An inverse experimental approach to quantify the temporal release rate of unknown remote aerosol sources

HAL is a multi-disciplinary open access archive for the deposit and dissemination of scientific research documents, whether they are published or not. The documents may come from teaching and research institutions in France or abroad, or from public or private research centers. L’archive ouverte pluridisciplinaire HAL, est destinée au dépôt et à la diffusion de documents scientifiques de niveau recherche, publiés ou non, émanant des établissements d’enseignement et de recherche français ou étrangers, des laboratoires publics ou privés. An inverse experimental approach to quantify the temporal release rate of unknown remote aerosol sources F Chata, Emmanuel Belut, Denis Maillet, F Keller, A. Taniere

[1]  D. Maillet,et al.  Estimation of an aerosol source in forced ventilation through prior identification of a convolutive model , 2017 .

[2]  F Chata,et al.  Particulate pollutant source evaluation using an inverse method under steady-state conditions , 2016, Journal of occupational and environmental hygiene.

[3]  Xianting Li,et al.  Fast Identification of Multiple Indoor Constant Contaminant Sources by Ideal Sensors: A Theoretical Model and Numerical Validation , 2013 .

[4]  Shugang Wang,et al.  An inverse method based on CFD to quantify the temporal release rate of a continuously released pollutant source , 2013 .

[5]  Piyush M. Tagade,et al.  A Gaussian process emulator approach for rapid contaminant characterization with an integrated multizone-CFD model , 2013, 1305.2565.

[6]  E. Rank,et al.  History source identification of airborne pollutant dispersions in a slot ventilated building enclosure , 2013 .

[7]  Shugang Wang,et al.  Inversely tracking indoor airborne particles to locate their release sources , 2012 .

[8]  Di Liu,et al.  History recovery and source identification of multiple gaseous contaminants releasing with thermal effects in an indoor environment , 2012 .

[9]  Fariborz Haghighat,et al.  Contaminant source identification within a building: Toward design of immune buildings , 2011, Building and Environment.

[10]  O. Simonin,et al.  Improved CFD transport and boundary conditions models for low-inertia particles , 2011 .

[11]  Jelena Srebric,et al.  Real-Time Identification of Indoor Pollutant Source Positions Based on Neural Network Locator of Contaminant Sources and Optimized Sensor Networks , 2010, Journal of the Air & Waste Management Association.

[12]  Zhiqiang John Zhai,et al.  Prompt tracking of indoor airborne contaminant source location with probability-based inverse multi-zone modeling , 2009 .

[13]  H. A. Vielmo,et al.  Inverse design involving combined radiative and turbulent convective heat transfer , 2008 .

[14]  Denis Maillet,et al.  Estimation of time-varying pollutant emission rates in a ventilated enclosure: inversion of a reduced model obtained by experimental application of the modal identification method , 2008 .

[15]  X Liu,et al.  Inverse modeling methods for indoor airborne pollutant tracking: literature review and fundamentals. , 2007, Indoor air.

[16]  Q. Chen,et al.  Identification of contaminant sources in enclosed environments by inverse CFD modeling. , 2007, Indoor air.

[17]  R Braconnier,et al.  A numerical method of reconstructing the pollutant concentration field in a ventilated room. , 2007, The Annals of occupational hygiene.

[18]  M. Bocquet,et al.  Inverse modelling-based reconstruction of the Chernobyl source term available for long-range transport , 2007 .

[19]  A. Lai,et al.  Modeling particle distribution and deposition in indoor environments with a new drift–flux model , 2006 .

[20]  Michael D. Sohn,et al.  Evaluating sensor characteristics for real-time monitoring of high-risk indoor contaminant releases , 2006 .

[21]  Kyle J. Daun,et al.  Inverse design methods for radiative transfer systems , 2005 .

[22]  J.-P. Issartel,et al.  Inverse transport for the verification of the Comprehensive Nuclear Test Ban Treaty , 2003 .

[23]  M. Sohn,et al.  Rapidly Locating and Characterizing Pollutant Releases in Buildings , 2000, Journal of the Air & Waste Management Association.

[24]  Ofodike A. Ezekoye,et al.  Comparison of three regularized solution techniques in a three-dimensional inverse radiation problem , 2002 .

[25]  R. Neupauer,et al.  Adjoint‐derived location and travel time probabilities for a multidimensional groundwater system , 2001 .

[26]  A. Bagtzoglou,et al.  State of the Art Report on Mathematical Methods for Groundwater Pollution Source Identification , 2001 .

[27]  Alvin C.K. Lai,et al.  Modeling Indoor Particle Deposition from Turbulent Flow onto Smooth Surfaces , 2000 .

[28]  Janusz A. Pudykiewicz,et al.  APPLICATION OF ADJOINT TRACER TRANSPORT EQUATIONS FOR EVALUATING SOURCE PARAMETERS , 1998 .

[29]  B. Blackwell,et al.  Comparison of some inverse heat conduction methods using experimental data , 1996 .

[30]  B. Blackwell,et al.  Inverse Heat Conduction: Ill-Posed Problems , 1985 .

[31]  Robert M. Koerner,et al.  Groundwater pollution source identification from limited monitoring well data: Part 1 — Theory and feasibility , 1983 .

[32]  Richard L. Cooley,et al.  A method of estimating parameters and assessing reliability for models of steady state groundwater flow: 1. Theory and numerical properties , 1977 .