Numerical studies of methane catalytic combustion inside a monolith honeycomb reactor using multi-step surface reactions

Abstract The heterogeneous oxidation of methane-air mixture in a honeycomb catalytic reactor is investigated numerically in the present study. An improved multi-step surface reaction mechanism for methane oxidation on platinum is proposed so that surface ignition of lean methane-air mixtures is better modeled. First, this surface mechanism is used to determine the apparent activation energy of methane-air catalytic combustion. The predicted activation energies are found to agree well with the experimental data by Trimm and Lam (1980) and by Griffin and Pfefferle (1990). The chemical model indicates that, depending on the surface temperature, the surface reaction rate is dominated by either the oxygen desorption rate or by the methane adsorption rate. Second, the surface chemistry model is used to model a methane-air catalytic reactor with a two-dimensional flow code. The substrate surface temperatures are solved directly with a thermal boundary condition derived by balancing the energy fluxes at the gas-c...

[1]  L. Pfefferle,et al.  Gas phase and catalytic ignition of methane and ethane in air over platinum , 1990 .

[2]  Rutherford Aris,et al.  Bifurcation behavior in homogeneous-heterogeneous combustion: II. Computations for stagnation-point flow☆ , 1991 .

[3]  Mitchell D. Smooke,et al.  A computational study of methane-air combustion over heated catalytic and non-catalytic surfaces , 1993 .

[4]  L. Pfefferle,et al.  The Ignition of Methane/Ethane Boundary Layer Flows by Heated Catalytic Surfaces , 1989 .

[5]  R. Greif,et al.  A two-dimensional model of the chemical vapor deposition of silicon nitride in a low-pressure hot-wall reactor including multicomponent diffusion , 1994 .

[6]  Daniel A. Hickman,et al.  Steps in CH4 oxidation on Pt and Rh surfaces: High‐temperature reactor simulations , 1993 .

[7]  Robert J. Kee,et al.  CHEMKIN-III: A FORTRAN chemical kinetics package for the analysis of gas-phase chemical and plasma kinetics , 1996 .

[8]  Frank Behrendt,et al.  Modelling and simulation of heterogeneous oxidation of methane on a platinum foil , 1994 .

[9]  L. Pfefferle,et al.  The influence of catalytic activity on the ignition of boundary layer flows Part I: Hydroxyl radical measurements☆ , 1989 .

[10]  Robert J. Kee,et al.  A model of elementary chemistry and fluid mechanics in the combustion of hydrogen on platinum surfaces , 1994 .

[11]  David L. Trimm,et al.  The combustion of methane on platinum—alumina fibre catalysts—I: Kinetics and mechanism , 1980 .

[12]  Henning Bockhorn,et al.  NOx formation in lean premixed noncatalytic andcatalytically stabilized combustion of propane , 1994 .

[13]  Ulrich Maas,et al.  Simulation and sensitivity analysis of the heterogeneous oxidation of methane on a platinum foil , 1995 .

[14]  Tami C. Bond,et al.  Catalytic oxidation of natural gas over supported platinum: Flow reactor experiments and detailed numberical modeling , 1996 .

[15]  R. Greif,et al.  Unsteady three-dimensional mixed convection in a heated horizontal channel with applications to chemical vapor deposition , 1991 .

[16]  W. R. Williams,et al.  Bifurcation behavior in homogeneous-heterogeneous combustion: I. Experimental results over platinum☆ , 1991 .

[17]  Robert J. Kee,et al.  SURFACE CHEMKIN-III: A Fortran package for analyzing heterogeneous chemical kinetics at a solid-surface - gas-phase interface , 1996 .