Bioleaching of metals from steel slag by Acidithiobacillus thiooxidans culture supernatant.

The generation of 300–500 kg of slag per ton of the steel produced is a formidable amount of solid waste available for treatment. They usually contain considerable quantities of valuable metals. In this sense, they may become either important secondary resource if processed in eco-friendly manner for secured supply of contained metals or potential pollutants, if not treated properly. It is possible to recover metals from steel slag by applying bioleaching process. Electric arc furnace (EAF) slag sample was used for bioleaching of metals. In the present study, before bioleaching experiment water washing of an EAF slag was carried out. This reduced slag pH from 11.2 to 8.3. Culture supernatants of Acidithiobacillus thiooxidans (At. thiooxidans), Acidithiobacillus ferrooxidans (At. ferrooxidans), and Aspergillus niger (A. niger) were used for metal solubilization. At. thiooxidans culture supernatant containing 0.016 M sulfuric acid was found most effective for bioleaching of metals from an EAF slag. Maximum metal extraction was found for Mg (28%), while it was least for Mo (0.1%) in six days. Repeated bioleaching cycles increased metal recovery from 28% to 75%, from 14% to 60% and from 11% to 27%, for Mg, Zn and Cu respectively.

[1]  H. Hocheng,et al.  Extraction of silver from spent silver oxide–zinc button cells by using Acidithiobacillus ferrooxidans culture supernatant , 2013 .

[2]  C. Solisio,et al.  Bioleaching of zinc and aluminium from industrial waste sludges by means of Thiobacillus ferrooxidans. , 2002, Waste management.

[3]  Y. Ting,et al.  Fungal bioleaching of incineration fly ash: Metal extraction and modeling growth kinetics , 2009 .

[4]  K. Bosecker,et al.  Bioleaching: metal solubilization by microorganisms , 1997 .

[5]  H. Hocheng,et al.  Microbial Leaching of Waste Solder for Recovery of Metal , 2014, Applied Biochemistry and Biotechnology.

[6]  H. Hocheng,et al.  Use of Aspergillus niger 34770 culture supernatant for tin metal removal , 2014 .

[7]  T. O. Shepker,et al.  Physical and chemical characteristics of blast furnace, basic oxygen furnace, and electric arc furnace steel industry slags. , 2000 .

[8]  Olli H. Tuovinen,et al.  Acid bioleaching of solid waste materials from copper, steel and recycling industries , 2010 .

[9]  Lu Anhuai,et al.  Experimental Study on Formation Conditions of Ammoniojarosite and Its Environmental Significance , 2006 .

[10]  D. Matýsek,et al.  Zinc recovery from steel-making wastes by acid pressure leaching and hematite precipitation , 2010 .

[11]  D. Karamanev,et al.  Formation of jarosite during Fe2+ oxidation by Acidithiobacillus ferrooxidans , 2006 .

[12]  R. Tyagi,et al.  Cooperation between two Thiobacillus strains for heavy-metal removal from municipal sludge. , 1992, Canadian journal of microbiology.

[13]  Hong Hocheng,et al.  Innovative use of biologically produced ferric sulfate for machining of copper metal and study of specific metal removal rate and surface roughness during the process , 2013 .

[14]  J. Gomes,et al.  Lixiviación de metales pesados a partir de escorias de acero , 2006 .

[15]  Paul F. Ziemkiewicz,et al.  STEEL SLAG: APPLICATIONS FOR AMD CONTROL , 1998 .

[16]  Chandra Sekhar Gahan,et al.  Comparative study on different steel slags as neutralising agent in bioleaching , 2009 .

[17]  O. Bayat,et al.  Bioleaching of Zinc and Iron from Steel Plant Waste using Acidithiobacillus Ferrooxidans , 2009, Applied biochemistry and biotechnology.