WCIP method applied to modeling a modified rectangular metallic ring FSS for multiband applications

A modified rectangular metallic ring Frequency Selective Surface (FSS) with single layer for multiband applications is proposed in this article. By using the wave concept iterative process method WCIP, the resonant characteristics of the proposed FSS are derived. This structure is sensitive to polarization of the incident wave. The proposed FSSs elements are composed by development of a basic rectangular metallic ring FSS. The tuning of the ring dimensions allows the adjustment of the FSS resonant frequencies. The results found by the WCIP method and compared with those simulated by COMSOL Multiphysics software and a good agreement is recorded.

[1]  Junho Yeo,et al.  Compact Spatial Triple-Band-Stop Filter for Cellular/PCS/IMT-2000 Systems , 2008 .

[2]  Md. Abdul Matin,et al.  Analysis of Direction of Arrival Techniques Using Uniform Linear Array , 2012 .

[3]  Mohammed Titaouine,et al.  DUAL-BAND AND ENHANCED BAND FSS CHARACTERIZATION USING WCIP METHOD , 2010 .

[4]  Peter Quoc Cuong Ly.  Fast and unambiguous direction finding for digital radar intercept receivers. , 2013 .

[5]  K. Sarabandi,et al.  A Frequency Selective Surface With Miniaturized Elements , 2007, IEEE Transactions on Antennas and Propagation.

[6]  Henri Baudrand,et al.  Characterization of novel open notched quasi‐square metallic ring FSS using WCIP method for multiband applications , 2016 .

[7]  M. Kuzuoglu,et al.  Design of the Square Loop Frequency Selective Surfaces with Particle Swarm Optimization via the Equivalent Circuit Model , 2009 .

[8]  Long Li,et al.  Design and Synthesis of Multilayer Frequency Selective Surface Based on Antenna-Filter-Antenna Using Minkowski Fractal Structures , 2015, IEEE Transactions on Antennas and Propagation.

[9]  Henri Baudrand,et al.  Analysis of Frequency Selective Surface on Isotropic/Anisotropic Layers Using WCIP Method , 2007 .

[10]  L. Godara.  Application of antenna arrays to mobile communications. II. Beam-forming and direction-of-arrival considerations , 1997, Proc. IEEE.

[11]  Ling Li,et al.  The design and fabrication of planar multiband metallodielectric frequency selective surfaces for infrared applications , 2006, IEEE Transactions on Antennas and Propagation.

[12]  Henri Baudrand,et al.  Analysis of Shorted Ring Slots Frequency Selective Surfaces Using WCIP Method , 2008 .

[13]  Henri Baudrand,et al.  Electromagnetic Modeling of Quasi‐Square Open Metallic Ring Frequency Selective Surface Using Wave Concept Iterative Procedure , 2009 .

[14]  Henri Baudrand,et al.  Periodic Planar Multilayered Substrates Analysis Using Wave Concept Iterative Process , 2012 .

[15]  A. G. Neto,et al.  WCIP Method Applied to Active Frequency Selective Surfaces , 2007 .

[16]  F. Bayatpur.  Metamaterial-Inspired Frequency-Selective Surfaces. , 2009 .

[17]  Trabelsi Hichem,et al.  Analysis of Complex Electromagnetic Structures by Hybrid FDTD/WCIP Method , 2012 .

[18]  Jingcheng Zeng,et al.  Electromagnetic transmission characteristics of composite frequency selective surfaces coated with conductive polymer–silver paste , 2014 .

[19]  Yiqiang Yu,et al.  Introduction to Direction-Of-Arrival Estimation , 2010 .