Cooling Systems Based on Cold Compressed Air: A Review of the Applications in Machining Processes

Abstract The present work collects a review and analysis of the cooling systems based on cold compressed air along with the main works about the application of such type of systems in machining processes. From the analysis of such works, it is possible to conclude that the cold compressed air system is a real environmentally friendly alternative to the traditional lubrication/cooling systems since it can: reduce the friction and the temperature in the cutting zone, improve the surface finish of the pieces, reduce the cutting forces, increase the tool life, facilitate the chip breaking and its evacuation, and reduce production costs. Among cold compressed air systems, it is possible to remark those that use a vortex tube due to its numerous advantages and good results.

[1]  Vishal S. Sharma,et al.  Cooling techniques for improved productivity in turning , 2009 .

[2]  Denni Kurniawan,et al.  Cutting Force and Surface Roughness Characterization in Cryogenic High-Speed End Milling of Ti–6Al-4V ELI , 2014 .

[3]  M. Dargusch,et al.  Machining Ti–6Al–4V alloy with cryogenic compressed air cooling , 2010 .

[4]  Murat Kiyak,et al.  Comparison of gases applications to wet and dry cuttings in turning , 2004 .

[5]  Jie Liu,et al.  On temperatures and tool wear in machining hypereutectic Al–Si alloys with vortex-tube cooling , 2007 .

[6]  Diego Carou,et al.  Comparative analysis of sustainable cooling systems in intermittent turning of magnesium pieces , 2014 .

[7]  E. Ezugwu.  Key improvements in the machining of difficult-to-cut aerospace superalloys , 2005 .

[8]  J. Paulo Davim,et al.  A note on the use of the minimum quantity lubrication (MQL) system in turning , 2015 .

[9]  Z. M. Wang,et al.  Titanium alloys and their machinability—a review , 1997 .

[10]  Sakir Tasdemir,et al.  Experimental examination of the cooling performance of Ranque-Hilsch vortex tube on the cutting tool nose point of the turret lathe through infrared thermography method , 2011 .

[11]  B. Yalçın,et al.  The effects of various cooling strategies on surface roughness and tool wear during soft materials milling , 2009 .

[12]  C. H. Che-Haron,et al.  Tool life and surface integrity in turning titanium alloy , 2001 .

[13]  Vimal Dhokia,et al.  Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids , 2012 .

[14]  Ian M. Hutchings,et al.  Friction and lubrication effects in the machining of aluminium alloys , 1998 .

[15]  G. Byrne,et al.  Dynamics of chip formation during orthogonal cutting of titanium alloy Ti–6Al–4V , 2008 .

[16]  A. Jawaid,et al.  The effect of machining on surface integrity of titanium alloy Ti–6% Al–4% V , 2005 .

[17]  Asif Iqbal,et al.  Refrigerated cooling air cutting of difficult-to-cut materials , 2007 .

[18]  John W. Sutherland,et al.  Dry Machining and Minimum Quantity Lubrication , 2004 .

[19]  Gerry Byrne,et al.  Characterisation of chip formation during orthogonal cutting of titanium alloy Ti–6Al–4V , 2008 .

[20]  Álisson Rocha Machado,et al.  Evaluation of the performance of CBN tools when turning Ti-6Al-4V alloy with high pressure coolant supplies , 2005 .

[21]  Uday S. Dixit,et al.  A comparison of dry and air-cooled turning of grey cast iron with mixed oxide ceramic tool , 2007 .