A multi-modal-analysis-based simplified seismic design method for high-rise frame-steel plate shear wall dual structures

Abstract In this paper, a simplified seismic design method of high-rise frame-steel plate shear wall (SPSW) system was proposed based on the multi-modal-analysis under the framework of performance-based seismic design. The seismic response of high-rise SPSW system was simplified to first and multiple-modal equivalent single degree-of-freedom (SDOF) oscillators. The dual frame-SPSW structure was decomposed into a frame system and SPSW system by controlling the relative contribution of SPSW system, and they were correspondingly simplified to a series of F-SDOF oscillators and S-SDOF oscillators. The analytical models of F-SDOF and S-SDOF oscillators were developed using the modal pushover analysis. By assuming the system responding linearly elastic for higher modes, the equivalent SDOF oscillator (D-SDOF) for the frame-SPSW system was developed by combining the F-SDOF and S-SDOF oscillators in parallel for each mode of vibration. The design procedure was developed based on the comparison of displacement thresholds against the displacement demands derived using the SRSS combination. A 15-story frame-SPSW system was adopted to verify the feasibility and demonstrate the design process of the simplified method. The result also shows the seismic demands derived by the equivalent dual SDOF oscillators have good consistency with that by frame-SPSW structure.

[1]  Anil K. Chopra,et al.  A modal pushover analysis procedure to estimate seismic demands for unsymmetric‐plan buildings , 2004 .

[3]  Mervyn J. Kowalsky,et al.  Displacement-based seismic design of structures , 2007 .

[4]  Patricia M. Clayton,et al.  Strip model for steel plate shear walls with beam-connected web plates , 2017 .

[5]  Sumei Zhang,et al.  Hysteretic analysis of thin steel plate shear walls , 2013 .

[6]  Zhongxian Li,et al.  Cyclic behaviors of steel plate shear wall with self-centering energy dissipation braces , 2019, Journal of Constructional Steel Research.

[7]  Mohammad AlHamaydeh,et al.  Key parameters influencing the behavior of Steel Plate Shear Walls (SPSW) , 2017, 2017 7th International Conference on Modeling, Simulation, and Applied Optimization (ICMSAO).

[8]  Siddhartha Ghosh,et al.  Performance-based plastic design of steel plate shear walls , 2013 .

[9]  Keh-Chyuan Tsai,et al.  Seismic design and testing of the bottom vertical boundary elements in steel plate shear walls. Part 1: design methodology , 2014 .

[10]  Jian Zhang,et al.  Seismic design and behavior of low yield point steel plate shear walls , 2015 .

[11]  Guirong Yan,et al.  Hysteretic Analysis of Steel Plate Shear Walls (SPSWs) and a Modified Strip Model for SPSWs , 2012 .

[12]  J. Berman,et al.  PLASTIC ANALYSIS AND DESIGN OF STEEL PLATE SHEAR WALLS , 2003 .

[13]  Michel Bruneau,et al.  Capacity design of vertical boundary elements in steel plate shear walls , 2008 .

[14]  Anil K. Chopra,et al.  Evaluation of a Modified MPA Procedure Assuming Higher Modes as Elastic to Estimate Seismic Demands , 2004 .

[16]  Geoffrey L. Kulak,et al.  Analysis of steel plate shear walls , 1983 .

[17]  Anirudha Das,et al.  DESIGN OF STEEL PLATE SHEAR WALLS CONSIDERING INELASTIC DRIFT DEMAND , 2009 .

[18]  Jeffrey W. Berman,et al.  Seismic behavior of code designed steel plate shear walls , 2011 .

[19]  Enrique Hernández-Montes,et al.  AN ENERGY-BASED FORMULATION FOR FIRST-AND MULTIPLE-MODE NONLINEAR STATIC (PUSHOVER) ANALYSES , 2004 .

[20]  Michel Bruneau,et al.  Capacity Design of Intermediate Horizontal Boundary Elements of Steel Plate Shear Walls , 2010 .

[21]  Vitelmo V. Bertero,et al.  Earthquake Engineering: From Engineering Seismology To Performance-Based Engineering , 2020 .

[22]  Hassan Moghimi,et al.  Performance-Based Capacity Design of Steel Plate Shear Walls. I: Development Principles , 2014 .

[23]  Gordon P. Warn,et al.  Seismic Performance and Sensitivity of Floor Isolation Systems in Steel Plate Shear Wall Structures , 2012 .