Integration of a Thin Film PDMS-Based Capacitive Sensor for Tactile Sensing in an Electronic Skin

We present a capacitive force sensor based on a polydimethylsiloxane (PDMS) film integrated into a printed circuit board (PCB) on a flexible substrate whose layout is defined by inkjet printing. The influence of the dielectric thickness on the sensor behavior is presented. The thinner PDMS film of about 45 μm shows a sensitivity of up to 3 pF/N but poorer dynamic response. The dielectrics with thicknesses above 200 μm show a significantly reduced sensitivity. The best compromise between sensitivity and dynamic response is found for PDMS film of about 100 μm, showing about 1.1 pF/N and less than 15 s of recovery time. This film is integrated into a flexible PCBS including a microcontroller capable of evaluating the sensor. Interconnects of the circuit are defined by silver nanoparticles deposited by inkjet printing. The working principle of the circuit is demonstrated, proving that this simple approach can be used for artificial skin applications.

[1]  Yasuo Kuniyoshi,et al.  Wearable motion capture suit with full-body tactile sensors , 2009, 2009 IEEE International Conference on Robotics and Automation.

[2]  Zhenan Bao,et al.  Skin-inspired electronic devices , 2014 .

[3]  Gerard C. M. Meijer,et al.  A low-cost, smart capacitive position sensor , 1992 .

[4]  Quanfang Chen,et al.  Thickness-dependent mechanical properties of polydimethylsiloxane membranes , 2009 .

[5]  Benjamin C. K. Tee,et al.  Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers. , 2010, Nature materials.

[6]  B. B. Narakathu,et al.  A novel fully printed and flexible capacitive pressure sensor , 2012, 2012 IEEE Sensors.

[7]  M. C. Tracey,et al.  Mechanical characterization of bulk Sylgard 184 for microfluidics and microengineering , 2014 .

[8]  Yong-Ho Choa,et al.  Conductive rubber materials for pressure sensors , 2001 .

[9]  Seiji Akita,et al.  Highly selective flexible tactile strain and temperature sensors against substrate bending for an artificial skin , 2015 .

[10]  Gordon Cheng,et al.  Humanoid Multimodal Tactile-Sensing Modules , 2011, IEEE Transactions on Robotics.

[11]  Alberto J. Palma,et al.  A printed capacitive–resistive double sensor for toluene and moisture sensing , 2015 .

[12]  Alberto J. Palma,et al.  Design and characterization of a low thermal drift capacitive humidity sensor by inkjet-printing , 2014 .

[13]  T. Arie,et al.  Fully printed flexible fingerprint-like three-axis tactile and slip force and temperature sensors for artificial skin. , 2014, ACS nano.

[14]  Larry K. Baxter,et al.  Capacitive Sensors: Design and Applications , 1996 .

[15]  Benjamin C. K. Tee,et al.  25th Anniversary Article: The Evolution of Electronic Skin (E‐Skin): A Brief History, Design Considerations, and Recent Progress , 2013, Advanced materials.

[16]  A. Palma,et al.  Properties and Printability of Inkjet and Screen-Printed Silver Patterns for RFID Antennas , 2014, Journal of Electronic Materials.

[17]  Sunwoo Woo,et al.  A thin all-elastomeric capacitive pressure sensor array based on micro-contact printed elastic conductors , 2014 .

[18]  Paolo Lugli,et al.  Flexible Capacitive Tactile Sensors Based on Carbon Nanotube Thin Films , 2015, IEEE Sensors Journal.

[19]  P. Veltink,et al.  The mechanical properties of the rubber elastic polymer polydimethylsiloxane for sensor applications , 1997 .

[20]  Paolo Lugli,et al.  Integrating CNT force sensors into a multimodal modular electronic skin , 2015, 2015 IEEE 15th International Conference on Nanotechnology (IEEE-NANO).

[21]  Benjamin C. K. Tee,et al.  Flexible polymer transistors with high pressure sensitivity for application in electronic skin and health monitoring , 2013, Nature Communications.

[22]  A. Mata,et al.  Characterization of Polydimethylsiloxane (PDMS) Properties for Biomedical Micro/Nanosystems , 2005, Biomedical microdevices.

[23]  Benjamin C. K. Tee,et al.  Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes. , 2011, Nature nanotechnology.

[24]  Giulio Sandini,et al.  Tactile Sensing—From Humans to Humanoids , 2010, IEEE Transactions on Robotics.

[25]  Hyunhyub Ko,et al.  Piezoresistive Tactile Sensor Discriminating Multidirectional Forces , 2015, Sensors.

[26]  Takao Someya,et al.  A large-area, flexible pressure sensor matrix with organic field-effect transistors for artificial skin applications. , 2004, Proceedings of the National Academy of Sciences of the United States of America.

[27]  Gordon Cheng,et al.  Directions Toward Effective Utilization of Tactile Skin: A Review , 2013, IEEE Sensors Journal.

[28]  G. Whitesides,et al.  Solvent compatibility of poly(dimethylsiloxane)-based microfluidic devices. , 2003, Analytical chemistry.

[29]  F. Smits.  Measurement of sheet resistivities with the four-point probe , 1958 .

[30]  Yonggang Huang,et al.  Silicon nanomembranes for fingertip electronics , 2012, Nanotechnology.

[31]  L. Lorenzelli,et al.  Bendable piezoresistive sensors by screen printing MWCNT/PDMS composites on flexible substrates , 2014, 2014 10th Conference on Ph.D. Research in Microelectronics and Electronics (PRIME).

[32]  Masayuki Inaba,et al.  Development of functional whole-body flesh with distributed three-axis force sensors to enable close interaction by humanoids , 2007, 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[33]  J. Engel,et al.  Polymer micromachined multimodal tactile sensors , 2005 .

[34]  Kwang-Seok Yun,et al.  All-polymer hair structure with embedded three-dimensional piezoresistive force sensors , 2012 .

[35]  Ming-Yih Lee,et al.  Development of a flexible PDMS capacitive pressure sensor for plantar pressure measurement , 2012 .