Cyclic testing and assessment of shape memory alloy recentering systems

[1]  Fabrizio Paolacci,et al.  Design of yielding or friction-based dissipative bracings for seismic protection of buildings , 1995 .

[2]  Reginald DesRoches,et al.  Seismic Assessment of Concentrically Braced Steel Frames with Shape Memory Alloy Braces , 2007 .

[3]  Donatello Cardone,et al.  SMA-based tension control block for metallic tendons , 2009 .

[4]  Roberto T. Leon,et al.  Steel Beam-Column Connections using Shape Memory Alloys , 2004 .

[5]  Reginald DesRoches,et al.  Seismic retrofit of simply supported bridges using shape memory alloys , 2002 .

[6]  Ramesh Chandra,et al.  Active shape control of composite blades using shape memory actuation , 2001 .

[7]  G. Cheok,et al.  Performance of Precast Concrete Beam-to-Column Connections Subject to Cyclic Loading , 1991 .

[8]  Gregory G. Deierlein,et al.  Steel-Framed Rocking Structural Systems for Moderate Seismic Zones , 2009 .

[9]  H. S. Lew,et al.  Seismic Performance Behavior of Precast Concrete Beam-Column Joints , 1993 .

[10]  Hisaaki Tobushi,et al.  Influence of strain rate on superelastic properties of TiNi shape memory alloy , 1998 .

[11]  Ken Gall,et al.  The Influence of Aging on Critical Transformation Stress Levels and Martensite Start Temperatures in NiTi: Part II—Discussion of Experimental Results , 1999 .

[12]  Songye Zhu,et al.  Seismic Response Control of Building Structures with Superelastic Shape Memory Alloy Wire Dampers , 2008 .

[13]  Berk Taftali.  Probabilistic seismic demand assessment of steel frames with shape memory alloy connections , 2007 .

[14]  Reginald DesRoches,et al.  Structural Engineering with NiTi . II: Mechanical Behavior and Scaling , 2007 .

[15]  Andre Filiatrault,et al.  Posttensioned Energy Dissipating Connections for Moment-Resisting Steel Frames , 2002 .

[16]  Mauro DOLCE,et al.  PASSIVE SEISMIC DEVICES BASED ON SHAPE MEMORY ALLOYS , 1999 .

[17]  Maurizio Indirli,et al.  Progress of application, research and development, and design guidelines for shape memory alloy devices for cultural heritage structures in Italy , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[18]  C. Valente,et al.  Shaking table tests on reinforced concrete frames without and with passive control systems , 2005 .

[19]  Arata Masuda,et al.  Optimization of hysteretic characteristics of damping devices based on pseudoelastic shape memory alloys , 2002 .

[20]  Shuichi Miyazaki,et al.  Cyclic stress-strain characteristics of TiNi and TiNiCu shape memory alloys , 1995 .

[21]  Steven J. Savage,et al.  ENGINEERING ASPECTS OF SHAPE MEMORY ALLOYS , 1991 .

[22]  James A. Swanson,et al.  BOLTED STEEL CONNECTIONS: TESTS ON T-STUB COMPONENTS , 2000 .

[23]  K. Wu,et al.  The effect of strain rate on detwinning and superelastic behavior of NiTi shape memory alloys , 1996 .

[24]  Hardy Cross,et al.  Engineers and ivory towers , 1952 .

[25]  Bradley W. Penar,et al.  Recentering Beam-Column Connections Using Shape Memory Alloys , 2005 .

[26]  Scott M. Adan,et al.  Inelastic Cyclic Testing of the Kaiser Bolted Bracket Moment Connection , 2008 .

[27]  Andrew S. Whittaker,et al.  Testing of Passive Energy Dissipation Systems , 1993 .

[28]  Songye Zhu,et al.  Seismic Analysis of Concentrically Braced Frame Systems with Self-Centering Friction Damping Braces , 2008 .

[29]  Reginald DesRoches,et al.  Shape Memory Alloy Tension/Compression Device for Seismic Retrofit of Buildings , 2009, Journal of Materials Engineering and Performance.

[30]  Mohammad Noori,et al.  Random vibration studies of an SDOF system with shape memory restoring force , 2000 .

[31]  E. J. Graesser,et al.  Shape‐Memory Alloys as New Materials for Aseismic Isolation , 1991 .

[32]  H. Tobushi,et al.  Cyclic characteristics of pseudoelasticity of Ti-Ni alloys (effect of maximum strain, test temperature and shape memory processing temperature) , 1991 .

[33]  J. Wang,et al.  Pseudo-Elasticity and Shape Memory Effect on the TiNiCoV Alloy , 2000 .

[34]  Ricardo Herrera,et al.  Steel beam–column connection using copper-based shape memory alloy dampers , 2008 .

[35]  Donatello Cardone,et al.  Experimental static and dynamic response of a real r/c frame upgraded with SMA re-centering and dissipating braces , 2004 .

[36]  Donatello Cardone,et al.  Theoretical and Experimental Studies for the Application of Shape Memory Alloys in Civil Engineering , 2006 .

[37]  Stefan Seelecke.  Dynamics of a SDOF system with shape memory element , 2000, Smart Structures.

[38]  W. W. Wright,et al.  Materials science and engineering. An introduction 2nd Edition W. D. Callister, Jr John Wiley & Sons, New York, 1991. pp. xxi + 791, price E53.00. ISBN 0‐471‐50488‐2 , 1993 .

[39]  Thomas M. Murray.  Recent developments for the design of moment end-plate connections , 1988 .

[40]  E. Sacco,et al.  A one-dimensional model for superelastic shape-memory alloys with different elastic properties between austenite and martensite , 1997 .

[41]  Gangbing Song,et al.  Seismic response control of frame structure braced with SMA tendons , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[42]  C. M. Jackson,et al.  55-Nitinol - The Alloy with a Memory: It's Physical Metallurgy Properties, and Applications. NASA SP-5110 , 1972 .

[43]  Reginald DesRoches,et al.  Testing of Superelastic Recentering Pre-Strained Braces for Seismic Resistant Design , 2007 .

[44]  Dong Wang.  Numerical and experimental studies of self-centering post-tensioned steel frames , 2007 .

[45]  R. G. Tyler.  Preliminary tests on an energy absorbing element for braced structures under earthquake loading , 1983 .

[46]  G. D. Canio,et al.  EXPERIMENTAL VERIFICATIONS OF SEISMIC PROTECTION OF STEEL AND R.C. STRUCTURES AT ENEA-CASACCIA SHAKING TABLES , 2002 .

[47]  Y. Suzuki,et al.  Applications of Shape Memory Alloys in Japan , 2000 .

[48]  T. Tadaki,et al.  Shape Memory Alloys , 2002 .

[49]  Yukio Adachi,et al.  Development of shape memory alloy damper for intelligent bridge systems , 1999, Smart Structures.

[50]  Cedric Marsh,et al.  RESPONSE OF FRICTION DAMPED BRACED FRAMES , 1982 .

[51]  Shuichi Miyazaki,et al.  Effect of mechanical cycling on the pseudoelasticity characteristics of TiNi and TiNiCu alloys , 1995 .

[52]  C. M. Wayman,et al.  Shape-Memory Materials , 2018 .

[53]  M. Dolce,et al.  Mechanical behaviour of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension , 2001 .

[54]  K. Gall,et al.  The influence of aging on critical transformation stress levels and martensite start temperatures , 1999 .

[55]  T. W. Duerig,et al.  An Introduction to Martensite and Shape Memory , 1990 .

[56]  Salvatore Perno,et al.  Design, test and analysis of a light‐weight dissipative bracing system for seismic protection of structures , 2007 .

[57]  Amr S. Elnashai,et al.  Special metals for seismic retrofitting of steel buildings , 2003 .

[58]  Reginald DesRoches,et al.  CYCLIC PROPERTIES OF SUPERELASTIC SHAPE MEMORY ALLOY WIRES AND BARS , 2004 .

[59]  Constantin Christopoulos,et al.  Seismic Response of Multistory Buildings with Self-Centering Energy Dissipative Steel Braces , 2008 .

[60]  Reginald DesRoches,et al.  Sensitivity of Seismic Applications to Different Shape Memory Alloy Models , 2008 .

[61]  James M. Kelly,et al.  Experimental and analytical studies of shape-memory alloy dampers for structural control , 1995, Smart Structures.

[62]  K. Weinert,et al.  Machining of NiTi based shape memory alloys , 2004 .

[63]  M. J. N. Priestley,et al.  Seismic tests of precast beam-to-column joint subassemblages with unbonded tendons , 1996 .

[64]  Andre Filiatrault,et al.  Seismic response of self‐centring hysteretic SDOF systems , 2002 .

[65]  K. Shimizu,et al.  Pseudoelasticity and shape memory effects in alloys , 1986 .

[66]  Donatello Cardone,et al.  SMA recentering devices for seismic isolation of civil structures , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[68]  S. Miyazaki,et al.  Thermal and Stress Cycling Effects and Fatigue Properties of Ni-Ti Alloys , 1990 .

[69]  Robert Tremblay,et al.  Self-Centering Energy Dissipative Bracing System for the Seismic Resistance of Structures: Development and Validation , 2008 .

[70]  Reginald DesRoches,et al.  The effect of training, pre-straining, and loading history on the properties of NiTi shape memory alloys for protective systems in civil structures , 2006 .

[71]  Reginald DesRoches,et al.  Effect of mechanical training on the properties of superelastic shape memory alloys for seismic applications , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[72]  Ken Gall,et al.  Thermal processing of polycrystalline NiTi shape memory alloys , 2005 .

[73]  Paolo Clemente,et al.  Demo-application of shape memory alloy devices: the rehabilitation of the S. Giorgio Church bell tower , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[74]  Reginald DesRoches,et al.  Unseating prevention for multiple frame bridges using superelastic devices , 2005 .

[75]  Donatello Cardone,et al.  Implementation and testing of passive control devices based on shape memory alloys , 2000 .

[76]  H. Tobushi,et al.  Cyclic Superelastic Deformation of TiNi Shape-Memory Alloy , 2002 .

[77]  Richard Sause,et al.  Posttensioned Seismic-Resistant Connections for Steel Frames , 2001 .

[78]  John C. Wilson,et al.  Shape Memory Alloys for Seismic Response Modification: A State-of-the-Art Review , 2005 .

[79]  Roberto T. Leon,et al.  Design and behavior of zipper-braced frames , 2008 .

[80]  R. G. Tyler,et al.  Further notes on a steel energy-absorbing element for braced frameworks , 1985 .

[81]  Reginald DesRoches,et al.  Structural engineering with niti. I Basic materials characterization , 2007 .

[82]  Charles H. Beauchamp,et al.  Shape memory alloy adjustable camber (SMAAC) control surfaces , 1992, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[83]  Shuichi Miyazaki,et al.  Effect of cyclic deformation on the pseudoelasticity characteristics of Ti-Ni alloys , 1986 .

[84]  T. Shield,et al.  Microstructure in the cubic to monoclinic transition in titanium–nickel shape memory alloys , 1999 .

[85]  X. Zu,et al.  Effect of thermomechanical training temperature on the two-way shape memory effect of TiNi and TiNiCu shape memory alloys springs , 2003 .