Carbody elastic vibrations of high-speed vehicles caused by bogie hunting instability

ABSTRACT In particular locations of the high-speed track, the worn wheel profile matched up with the worn rail profile will lead to an extremely high-conicity wheel–rail contact. Consequently, the bogie hunting instability arises, which further results in the so-called carbody shaking phenomenon. In this paper, the carbody elastic vibrations of a high-speed vehicle in service are firstly introduced. Modal tests are conducted to identity the elastic modes of the carbody. The ride comfort and running safety indices for the tested vehicle are evaluated. The rigid–flexible coupling dynamic model for the high-speed passenger car is then developed by using the FE and MBS coupling approach. The rail profiles in those particular locations are measured and further integrated into the simulation model to reproduce the bogie hunting and carbody elastic vibrations. The effects of wheel and rail wear on the vehicle system response, e.g. wheelset bifurcation graph and carbody vibrations, are studied. Two improvement measures, including the wheel profile modification and rail grinding, are proposed to provide possible solutions. It is found that the wheel–rail contact conicity can be lowered by decreasing wheel flange thickness or grinding rail corner, which is expected to improve the bogie hunting stability under worn rail and worn wheel conditions. The carbody elastic vibrations caused by bogie hunting instability can be further restrained.

[1]  Michael Beitelschmidt,et al.  Standard input data for FEM–MBS coupling: importing alternative model reduction methods into SIMPACK , 2009 .

[2]  Hans True.  Does a critical speed for railroad vehicles exist? , 1994, Proceedings of IEEE/ASME Joint Railroad Conference.

[3]  Oldrich Polach,et al.  Application Of Nonlinear Stability Analysis in Railway Vehicle Industry , 2009 .

[4]  Pelle Carlbom.  Carbody and Passengers in Rail Vehicle Dynamics , 2000 .

[5]  Rosario Chamorro,et al.  A multi-body system approach for finite-element modelling of rail flexibility in railroad vehicle applications , 2008 .

[6]  Tadao Takigami,et al.  Reduction of bending vibration in railway vehicle carbodies using carbody–bogie dynamic interaction , 2010 .

[7]  Oldrich Polach,et al.  Characteristic parameters of nonlinear wheel/rail contact geometry , 2010 .

[8]  Ren Li-hui,et al.  Vibration Reduction Analysis of the Dynamic Vibration Absorber on the Flexible Carbody of Railway Vehicles , 2009 .

[9]  Peter Lugner,et al.  Comfort enhancement by an active vibration reduction system for a flexible railway car body , 2007 .

[10]  Luo Ren.  Vibration Analysis of Railway Passenger Car Systems by Considering Flexible Carbody Effect , 2007 .

[11]  Stefano Bruni,et al.  LATERAL DYNAMICS OF A RAILWAY VEHICLE IN TANGENT TRACK AND CURVE: TESTS AND SIMULATION , 1999 .

[12]  Jing Zeng,et al.  Influence of equipment excitation on flexible carbody vibration of EMU , 2014 .

[13]  Gunter Schupp,et al.  Bifurcation Analysis of Railway Vehicles , 2006 .

[14]  O. Wallrapp.  Flexible Bodies in Multibody System Codes , 1998 .

[15]  O Polach,et al.  On non-linear methods of bogie stability assessment using computer simulations , 2006 .

[16]  Tadao Takigami,et al.  Numerical analysis of three-dimensional flexural vibration of railway vehicle car body , 2006 .

[17]  Willy Govaerts,et al.  MATCONT: A MATLAB package for numerical bifurcation analysis of ODEs , 2003, TOMS.

[18]  A. H. Wickens.  The dynamic stability of a simplified four-wheeled railway vehicle having profiled wheels , 1965 .

[19]  R. Guyan.  Reduction of stiffness and mass matrices , 1965 .