Retention of fission product caesium in ZrC-coated fuel particles for high-temperature gas-cooled reactors

Abstract The ZrC coating layer is a candidate to replace the SiC coating layer of the Triso-coated fuel particle for high-temperature gas-cooled reactors. To understand mechanisms of the good retention capabilities for fission product caesium of the ZrC Triso-coated fuel particles, the particles after post-irradiation heating tests were examined individually with X-ray microradiography and the caesium inventories of the fuel kernel and coating layers of each particle were measured with gamma-ray spectrometry. The fractional content of 137Cs in the fuel kernel was found to be different from particle to particle though 137Cs was not released from the particles practically. The particles, which showed relatively good retention of 137Cs in the fuel kernels, had radially broken inner pyrolytic carbon layers and deformed fuel kernels. The ZrC layer developed the caesium retention capabilities of the fuel kernel through interaction of ZrC with the fuel kernel.

[1]  R. E. Bullock,et al.  Performance of coated UO2 particles gettered with ZrC , 1983 .

[2]  J. Kaae,et al.  Irradiation behavior of experimental fuel particles containing chemically vapor deposited zirconium carbide coatings , 1976 .

[3]  P. Wagner.  High-temperature fuel technology for nuclear process heat: ZrC-containing coated particle fuels and high-density graphite fuel matrices , 1977 .

[4]  D. T. Goodin.  Accident Condition Performance of Fuels for High‐Temperature Gas‐Cooled Reactors , 1982 .

[5]  K. Ikawa,et al.  High-temperature heating experiments on unirradiated ZrC-coated fuel particles , 1981 .

[6]  Toru Ogawa,et al.  Performance of ZrC-Coated Particle Fuel in Irradiation and Postirradiation Heating Tests , 1992 .

[7]  K. Minato,et al.  Deterioration of ZrC-coated fuel particle caused by failure of pyrolytic carbon layer , 1998 .

[8]  Kazuo Minato,et al.  Fission product release from ZrC-coated fuel particles during post-irradiation heating at 1800 and 2000°C , 1997 .

[9]  H. Nabielek,et al.  The Performance of High-Temperature Reactor Fuel Particles at Extreme Temperatures , 1989 .

[10]  Richard B. Firestone,et al.  Table of Isotopes , 1978 .

[11]  K. Ikawa,et al.  Chemical vapor deposition of ZrC within a spouted bed by bromide process , 1981 .

[12]  T. Ogawa,et al.  Fission product release from ZrC-coated fuel particles during postirradiation heating at 1600°C , 1995 .

[13]  Kazuo Minato,et al.  Fission product behavior in Triso-coated UO2 fuel particles , 1994 .