Al-doped zinc oxide films deposited by simultaneous rf and dc excitation of a magnetron plasma: Relationships between plasma parameters and structural and electrical film properties
暂无分享,去创建一个
[1] G. Stoney. The Tension of Metallic Films Deposited by Electrolysis , 1909 .
[2] L. Alexander,et al. X-Ray diffraction procedures for polycrystalline and amorphous materials , 1974 .
[3] H. Werner,et al. Molecular versus atomic secondary ion emission from solids , 1978 .
[4] J. Vossen,et al. Thin Film Processes , 1979 .
[5] D. W. Hoffman,et al. Compressive stress and inert gas in Mo films sputtered from a cylindrical‐post magnetron with Ne, Ar, Kr, and Xe , 1980 .
[6] M. Seah,et al. Pure element sputtering yields using 500–1000 eV argon ions , 1981 .
[7] L. Holland,et al. The dependence of deposition rate on power input for dc and rf magnetron sputtering , 1981 .
[8] H. Nanto,et al. Optical Properties of Aluminum Doped Zinc Oxide Thin Films Prepared by RF Magnetron Sputtering , 1985 .
[9] K. Müller. Modelling ion-assisted deposition of CeO2 films , 1986 .
[10] Müller,et al. Ion-beam-induced epitaxial vapor-phase growth: A molecular-dynamics study. , 1987, Physical review. B, Condensed matter.
[11] K. Tominaga,et al. Radiation Effect due to Energetic Oxygen Atoms on Conductive Al-Doped ZnO Films , 1988 .
[12] I. Hamberg,et al. Optical properties of sputter-deposited ZnO:Al thin films , 1988 .
[13] R. Rosenberg,et al. Analytical Techniques for Thin Films , 1988 .
[14] D. W. Hoffman,et al. Stress-related effects in thin films , 1989 .
[15] M. Kushner,et al. Cylindrical magnetron discharges. II. The formation of dc bias in rf‐driven discharge sources , 1989 .
[16] M. Kushner,et al. Cylindrical magnetron discharges. I. Current‐voltage characteristics for dc‐ and rf‐driven discharge sources , 1989 .
[17] J. Tsao. Ion beam assisted film growth: Vol. 3: Beam modification of materials series edited by Tadatsugu Itoh (Elsevier, Amsterdam, 1989) pp. xviii + 440, $147.25/Dfl. 280.00, ISBN 0-444-87280-9 , 1989 .
[18] Ranga Komanduri,et al. Handbook of Ion Beam Processing Technology: Principles, Deposition, Film Modification and Synthesis , 1990 .
[19] G. Harding,et al. Aluminium- and indium-doped zinc oxide thin films prepared by DC magnetron reactive sputtering , 1991 .
[20] Hirotoshi Sato,et al. Highly conductive and transparent ZnO:Al thin films prepared on high-temperature substrates by d.c. magnetron sputtering , 1992 .
[21] H. Osten,et al. Suppressing of island formation in surfactant‐controlled solid phase epitaxy of germanium on Si(100) , 1992 .
[22] I. Petrov,et al. Polycrystalline TiN films deposited by reactive bias magnetron sputtering: Effects of ion bombardment on resputtering rates, film composition, and microstructure , 1992 .
[23] I. Petrov,et al. Average energy deposited per atom : a universal parameter for describing ion-assisted film growth ? , 1993 .
[24] R. Scheer,et al. CuInS2 based thin film solar cell with 10.2% efficiency , 1993 .
[25] C. Roland,et al. Applications of molecular dynamics methods to low energy ion beams and film deposition processes , 1994 .
[26] K. Ellmer,et al. Influence of discharge parameters on the layer properties of reactive magnetron sputtered ZnO:Al films , 1994 .
[27] I. Petrov,et al. High‐flux low‐energy (≂20 eV) N+2 ion irradiation during TiN deposition by reactive magnetron sputtering: Effects on microstructure and preferred orientation , 1995 .
[28] R. Wendt,et al. Thermal power at a substrate during ZnO:Al thin film deposition in a planar magnetron sputtering system , 1997 .
[29] Kun Ho Kim,et al. Structural, electrical and optical properties of aluminum doped zinc oxide films prepared by radio frequency magnetron sputtering , 1997 .