A nonlinear acoustic technique for crack detection in metallic structures

A crack detection technique based on nonlinear acoustics is developed in this study. Acoustic waves at a chosen frequency are generated using an actuating lead zirconate titanate (PZT) transducer, and they travel through the target structure before being received by a sensing PZT wafer. Unlike an undamaged medium, a cracked medium exhibits high acoustic nonlinearity which is manifested as harmonics in the power spectrum of the received signal. Experimental results also indicate that the harmonic components increase non-linearly in magnitude with increasing amplitude of the input signal. The proposed technique identifies the presence of cracks by looking at the two aforementioned features: harmonics and their nonlinear relationship to the input amplitude. The effectiveness of the technique has been tested on aluminum and steel specimens. The behavior of these nonlinear features as crack propagates in the steel beam has also been studied.

[1]  V. Giurgiutiu.  Tuned Lamb Wave Excitation and Detection with Piezoelectric Wafer Active Sensors for Structural Health Monitoring , 2005 .

[2]  Stephen R. Brown,et al.  Closure of random elastic surfaces in contact , 1985 .

[3]  P. Wilcox,et al.  Global crack detection using bispectral analysis , 2006, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[4]  S. Rokhlin,et al.  On the relationship between ultrasonic and micromechanical properties of contacting rough surfaces , 2002 .

[5]  Hoon Sohn,et al.  Searching for a reference-free damage detection technique , 2005 .

[6]  C. Pecorari.  Nonlinear interaction of plane ultrasonic waves with an interface between rough surfaces in contact. , 2003, The Journal of the Acoustical Society of America.

[7]  J. Greenwood,et al.  Contact of nominally flat surfaces , 1966, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[8]  G. Busse,et al.  CAN: an example of nonclassical acoustic nonlinearity in solids. , 2002, Ultrasonics.

[9]  A. Rivola,et al.  COMPARISON BETWEEN SECOND AND HIGHER ORDER SPECTRAL ANALYSIS IN DETECTING STRUCTURAL DAMAGES , 2022 .

[10]  W. Staszewski,et al.  Nonlinear acoustics with low-profile piezoceramic excitation for crack detection in metallic structures , 2006 .

[11]  I. Solodov,et al.  Instability, chaos, and "memory" in acoustic-wave-crack interaction. , 2001, Physical review letters.

[12]  Alexander Sutin,et al.  Nonlinear acoustic interaction on contact interfaces and its use for nondestructive testing , 2001 .

[13]  Wieslaw J. Staszewski,et al.  Structural Health Monitoring Using Guided Ultrasonic Waves , 2004 .

[14]  J. Rose.  Ultrasonic Waves in Solid Media , 1999 .

[15]  Otto Buck,et al.  Acoustic harmonic generation due to fatigue damage in high‐strength aluminum , 1979 .

[16]  A. G. Roosenbrand,et al.  The reflection of the fundamental torsional mode from cracks and notches in pipes. , 2003, The Journal of the Acoustical Society of America.

[17]  Alexander Sutin,et al.  Vibro-Acoustic Modulation Nondestructive Evaluation Technique , 1998, Smart Structures.

[18]  Robert E. Green,et al.  Ultrasonic investigation of mechanical properties , 1973 .

[19]  Tribikram Kundu,et al.  Ultrasonic Nondestructive Evaluation : Engineering and Biological Material Characterization , 2003 .

[20]  W. L. Morris,et al.  Acoustic harmonic generation at unbonded interfaces and fatigue cracks , 1978 .

[21]  J. Richardson,et al.  Harmonic generation at an unbonded interface—I. Planar interface between semi-infinite elastic media , 1979 .

[22]  Hoon Sohn,et al.  Instantaneous reference-free crack detection based on polarization characteristics of piezoelectric materials , 2007 .