High efficient interleaved input-series-output-parallel-connected DC/DC converter for photovoltaic power conditioning system

In this paper, a novel topology is proposed for an input-series and output-parallel connected DC/DC converter, which consists of two DC/DC converter modules connected in series at the input and in parallel at the output, is an attractive solution for the photovoltaic system application. The proposed topology employ interleaving between two basic DC/DC modules which can be reduce inductor filter size and ratings. Also it shows that dramatically enhances the energy efficiency from low load to high load condition by reducing the required power level for DC/DC converter by one-third of conventional DC/DC converter. A case of 3.6kW prototype as the PV DC/DC converter is introduced to experimentally verify the proposed topology.

[1]  Milan M. Jovanovic,et al.  A new ZVS-PWM full-bridge converter , 2002, 24th Annual International Telecommunications Energy Conference.

[2]  Jung-Won Kim,et al.  Modeling, control, and design of input-series-output-parallel-connected converter for high-speed-train power system , 2001, IEEE Trans. Ind. Electron..

[3]  R. Ayyanar,et al.  Active input-voltage and load-current sharing in input-series and output-parallel connected modular DC-DC converters using dynamic input-voltage reference scheme , 2004, IEEE Transactions on Power Electronics.

[4]  Ji-Yoon Yoo,et al.  A Novel Topology for Photovoltaic DC/DC Full-Bridge Converter With Flat Efficiency Under Wide PV Module Voltage and Load Range , 2008, IEEE Transactions on Industrial Electronics.

[5]  Hirofumi Matsuo,et al.  Novel Solar-Cell Power Supply System Using a Multiple-Input DC-DC Converter , 2006, IEEE Trans. Ind. Electron..

[6]  Pedro Ibañez,et al.  Intelligent PV Module for Grid-Connected PV Systems , 2006, IEEE Transactions on Industrial Electronics.

[7]  Weidong Xiao,et al.  Topology Study of Photovoltaic Interface for Maximum Power Point Tracking , 2007, IEEE Transactions on Industrial Electronics.

[8]  Youhao Xi,et al.  Analysis and design considerations of a load and line independent zero voltage switching full bridge DC/DC converter topology , 2002 .

[9]  Ken Nagasaka,et al.  A Novel Microcontroller for Grid-Connected Photovoltaic Systems , 2006, IEEE Transactions on Industrial Electronics.

[10]  Tae-Jin Kim,et al.  A New Topology for Grid-Connected Photovoltaic System Using the Converter with Flat Efficiency Curve for All Load Range , 2007, 2007 IEEE Power Electronics Specialists Conference.