Numerical Investigation of Effect of Parameters on Hovering Efficiency of an Annular Lift Fan Aircraft

The effects of various parameters on the hovering performance of an annular lift fan aircraft are investigated by using numerical scheme. The pitch angle, thickness, aspect ratio (chord length), number of blades, and radius of duct inlet lip are explored to optimize the figure of merit. The annular lift fan is also compared with a conventional circular lift fan of the same features with the same disc loading and similar geometry. The simulation results show that the pitch angle of 27°, the thickness of 4% chord length, the aspect ratio of 3.5~4.0, 32 blades, and the radius of inlet lip of 4.7% generate the maximum figure of merit of 0.733. The optimized configuration can be used for further studies of the annular lift fan aircraft.

[1]  J. H. Diedrich.  Summary of model VTOL lift fan tests conducted at NASA Lewis Research Center , 1975 .

[2]  J. Carmeliet,et al.  CFD simulations of the aerodynamic drag of two drafting cyclists , 2013 .

[3]  Tao Huang,et al.  CFD Study of an Annular-Ducted Fan Lift System for VTOL Aircraft , 2015 .

[4]  Leonard Bridgeman,et al.  Jane's All the World's Aircraft , 1970 .

[5]  Christian Breitsamter,et al.  Numerical and Experimental Analysis of a Generic Fan-in-Wing Configuration , 2009 .

[6]  Zheng-Yin Ye,et al.  Numerical Study of Propeller Slipstream Based on Unstructured Dynamic Overset Grids , 2012 .

[7]  Farooq Saeed,et al.  Experimental and Numerical Investigation of 65 Degree Delta and 65=40 Degree Double-Delta Wings , 2006 .

[8]  Bo Zhang,et al.  Numerical Study of Transition of an Annular Lift Fan Aircraft , 2016 .

[9]  Klaus A. Hoffmann,et al.  Numerical Analysis of Effects of Leading-Edge Protuberances on Aircraft Wing Performance , 2012 .

[10]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[11]  J. Gordon Leishman,et al.  Principles of Helicopter Aerodynamics , 2000 .

[12]  Peiqing Liu,et al.  Numerical Study of Aerodynamics of a Wing-in-Ground-Effect Craft , 2014 .

[13]  Kyrilian G. Dyer.  Aerodynamic study of a small, ducted VTOL aerial vehicle , 2002 .

[14]  Jason Louie Pereira,et al.  Hover and wind-tunnel testing of shrouded rotors for improved micro air vehicle design , 2008 .

[15]  David H. Hickey,et al.  Survey of lift-fan aerodynamic technology , 1993 .

[16]  F. Menter.  ZONAL TWO EQUATION k-w TURBULENCE MODELS FOR AERODYNAMIC FLOWS , 1993 .

[17]  Cengiz Camci,et al.  Tip Clearance Investigation of a Ducted Fan Used in VTOL Unmanned Aerial Vehicles—Part II: Novel Treatments Via Computational Design and Their Experimental Verification , 2014 .

[18]  Cengiz Camci,et al.  Tip Clearance Investigation of a Ducted Fan Used in VTOL Unmanned Aerial Vehicles—Part I: Baseline Experiments and Computational Validation , 2014 .

[19]  Paul M. Bevilaqua,et al.  Genesis of the F-35 Joint Strike Fighter , 2009 .

[20]  Chinnapat Thipyopas,et al.  Experimental and Computational Evaluation of Small Microcoaxial Rotor in Hover , 2011 .

[21]  F. J. Asmus.  DESIGN AND DEVELOPMENT OF THE TIP TURBINE LIFT FAN , 1963 .

[22]  Ernesto Benini,et al.  Numerical Assessment of Pneumatic Devices on the Wing/Fuselage Junction of a Tiltrotor , 2013 .