determine if the effects of silvicultural practices on wood quality can be identified using acoustic measurement to assess the MOEd of standing trees with non-destructive method in Calabrian pine (Pinus nigra Arnold subsp. calabrica). Four hundred and fifty standing trees from four sites were non-destructively tested using a time-of-flight acoustic wave technique. The thinning trials were conducted on 60-year-old plantations of Calabrian pine in four plots under different treatments: Control (T), light thinning (A), intermediate thinning (B) and heavy thinning (C). Statistical analysis demonstrated significant stress wave time differences between the stands with moderate thinning (A and B) and those with heavy thinning (C). The results showed that tree diameter has significant influence on acoustic wave measurements and a valid relationship exists between diameter at breast height and tree velocity. The results of these studies proved that the stress wave technique can be successfully applied on standing trees.

[1]  R. Lafortezza,et al.  Estimating belowground biomass and root/shoot ratio of Phillyrea latifolia L. in the Mediterranean forest landscapes , 2015, Annals of Forest Science.

[2]  Urban Bergsten,et al.  Influence of Silvicultural Regime on Wood Structure Characteristics and Mechanical Properties of Clear Wood in Pinus sylvestris , 2006 .

[3]  M. Reale,et al.  Using non-destructive testing to assess modulus of elasticity of Pinus sylvestris trees , 2009 .

[4]  R. Lafortezza,et al.  Root system investigation in sclerophyllous vegetation: an overview , 2013 .

[5]  Robert J. Ross,et al.  Stress wave sorting of red maple logs for structural quality , 2004, Wood Science and Technology.

[7]  R. Barbour,et al.  Evaluation of Small-Diameter Timber for Value-Added , 2004 .

[8]  E. Macdonald,et al.  A review of the effects of silviculture on timber quality of Sitka spruce , 2002 .

[9]  H. Lindström,et al.  Methods for measuring stiffness of young trees , 2002, Holz als Roh- und Werkstoff.

[10]  Simplified methods to inventory the current annual increment of forest standing volume , 2012 .

[11]  Giuseppe Zimbalatti,et al.  Cable logging opportunities for firewood in Calabrian forests. , 2009 .

[12]  Robert J. Ross,et al.  Acoustic assessment of wood quality of raw forest materials - A path to increased profitability , 2007 .

[13]  Robert C. Wolpert,et al.  A Review of the , 1985 .

[14]  A. Tsehaye,et al.  Sorting of logs using acoustics , 2000, Wood Science and Technology.

[15]  K. Entwistle,et al.  Differences in acoustic velocity by resonance and transit-time methods in an anisotropic laminated wood medium , 2005 .

[16]  G. Howe,et al.  Early genetic selection for wood stiffness in juvenile Douglas-fir and western hemlock , 2014 .

[17]  Xiping Wang.  Fundamentals of Acoustic Measurements on Trees and Logs and Their Implication to Field Application , 2011 .

[18]  Xiping Wang,et al.  Acoustic measurements on trees and logs: a review and analysis , 2013, Wood Science and Technology.

[19]  Michael S. Watt,et al.  Assessing corewood acoustic velocity and modulus of elasticity with two impact based instruments in 11-year-old trees from a clonal-spacing experiment of Pinus radiata D. Don , 2007 .

[20]  S. Zhang.  Effect of growth rate on wood specific gravity and selected mechanical properties in individual species from distinct wood categories , 1995, Wood Science and Technology.

[21]  N. Macchioni,et al.  Wood properties of young Douglas-fir in Southern Italy: results over a 12-year post-thinning period , 2011, European Journal of Forest Research.

[22]  Ahmed Koubaa,et al.  Phenotypic Correlations Between Juvenile-Mature Wood Density and Growth in Black Spruce , 2007 .

[23]  John C. F. Walker,et al.  Variations in acoustic velocity and density with age, and their interrelationships in radiata pine , 2006 .

[24]  Robert J. Ross,et al.  Nondestructive evaluation of standing trees with a stress wave method , 2007 .

[25]  Ahmed Elhasan Elfaki,et al.  ON NONDESTRUCTIVE TESTING , 2015 .

[26]  Yafang Yin,et al.  Nondestructive Testing and Evaluation of Wood: A Worldwide Research Update , 2009 .

[27]  Robert J. Ross,et al.  Acoustic Evaluation of Wood Quality in Standing Trees. Part I. Acoustic Wave Behavior , 2007 .

[28]  Giuseppe Zimbalatti,et al.  Firewood cable extraction in the southern Mediterranean area of Italy , 2016 .

[29]  K. Ikeda,et al.  Quality evaluation of standing trees by a stress-wave propagation method and its application, 2: Evaluation of sugi stands and application to production of sugi (Cryptomeria japonica D. Don) structural square sawn timber , 2000 .