Polymer-based graphene composite molding: a review

Polymer-based graphene composite products with high mechanical properties, heat resistance, corrosion resistance and electrical conductivity are obtained by different molding technologies. Although these processes conveniently realize the molding of polymer composites, it is often difficult to control the product quality because of the fluctuation of the temperature and pressure threshold. At the same time, a high temperature or external load will carbonize polymer composites or cause excessive porosity to influence the compacted density and electrical conductivity. In this review, additive manufacturing, injection molding, extrusion molding, hot pressing, spark plasma sintering, electromagnetic-assisted molding and other processing methods were introduced. Meanwhile, the powder molding mechanism and material constitutive model were introduced, providing appropriate molding methods and theoretical guidance based on the performance of raw materials and the performance requirements of products.

[1]  J. Górecki,et al.  Numerical Simulation of Dry Ice Compaction Process: Comparison of the Mohr–Coulomb Model with the Experimental Results , 2022, Materials.

[2]  Nengbing Long,et al.  Preparation and characterization of a novel 3D polymer support for the immobilization of cyclodextrin glucanotransferase and efficient biocatalytic synthesis of α-arbutin , 2022, Biochemical Engineering Journal.

[3]  H. Okamoto,et al.  Numerical simulation of plate-like particle orientation in injection molding , 2022, Powder Technology.

[4]  K. Naelapää,et al.  Predictive modelling of powder compaction for binary mixtures using the finite element method , 2022, Powder Technology.

[5]  Q. B. Wang,et al.  Mechanical performance of graphenex/poly(ether ketone ketone) composite sheets by hot pressing , 2022, Scientific reports.

[6]  Xuelian Wu,et al.  A Density-Dependent Modified Doraivelu Model for the Cold Compaction of Poly (Ether Ketone Ketone) Powders , 2022, Polymers.

[7]  D. Eskin,et al.  Microstructure and properties of a nanostructured W-31 wt% Cu composite produced by magnetic pulse compaction of bimetallic nanoparticles , 2022, International Journal of Refractory Metals and Hard Materials.

[8]  Hong Liu,et al.  Experimental research on moulding of graphene/PEKK composite powder by spark plasma sintering technology , 2022, Applied Physics A.

[9]  A. Kouzani,et al.  A review of size-dependent continuum mechanics models for micro- and nano-structures , 2022, Thin-Walled Structures.

[10]  D. N. Trivedi,et al.  Graphene and its application in thermoplastic polymers as nano-filler- A review , 2021, Polymer.

[11]  J. Grandidier,et al.  Characterization and modelling of the PEKK thermomechanical and creep behavior above the glass transition temperature , 2021, Mechanics of Materials.

[12]  R. B. Canto,et al.  Calibration of powder constitutive model using digital image correlation validated for hollow hemisphere of lead zirconate titanate , 2021 .

[13]  D. Ray,et al.  Crystallinity studies of PEKK and carbon fibre/PEKK composites: A review , 2021 .

[14]  Sai Che,et al.  A review of three-dimensional graphene networks for use in thermally conductive polymer composites: construction and applications , 2021, New Carbon Materials.

[15]  Cheng‐Te Lin,et al.  A mini review: application of graphene paper in thermal interface materials , 2021, New Carbon Materials.

[16]  Mingbo Wu,et al.  Recent progress in the use of graphene/polymer composites to remove oil contaminants from water , 2021, Carbon.

[17]  O. Adesina,et al.  Spark plasma sintering of polymer and polymer-based composites: a review , 2021, The International Journal of Advanced Manufacturing Technology.

[18]  Bo Zhou,et al.  Discrete element modeling of the compression molding of polymer–crystal composite particles , 2021 .

[19]  D. Ling,et al.  Numerical simulations of arbitrary evolving cracks in geotechnical structures using the nonlinear augmented finite element method (N-AFEM) , 2021 .

[20]  Xiaoru Li,et al.  Evolution of properties and enhancement mechanism of large-scale three-dimensional graphene oxide-carbon nanotube aerogel/polystyrene nanocomposites , 2021 .

[21]  Guangyao Li,et al.  Study on the compaction characteristics of CNTs/TC4 composites based on electromagnetic warm compaction , 2021 .

[22]  Gui-Wen Huang,et al.  Numerical simulation of magnetic pulse radial compaction of W-Cu20 powder with a field shaper , 2021, The International Journal of Advanced Manufacturing Technology.

[23]  Ming Cao,et al.  Investigation of Electromagnetic Pulse Compaction on Conducting Graphene/PEKK Composite Powder , 2021, Materials.

[24]  A. Elharfi,et al.  Polymer composite materials: A comprehensive review , 2021, Composite Structures.

[25]  M. K. Bakri,et al.  Applications of sustainable polymer composites in automobile and aerospace industry , 2021 .

[26]  J. Martínez-Esnaola,et al.  Study of Astroloy powder compaction at high temperature under hydrostatic load using finite elements , 2020 .

[27]  Huajun Sun,et al.  Establishment of constitutive models and numerical simulation of dry pressing and solid state sintering processes of MgTiO3 ceramic , 2020 .

[28]  Guangyao Li,et al.  Effect of aspect ratio on the compaction characteristics and micromorphology of copper powders by magnetic pulse compaction , 2020 .

[29]  A. Khoei,et al.  Compaction simulation of crystalline nano-powders under cold compaction process with molecular dynamics analysis , 2020 .

[30]  J. Covas,et al.  Taking advantage of the functional synergism between carbon nanotubes and graphene nanoplatelets to obtain polypropylene-based nanocomposites with enhanced oxidative resistance , 2020, European Polymer Journal.

[31]  Guangyao Li,et al.  Effect of Discharge Energy of Magnetic Pulse Compaction on the Powder Compaction Characteristics and Spring Back Behavior of Copper Compacts , 2020, Metals and Materials International.

[32]  Z. Tan,et al.  Deformation Damage Repair of Geotechnical Engineering Based on Elastic–Plastic Mechanics , 2019, Geotechnical and Geological Engineering.

[33]  Moses M Solomon,et al.  Protective polymeric films for industrial substrates: A critical review on past and recent applications with conducting polymers and polymer composites/nanocomposites , 2019, Progress in Materials Science.

[34]  Hyun‐Jung Choi,et al.  Electrical percolation threshold of carbon black in a polymer matrix and its application to antistatic fibre , 2019, Scientific Reports.

[35]  Aldenor G. Santos,et al.  Occurrence of the potent mutagens 2- nitrobenzanthrone and 3-nitrobenzanthrone in fine airborne particles , 2019, Scientific Reports.

[36]  B. Wetzel,et al.  Design and Synthesis of Polymer Nanocomposites , 2019, Polymer Composites with Functionalized Nanoparticles.

[37]  Abolfazl Darvizeh,et al.  Scaling of the powder compaction process , 2018, International Journal of Solids and Structures.

[38]  R. B. Canto,et al.  A validation procedure for numerical models of ceramic powder pressing , 2018, Journal of the European Ceramic Society.

[39]  K. Evans,et al.  A primary study into graphene/polyether ether ketone (PEEK) nanocomposite for laser sintering , 2018 .

[40]  D. Lin,et al.  A review on additive manufacturing of polymer-fiber composites , 2017 .

[41]  H. Diarra,et al.  Comparative study between Drucker-Prager/Cap and modified Cam-Clay models for the numerical simulation of die compaction of pharmaceutical powders , 2017 .

[42]  Hee‐Tae Jung,et al.  Grafting polycarbonate onto graphene nanosheets: synthesis and characterization of high performance polycarbonate–graphene nanocomposites for ESD/EMI applications , 2017 .

[43]  Hyoung-Seop Kim,et al.  Compaction behavior of water-atomized CoCrFeMnNi high-entropy alloy powders , 2017 .

[44]  S. Corbin,et al.  Analysis of compressibility behavior and development of a plastic yield model for uniaxial die compaction of sponge titanium powder , 2017 .

[45]  C. Broeckmann,et al.  A combined model to simulate the powder densification and shape changes during hot isostatic pressing , 2017 .

[46]  T. Maloney,et al.  General overview of graphene: Production, properties and application in polymer composites , 2017 .

[47]  Mengcheng Zhou,et al.  Experimental and numerical investigation of temperature evolution during electromagnetic pulsed compaction of powders , 2017 .

[48]  Mengcheng Zhou,et al.  A density-dependent modified Drucker-Prager Cap model for die compaction of Ag57.6-Cu22.4-Sn10-In10 mixed metal powders , 2017 .

[49]  Yehai Yan,et al.  High-performance and multifunctional epoxy composites filled with epoxide-functionalized graphene , 2016 .

[50]  M. A. Eremina,et al.  Effect of compaction method on the structure and properties of bulk Cu + Cr3C2 composites , 2016, The Physics of Metals and Metallography.

[51]  L. Fambri,et al.  Fused deposition modelling with ABS–graphene nanocomposites , 2016 .

[52]  B. Kim,et al.  Fabrication of Ag–SnO2 Contact Materials from Gas‐Atomized Ag–Sn Powder Using Combined Oxidation and Ball‐Milling Process , 2016 .

[53]  B. Rajaprakash,et al.  Numerical Simulation of Double Action Powder Compaction Process , 2016 .

[54]  S. Kim,et al.  Polyethylene/graphene nanocomposites: effect of molecular weight on mechanical, thermal, rheological and morphological properties , 2016, Colloid and Polymer Science.

[55]  G. Qin,et al.  Coherence property of mid-infrared supercontinuum generation in tapered chalcogenide fibers with different structures , 2016 .

[56]  Changyu Shen,et al.  Piezoresistive behavior of porous carbon nanotube-thermoplastic polyurethane conductive nanocomposites with ultrahigh compressibility , 2016 .

[57]  Liu Jun,et al.  Optimization of Quality of Stamping Die Manufactured by Metal Powder Shock Compaction via ABAQUS , 2016 .

[58]  Zhiming Guo,et al.  Global dynamics of a nonlocal population model with age structure in a bounded domain: A non-monotone case , 2015 .

[59]  G. Gao.  Forming equation about multivariate mixed metal powder by electromagnetic compaction , 2015 .

[60]  Huang Yuan,et al.  Continuum damage mechanics for sintered powder metals , 2015 .

[61]  A. Carradò,et al.  Optimization of the spark plasma sintering processing parameters affecting the properties of polyimide , 2014 .

[62]  Zhengu Chen,et al.  Design and preparation of graphene/poly(ether ether ketone) composites with excellent electrical conductivity , 2014, Journal of Materials Science.

[63]  Yusheng Shi,et al.  Numerical simulation of cold isostatic pressed alumina parts produced by selective laser sintering and part shape optimization , 2013 .

[64]  F. Yılmaz,et al.  Sliding wear resistance of fine Co powders compacted by the magnetic-pulsed compaction method , 2013 .

[65]  Amir R. Khoei,et al.  Genetic algorithm-based numerical optimization of powder compaction process with temperature-dependent cap plasticity model , 2013 .

[66]  K. Behdinan,et al.  Finite Element Analysis of Friction-Assisted Powder Compaction Process , 2012 .

[67]  V. Ivanov,et al.  Fabrication of an Yttria Thin-Wall Tube by Radial Magnetic Pulsed Compaction of Powder-Based Tapes , 2010 .

[68]  Yi Song,et al.  Improved Model and 3D Simulation of Densification Process for Iron Powder , 2010 .

[69]  Haiping Yu,et al.  Microstructure and mechanical properties of Ti6Al4V powder compacts prepared by magnetic pulse compaction , 2010 .

[70]  Tuhin Sinha,et al.  A study on the sensitivity of Drucker-Prager Cap model parameters during the decompression phase of powder compaction simulations , 2010 .

[71]  Amir R. Khoei,et al.  A new computational algorithm for 3D contact modeling of large plastic deformation in powder forming processes , 2009 .

[72]  D. Souriou,et al.  Influence of the formulation of an alumina powder on compaction , 2009 .

[73]  M. Yang,et al.  Effects of processing parameters on density and electric properties of electric ceramic compacted by low-voltage electromagnetic compaction , 2009 .

[74]  J. Kysar,et al.  Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene , 2008, Science.

[75]  Amir R. Khoei,et al.  Modeling of large deformation frictional contact in powder compaction processes , 2008 .

[76]  B. Azhdar,et al.  Polymer–nanofiller prepared by high‐energy ball milling and high velocity cold compaction , 2008 .

[77]  C. N. Lau,et al.  Superior thermal conductivity of single-layer graphene. , 2008, Nano letters.

[78]  G. Fudenberg,et al.  Ultrahigh electron mobility in suspended graphene , 2008, 0802.2389.

[79]  A. Taranov,et al.  Transparent Y2O3:Nd3+ ceramics produced from nanopowders by magnetic pulse compaction and sintering , 2007 .

[80]  Amir R. Khoei,et al.  Computational modeling of 3D powder compaction processes , 2007 .

[81]  B. Azhdar,et al.  Determination of dynamic and sliding friction, and observation of stick-slip phenomenon on compacted polymer powders during high-velocity compaction , 2006 .

[82]  I. Daniel,et al.  Processing of expanded graphite reinforced polymer nanocomposites , 2006 .

[83]  Amir R. Khoei,et al.  3D computational modeling of powder compaction processes using a three-invariant hardening cap plasticity model , 2006 .

[84]  B. Azhdar,et al.  Development of a High-Velocity Compaction process for polymer powders , 2005 .

[85]  Y. Kotov,et al.  Fabrication of nanoceramic hin-wall tubes by magnetic pulsed compaction and thermal sintering , 2005 .

[86]  A. Bendada,et al.  A new infrared pyrometer for polymer temperature measurement during extrusion moulding , 2004 .

[87]  Didier Delaunay,et al.  Heat transfer with mechanically driven thermal contact resistance at the polymer–mold interface in injection molding of polymers , 2004 .

[88]  Christophe L. Martin,et al.  Study of the cold compaction of composite powders by the discrete element method , 2003 .

[89]  W. Xia,et al.  Densification model for porous metallic powder materials , 2002 .

[90]  Roland W. Lewis,et al.  Powder compaction modelling via the discrete and finite element method , 2000 .

[91]  Ki-tae Kim,et al.  Simulation of Cold Compaction Densification Behavior of Silicon Nitride Ceramic Powder , 1998 .

[92]  S. Li,et al.  New compaction equation for powder materials , 1994 .

[93]  M. Tokita.  Trends in Advanced SPS Spark Plasma Sintering Systems and Technology , 1993 .

[94]  S. M. Doraivelu,et al.  A new yield function for compressible PM materials , 1984 .

[95]  P. A. Cundall,et al.  Discussion: A discrete numerical model for granular assemblies , 1980 .

[96]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[97]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[98]  Susumu Shima,et al.  Plasticity theory for porous metals , 1976 .

[99]  R. J. Green,et al.  A plasticity theory for porous solids , 1972 .

[100]  F. C. Thompson,et al.  Principles of Powder Metallurgy , 1944, Nature.