Manufacturing characteristics of the continuous tow shearing method for manufacturing of variable angle tow composites

Automated fibre placement (AFP) is well-known as a cutting-edge technology for manufacturing variable angle tow (VAT) composites with tailored fibre paths. However, its process-induced defects prevent the wide application of VAT composite structures. As an alternative manufacturing method, the continuous tow shearing (CTS) technique, utilising the ability to shear dry tows, has been developed. It was shown that CTS could significantly reduce process-induced defects such as fibre wrinkling, resin rich areas and fibre discontinuities. In this paper, its manufacturing characteristics such as material characteristics, layup accuracy, and thickness variation are investigated experimentally.

[1]  Paul M. Weaver,et al.  Buckling analysis and optimisation of variable angle tow composite plates , 2012 .

[2]  James H. Starnes,et al.  Structural Response of Compression-Loaded, Tow-Placed, Variable Stiffness Panels , 2002 .

[4]  Z. Gürdal,et al.  In-plane response of laminates with spatially varying fiber orientations - Variable stiffness concept , 1993 .

[5]  Dawn C. Jegley,et al.  Automated Finite Element Analysis of Elastically-Tailored Plates , 2013 .

[6]  Paul M. Weaver,et al.  Postbuckling analysis of variable angle tow composite plates under shear load , 2013 .

[7]  Paul M. Weaver,et al.  Continuous tow shearing for manufacturing variable angle tow composites , 2012 .

[8]  Dawn C. Jegley,et al.  Design and Manufacture of Elastically Tailored Tow Placed Plates , 2002 .

[9]  Zafer Gurdal,et al.  A Theoretical Model to Study the Influence of Tow-drop Areas on the Stiffness and Strength of Variable-stiffness Laminates , 2009 .

[10]  Z. Gurdal,et al.  Design and Manufacture of a Variable-Stiffness Cylindrical Shell , 2009 .

[11]  H. A. Kim,et al.  Buckling Optimization of Variable Angle Tow Panels Using Exact Strip Models , 2012 .

[12]  Damiano Pasini,et al.  Optimization of variable stiffness composites with embedded defects induced by Automated Fiber Placement , 2014 .

[13]  Damiano Pasini,et al.  Experimental study of the effect of automated fiber placement induced defects on performance of composite laminates , 2011 .

[14]  Damiano Pasini,et al.  Defect layer method to capture effect of gaps and overlaps in variable stiffness laminates made by Automated Fiber Placement , 2013 .

[15]  Paul M. Weaver,et al.  Prebuckling and buckling analysis of variable angle tow plates with general boundary conditions , 2012 .

[16]  Lockheed Martin,et al.  Design and Manufacturing of Tow-Steered Composite Shells Using Fiber Placement , 2009 .

[17]  J.-B. Le Cam,et al.  Modelling slit tape buckling during automated prepreg manufacturing: A local approach , 2011 .

[18]  K. Potter,et al.  The engineering aspects of automated prepreg layup: History, present and future , 2012 .

[19]  K. Potter,et al.  Multi-tow shearing mechanism for high-speed manufacturing of variable angle tow composites , 2012 .

[20]  Paul M. Weaver,et al.  Limitations of fibre placement techniques for variable angle tow composites and their process-induced defects , 2011 .

[21]  Constantina Lekakou,et al.  Shear deformation and micromechanics of woven fabrics , 2000 .

[22]  A. Sawicki,et al.  THE EFFECT OF INTRAPLY OVERLAPS AND GAPS UPON THE COMPRESSION STRENGTH OF COMPOSITE LAMINATES , 1998 .